scholarly journals Ultrasound-Assisted Surface Modification of MWCNT Using Organic Acids

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 72
Author(s):  
Patricia A. de León-Martínez ◽  
Aidé Sáenz-Galindo ◽  
Carlos A. Ávila-Orta ◽  
Adalí O. Castañeda-Facio ◽  
Marlene L. Andrade-Guel ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Organic Acids ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Surface Defects ◽  
Low Frequency ◽  
Carbon Surface ◽  
X Ray ◽  
Different Types ◽  
Surface Modified

In the present work, multiple-wall carbon nanotubes (MWCNTs) were surface modified in an environmentally friendly way, using low-frequency ultrasonic energy. This type of modification was carried-out using two different types of organic acids, citric acid (CA) and oxalic acid (OA). The modification of the MWCNTs was confirmed by Fourier-transform infrared spectroscopy (FTIR), where functional groups such as OH, C=O, O–C=O and COOH were detected. By means of Raman spectroscopy, an increase in carbon surface defects was found. On the other hand, using X-ray photoelectron spectroscopy (XPS), oxidation was evidenced on the surface of the modified MWCNT. In both Raman spectroscopy and XPS, the results indicate a greater modification when CA is used, possibly due to the fact that CA has a larger number of functional groups. MWCNT-CA showed good dispersion in methanol, while MWCNT-OA showed good stability in methanol and ethanol. Finally, a 20% removal of creatinine efficiency improvement was found with respect to the unmodified MWCNTs, while no improvement was found in the case of urea and uric acid.

Influence of Functionalization of Multi-Walled Carbon Nanotubes on the Properties of Ethylene Vinyl Acetate Nanocomposites

2008 ◽  
Vol 8 (4) ◽  
pp. 1913-1921 ◽  
Author(s):  
Jinu Jacob George ◽  
Rajatendu Sengupta ◽  
Anil K. Bhowmick
Keyword(s):  
Carbon Nanotubes ◽  
Vinyl Acetate ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Surface Defects ◽  
Ethylene Vinyl Acetate ◽  
Radial Breathing Mode ◽  
Multiwalled Carbon ◽  
Band Ratio ◽  
X Ray

Commercially available multiwalled carbon nanotubes (MWNT) were chemically modified by amine, acid and silane and their ethylene vinyl acetate (EVA) based nanocomposites were prepared. Unmodified and modified nanotubes were characterized by thermogravimetry, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy. Early degradation of modified nanotubes from the thermogravimetry study proved the presence of functional groups on nanotube surface. Increase in D-band to G-band ratio and a shift in radial breathing mode peaks from the Raman spectra indicated the generation of surface defects due to functionalization and variation in van der Waals force of attraction between nanotube aggregates on modification. The unmodified nanotubes improved the tensile strength by 30% with 4 weight% of filler. Amine modification imparted further increase in strength due to the presence of functional groups on the nanotube surface and the subsequent better dispersion of the nanotubes in the polymer matrix. The silane treatment imparted maximum improvement in various properties of the nanocomposites. The nanotubes provided better thermal degradation stability and also higher thermal conductivity to virgin EVA. The results were well supported by the morphological as well as swelling study of the various samples.

scholarly journals Oxygen/Carbon Ratio Effects on Surface-Modified Carbon Nanotubes

2008 ◽  
Vol 2 ◽  
pp. 77-84 ◽  
Author(s):  
U.S. Chen ◽  
Heng Yi Su ◽  
Chung Hao Wang ◽  
Han Chang Shih ◽  
Chien Te Hsieh ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Simple Method ◽  
X Ray ◽  
Oxygen Treatment ◽  
Gauss Function ◽  
Cnts Surface ◽  
Surface Modified ◽  
Modified Carbon Nanotubes

Carbon nanotubes (CNTs) were functionalized using a simple method of heat treatment under oxygen atmosphere followed by an immersion in a tin nitrate aqueous solution. And well-dispersed SnOx nanodots were decorated on the surface of CNTs. X-ray photoelectron spectroscopy (XPS) analysis showed that the O/C ratio increases with oxygen-treated time. The distribution of carbon-containing functional groups on the CNTs surface, i.e., C−C, C−O, C=O, O−C=O, and π−π* shake up bonds can be identified and deconvoluted by a symmetrical Gauss function. The contact angle of H2O and CNTs is dependent on O/C ration. The relationships between the fraction of carbon-containing functional groups and various oxygen treatment times are also discussed.

