scholarly journals Spatial Decomposition of a Broadband Pulse Caused by Strong Frequency Dispersion of Sound in Acoustic Metamaterial Superlattice

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 125
Author(s):  
Yuqi Jin ◽  
Yurii Zubov ◽  
Teng Yang ◽  
Tae-Youl Choi ◽  
Arkadii Krokhin ◽  
...  
Keyword(s):  
Acoustic Pulse ◽  
Frequency Dispersion ◽  
Transmission Band ◽  
Lateral Position ◽  
Operating Frequency ◽  
Frequency Range ◽  
Frequency Spectra ◽  
Acoustic Metamaterial ◽  
Superlattice Structure ◽  
Broadband Pulse

An acoustic metamaterial superlattice is used for the spatial and spectral deconvolution of a broadband acoustic pulse into narrowband signals with different central frequencies. The operating frequency range is located on the second transmission band of the superlattice. The decomposition of the broadband pulse was achieved by the frequency-dependent refraction angle in the superlattice. The refracted angle within the acoustic superlattice was larger at higher operating frequency and verified by numerical calculated and experimental mapped sound fields between the layers. The spatial dispersion and the spectral decomposition of a broadband pulse were studied using lateral position-dependent frequency spectra experimentally with and without the superlattice structure along the direction of the propagating acoustic wave. In the absence of the superlattice, the acoustic propagation was influenced by the usual divergence of the beam, and the frequency spectrum was unaffected. The decomposition of the broadband wave in the superlattice’s presence was measured by two-dimensional spatial mapping of the acoustic spectra along the superlattice’s in-plane direction to characterize the propagation of the beam through the crystal. About 80% of the frequency range of the second transmission band showed exceptional performance on decomposition.

scholarly journals Bioimpedance Analysis of L929 and HaCaT Cells in Low Frequency Range

2018 ◽  
Vol 4 (1) ◽  
pp. 115-118 ◽  
Author(s):  
Viviane S. Teixeira ◽  
Jan-Patrick Kalckhoff ◽  
Wolfgang Krautschneider ◽  
Dietmar Schroeder
Keyword(s):  
Low Frequency ◽  
Steel Corrosion ◽  
Frequency Dispersion ◽  
Human Keratinocytes ◽  
Cell Types ◽  
Hacat Cells ◽  
Frequency Range ◽  
Corrosion Resistant ◽  
L929 Mouse

AbstractIn this work, Bioimpedance Spectroscopy (BIS) is used to study fluids and cell solutions. A n ew fourelectrode- terminal (4T) chamber using 3D printing and stainless steel corrosion resistant V4A was designed to measure the impedance of live cell solutions at the frequency range 0.1Hz- 1MHz. At f < 1kHz the double layer (DL) that builds at electrode’s surface raises the impedance substantially preventing the observation of the real impedance of the cells. The new 4T design circumvents the DL, is more robust and cheap, and allows for the repeatability of the results. Experiments were performed in vitro with two cell lines, L929 (mouse fibroblasts) and HaCaT (human keratinocytes). Results show that it is possible to distinguish between the two cell types by means of its BIS measurements in the new setup. Also, a low-frequency dispersion (α-dispersion) was observed in HaCaT cells solution, but not in L929. Furthermore, a potentiostat circuit model was developed in LTSpice to simulate the hardware setup and two different circuit models were used to fit cell’s data.

A composite and deformable honeycomb acoustic metamaterial

2018 ◽  
Vol 32 (20) ◽  
pp. 1850204 ◽  
Author(s):  
Nansha Gao ◽  
Hong Hou ◽  
Jiu Hui Wu
Keyword(s):  
Transmission Loss ◽  
Tensile Deformation ◽  
Ethylene Vinyl Acetate ◽  
Sound Insulation ◽  
Frequency Range ◽  
Low Frequencies ◽  
Acoustic Metamaterial ◽  
Copolymer Films ◽  
Insulation Effect ◽  
Experiment Analysis

This paper reports the design of a deformable honeycomb acoustic metamaterial, which consists of honeycomb structures and ethylene-vinyl acetate (EVA) copolymer films stacked on each other. The FEA results agree well with the experiment analysis, and it is proved that the proposed structure can break the acoustic mass law below 1000 Hz. This paper reveals that dislocation, compression, and tensile deformation can regulate the sound transmission loss (STL) in a wider frequency range. It is concluded that the STL of a bilayer structure is, on average, 10 dB higher than that of a monolayer structure at low-frequencies. When the dislocation distance b = 1.5 mm, the corresponding STLs reach their maximum values. The FEA and experiment results prove that compression and tensile deformation can considerably improve the sound insulation effect. Such a deformable honeycomb acoustic metamaterial with high STL provides a new concept for engineering noise control.

