scholarly journals Improving the Performance of a Graphite Foil/Polyaniline Electrode Material by a Thin PEDOT:PSS Layer for Application in Flexible, High Power Supercapacitors

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5791
Author(s):  
Zuzanna Zarach ◽  
Konrad Trzciński ◽  
Marcin Łapiński ◽  
Anna Lisowska-Oleksiak ◽  
Mariusz Szkoda
Keyword(s):  
High Power ◽  
Electrode Material ◽  
Specific Capacity ◽  
Protective Layer ◽  
High Specific Capacitance ◽  
Specific Power ◽  
Potential Range ◽  
Graphite Foil ◽  
Practical Applications ◽  
Symmetric Supercapacitor

In this study, we present a novel strategy for enhancing polyaniline stability and thus obtaining an electrode material with practical application in supercapacitors. A promising (graphite foil/polyaniline/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) GF/PANI/PEDOT:PSS) electrode material was characterized and used in the construction of a symmetric supercapacitor that provides an outstanding high power density. For this purpose, the electropolymerization of PANI was carried out on a graphite foil and then a thin protective layer of PEDOT:PSS was deposited. The presence of the nanometer PEDOT:PSS layer made it possible to widen the electroactivity potential range of the electrode material. Moreover, the synergy between materials positively affected the amount of accumulated charge, and thus the thin PEDOT:PSS layer contributed to enhancing the specific capacity of the electrode material. The electrochemical performance of the GF/PANI/PEDOT:PSS electrode, as well as the symmetrical supercapacitor, was investigated by cyclic voltammetry and galvanostatic charge/discharge cycles in 1 M H2SO4 at room temperature. The fabricated electrode material shows a high specific capacitance (Csp) of 557.4 Fg−1 and areal capacitance (Careal) of 2600 mF·cm−2 in 1 M H2SO4 at a current density of 200 mA·cm−2 (~4 A·g−1). The supercapacitor performance was studied and the results show that a thin PEDOT:PSS layer enables cycling stability improvement of the device from 54% to 67% after 10,000 cycles, and provides a high specific capacity (159.8 F·g−1) and a maximum specific power (18,043 W·kg−1) for practical applications.

scholarly journals Ce-Doped PANI/Fe3O4 Nanocomposites: Electrode Materials for Supercapattery

2021 ◽  
Vol 3 ◽  
Author(s):  
Subash Pandey ◽  
Shova Neupane ◽  
Dipak Kumar Gupta ◽  
Anju Kumari Das ◽  
Nabin Karki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Maximum Energy ◽  
Potential Range ◽  
X Ray Diffraction ◽  
Active Electrode ◽  
Transmission Electron

In this study, we report on a combined approach to preparing an active electrode material for supercapattery application by making nanocomposites of Polyaniline/Cerium (PANI/Ce) with different weight percentages of magnetite (Fe3O4). Fourier-transform infrared spectroscopy (FTIR) and x-ray diffraction (XRD) analyses supported the interaction of PANI with Ce and the formation of the successful nanocomposite with magnetite nanoparticles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses showed the uniform and porous morphology of the composites. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) were used to test the supercapattery behavior of the nanocomposite electrodes in 1.0 M H2SO4. It was found that the supercapattery electrode of PANI/Ce+7 wt.% Fe3O4 exhibited a specific capacity of 171 mAhg−1 in the potential range of −0.2 to 1.0 V at the current density of 2.5 Ag−1. Moreover, PANI/Ce+7 wt.% Fe3O4 revealed a power density of 376.6 Wkg−1 along with a maximum energy density of 25.4 Whkg−1 at 2.5 Ag−1. Further, the cyclic stability of PANI/Ce+7 wt.% Fe3O4 was found to be 96.0% after 5,000 cycles. The obtained results suggested that the PANI/Ce+Fe3O4 nanocomposite could be a promising electrode material candidate for high-performance supercapattery applications.

scholarly journals Highly Stable and Efficient Performance of Binder-Free Symmetric Supercapacitor Fabricated with Electroactive Polymer Synthesized via Interfacial Polymerization