scholarly journals α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 581
Author(s):  
Gajanan S. Ghodake ◽  
Surendra K. Shinde ◽  
Ganesh D. Saratale ◽  
Rijuta G. Saratale ◽  
Min Kim ◽  
...  
Keyword(s):  
Enzyme Immobilization ◽  
Photoelectron Spectroscopy ◽  
Cellulose Fibers ◽  
Relative Activity ◽  
Significant Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Laccase Immobilization ◽  
Surface Modified

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

Effect of Surface Chemistry on Ruthenium Wet Etching

2021 ◽  
Vol 314 ◽  
pp. 302-306
Author(s):  
Quoc Toan Le ◽  
E. Kesters ◽  
M. Doms ◽  
Efrain Altamirano Sánchez
Keyword(s):  
Surface Roughness ◽  
Photoelectron Spectroscopy ◽  
Etching Rate ◽  
Wet Etching ◽  
X Ray ◽  
Force Microscopy ◽  
Metal Free ◽  
Atomic Force ◽  
Different Types ◽  
Effect Of Surface

Different types of ALD Ru films, including as-deposited, annealed Ru, without and with a subsequent CMP step, were used for wet etching study. With respect to the as-deposited Ru, the etching rate of the annealed Ru film in metal-free chemical mixtures (pH = 7-9) was found to decrease substantially. X-ray photoelectron spectroscopy characterization indicated that this behavior could be explained by the presence of the formation of RuOx (x = 2,3) caused by the anneal. A short CMP step applied to the annealed Ru wafer removed the surface RuOx, at least partially, resulting in a significant increase of the etching rate. The change in surface roughness was quantified using atomic force microscopy.

X-Ray Photoelectron Spectroscopy Study of Surface-Modified Silicate Glass

2019 ◽  
Vol 55 (2) ◽  
pp. 180-184
Author(s):  
A. Yu. Teterin ◽  
Yu. A. Teterin ◽  
K. Yu. Maslakov ◽  
E. N. Murav’ev ◽  
V. F. Solinov ◽  
...  
Keyword(s):  
Silicate Glass ◽  
Photoelectron Spectroscopy ◽  
Spectroscopy Study ◽  
X Ray ◽  
Surface Modified

scholarly journals Increased Electrical Conductivity of Carbon Nanotube Fibers by Thermal and Voltage Annealing

2021 ◽  
Vol 8 (1) ◽  
pp. 1
Author(s):  
Varun Shenoy Gangoli ◽  
Chris J. Barnett ◽  
James D. McGettrick ◽  
Alvin Orbaek White ◽  
Andrew R. Barron
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Raman Spectroscopy ◽  
Photoelectron Spectroscopy ◽  
Separate Analysis ◽  
Sweet Spot ◽  
Electrical Conductor ◽  
X Ray ◽  
Resonant Raman ◽  
Carbon Nanotube Fibers

We report the effect of annealing, both electrical and by applied voltage, on the electrical conductivity of fibers spun from carbon nanotubes (CNTs). Commercial CNT fibers were used as part of a larger goal to better understand the factors that go into making a better electrical conductor from CNT fibers. A study of thermal annealing in a vacuum up to 800 °C was performed on smaller fiber sections along with a separate analysis of voltage annealing up to 7 VDC; both exhibited a sweet spot in the process as determined by a combination of a two-point probe measurement with a nanoprobe, resonant Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Scaled-up tests were then performed in order to translate these results into bulk samples inside a tube furnace, with similar results that indicate the potential for an optimized method of achieving a better conductor sample made from CNT fibers. The results also help to determine the surface effects that need to be overcome in order to achieve this.

scholarly journals Effect of synthesis conditions  on  methylene blue adsorption capacity of electrochemically preparated graphene

2020 ◽  
Vol 9 (3) ◽  
pp. 9-14
Author(s):  
Hao Pham Van ◽  
Linh Ha Xuan ◽  
Oanh Phung Thi ◽  
Hong Phan Ngoc ◽  
Huy Nguyen Nhat ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Graphene Nanosheets ◽  
Electrochemical Exfoliation ◽  
X Ray ◽  
Synthesis Conditions ◽  
Mb Adsorption

This report presents the effect of synthesis conditions on the synthesis of graphene nanosheets via electrochemical exfoliation method for adsorbing methylene blue from aqueous solution. Oxygen-containing functional groups and defects in the material were characterized by Raman and X-ray photoelectron spectroscopy (XPS). As a result, by using voltage of 15 V, (NH4)2SO4 (5%, 250 mL) and KOH (7.5%, 250 mL), the obtained material showed the highest MB adsorption capacity due to the high densities of oxygen-containing groups and defects comparison to other conditions.

Sign in / Sign up

Export Citation Format

Share Document