Extracting Maximum Power in the Presence of Internal Inductance of Electromagnetic Energy Harvesting Systems

2020 ◽  
Author(s):  
Yamini Sharma ◽  
Lei Zuo
Keyword(s):  
Energy Harvesting ◽  
Electromagnetic Energy ◽  
Maximum Power ◽  
Operating Frequency ◽  
Frequency Range ◽  
Low Frequencies ◽  
Internal Inductance ◽  
Piezoelectric Energy ◽  
Operating Frequency Range ◽  
Electromagnetic Energy Harvesting

Abstract In this paper, the effect of internal inductance of electromagnetic generators in the field of energy harvesting is discussed. Electromagnetic energy harvesters are typically operated at low frequencies. This results in the generator internal inductor impedance being significantly less than the generator internal resistance. However, at high frequencies, this inductance can no longer be ignored. Therefore, to maximize the harvested power, the internal inductance must be considered while designing the power electronics. This paper presents two methods to tackle this issue. The first method involves making use of a discrete capacitor which is able to reduce the inductance effect not just at resonant frequency but for the entire operating frequency range. The second method makes use of a concept similar to synchronized switching harvesting on inductors (SSHI) in piezoelectric energy harvesting. A capacitor and switch are added in the electromagnetic energy harvesting circuit to reduce the generator internal inductance effect. This method not only provides the benefit of performing well in the entire operating frequency range but also eliminates the need for precise maximum power tracking techniques, which further helps in reducing the circuit losses. Simulation results show a maximum power output increase of 56%.

scholarly journals Dispersive changes in magnetic background noise polarization at 0.1 to 6Hz during sunset and sunrise at L=1.3

2004 ◽  
Vol 22 (6) ◽  
pp. 1989-2000 ◽  
Author(s):  
T. Bösinger ◽  
S. L. Shalimov
Keyword(s):  
Background Noise ◽  
Azimuthal Angle ◽  
Low Frequency ◽  
Frequency Dispersion ◽  
Major Axis ◽  
Resonance Structure ◽  
Frequency Range ◽  
Ionosphere Model ◽  
F Region ◽  
E Region

Abstract. Polarization properties of the magnetic background noise (MBN) and the spectral resonance structure (SRS) of the ionospheric Alfvén resonator (IAR) below the first Schumann resonance but above 0.1 Hz are measured by a sensitive pulsation magnetometer at the island of Crete (L=1.3) and analyzed using the existing SRS theory by Belyaev et al. (1989b). The focus of the paper is on the systematic changes in the MBN and SRS properties associated with the transition from a sunlit to a dark ionosphere (sunset) and vice versa (sunrise). We are able to pinpoint in observations an E-region and F-region terminator effect and to simulate it by means of a simple ionosphere model, implying the formalism given by Belyaev et al. (1989b). The E-region terminator effect is associated with an apparent control for the SRS presence or absence with no clear frequency dispersion in polarization properties, whereas the F-region terminator effect exhibits strong frequency dispersion, especially in the low frequency range. This yields a change in the ellipticity of MBN, starting as early as 2 to 3h ahead of the "zero-line" of the terminator. In a 24h presentation of the ellipticity versus frequency and time, the sunrise/sunset effect produces a sharp, dispersive boundary between night and day (day and night). Only inside this boundary, during the night hours, is SRS observed, at times accompanied by a large quasi-periodic long period modulation in the azimuthal angle of the major axis of the polarization ellipse. Attention is also paid to peculiarities in the low frequency range (~0.1Hz), where especially large changes in the polarization properties occur in association with the passage of the terminator. The F-region effect is very distinct and well reproduced by our simple model. Changes in the azimuth associated with the E-region terminator effect are of the order of 20&amp;deg.

PERFORMANCE ANALYSIS OF AN ENGINE MOUNT FEATURING ER FLUIDS AND PIEZOACTUATORS

1996 ◽  
Vol 10 (23n24) ◽  
pp. 3143-3157 ◽  
Author(s):  
S.H. CHOI ◽  
Y.T. CHOI ◽  
S.B. CHOI ◽  
C.C. CHEONG
Keyword(s):  
Electric Field ◽  
Frequency Domain ◽  
Control Technique ◽  
Operating Frequency ◽  
Frequency Range ◽  
Engine Mounts ◽  
Operating Frequency Range ◽  
Engine Mount ◽  
Er Fluids ◽  
Er Fluid

Conventional rubber mounts and various types of passive or semi-active hydraulic engine mounts for a passenger vehicle have their own functional aims on the limited frequency band in the broad engine operating frequency range. In order to achieve high system performance over all frequency ranges of the engine operation, a new type of engine mount featuring electro-rheological(ER) fluids and piezoactuators is proposed in this study. A mathematical model of the proposed engine mount is derived using the bond graph method which is inherently adequate to model the interconnected hydromechanical system. In the low frequency domain, the ER fluid is activated upon imposing an electric field for vibration isolation while the piezoactuator is activated in the high frequency domain. A neuro-control algorithm is utilized to determine control electric field for the ER fluid, and H∞ control technique is adopted for the piezoactuator Comparative works between the proposed and single-actuating(ER fluid only or piezoactuator only) engine mounts are undertaken by evaluating force transmissibility over a wide operating frequency range.

Sign in / Sign up

Export Citation Format

Share Document