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1626 ◽  
Author(s):  
Muhammad Fahim ◽  
Anwar ul Haq Ali Shah ◽  
Salma Bilal
Keyword(s):  
Power Density ◽  
Electrode Material ◽  
Interfacial Polymerization ◽  
Coulombic Efficiency ◽  
Rate Capability ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Symmetric Supercapacitor ◽  
Binder Free

The use of electroactive polyaniline (PANI) as an electrode material for a symmetric supercapacitor has been reported. The material was synthesized via interfacial polymerization, using ammonium per sulfate, dodecylbenzene sulfonic acid (DBSA), and gasoline, respectively, in the oxidant, dopant, and novel organic phase, and was subsequently employed as an electrode material to design a binder-free symmetric capacitor. As properties of PANI rely on the method of synthesis as well as reaction parameters, the present combination of reactants, at pre-optimized conditions, in the interfacial polymerization, led to the formation of PANI exhibiting a high specific capacitance (712 Fg−1 at 0.5 Ag−1), a good rate capability (86% capacitance retention at 10 Ag−1), a very low solution resistance (Rs = 0.61 Ω), and a potential drop (IR = 0.01917 V). The device exhibited a high energy density of 28 Whkg−1, at a power density of 0.28 kWkg−1, and retained as high as 15.1 Whkg−1, at a high power density of 4.5 kWkg−1. Moreover, it showed an excellent cycling stability and retained 98.5% of coulombic efficiency after 5000 charge discharge cycles, without showing any signs of degradation of polymer.

scholarly journals Electrode material based on multilayer graphene oxide for chemical current sources

2021 ◽  
Vol 21 (4) ◽  
pp. 206-215
Author(s):  
Sergei V. Brudnik ◽  
◽  
Elena V. Yakovleva ◽  
Nikolay V. Gorshkov ◽  
Denis I. Artyukhov ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Current Density ◽  
Electrode Material ◽  
Retention Rate ◽  
Specific Capacity ◽  
Multilayer Graphene ◽  
Oxide Electrode ◽  
High Specific Capacity ◽  
Oxide Cathode ◽  
Symmetric Supercapacitor

The results of the studies of the electrochemical synthesis of multilayer graphene oxide were presented, and the possibility of using it as an electrode material of the supercapacitor was shown. In an alcohol suspension the thickness of the particles of multilayer graphene oxide was less than 0.1 µm with an area of more than 100 µm2. The graphene oxide-based electrode has a high specific capacity of 107 F·g−1 and a high charge retention rate of 97% after 5000 cycles. It was shown that the graphene oxide electrode had a maximum specific energy of 8.7 W·h·kg−1 at the current density of 0.1 A·g−1 and had a maximum power of 2291.1 W·kg−1 at the current density of 4 A·g−1. The application of a lithium-thionyl chloride cell with a multilayer graphene oxide cathode on a nickel grid was tested. It was found that graphene oxide synthesized using the electrochemical method is a promising electrode material for creating a symmetric supercapacitor.

scholarly journals A Cr2O3/MWCNTs composite as a superior electrode material for supercapacitor

RSC Advances ◽  
2017 ◽  
Vol 7 (40) ◽  
pp. 25019-25024 ◽  
Author(s):  
Bingwei Chen ◽  
Yanfang Wang ◽  
Chunyang Li ◽  
Lijun Fu ◽  
Xiang Liu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Practical Applications ◽  
Good Cycling Stability

A Cr2O3/MWCNTs composite exhibited high specific capacitance and good cycling stability a in 1 M KOH aqueous solution. This suggests that Cr2O3 can be promising for practical applications in supercapacitors.

Heterostructured poly(3,6-dithien-2-yl-9H-carbazol-9-yl acetic acid)/TiO2 nanoparticles composite redox-active materials as both anode and cathode for high-performance symmetric supercapacitor applications

2014 ◽  
Vol 2 (18) ◽  
pp. 6512-6524 ◽  
Author(s):  
Deniz Yiğit ◽  
Mustafa Güllü ◽  
Tuğrul Yumak ◽  
Ali Sınağ
Keyword(s):  
Acetic Acid ◽  
High Performance ◽  
High Specific Capacitance ◽  
Cycling Performance ◽  
Specific Power ◽  
Composite Electrodes ◽  
Active Materials ◽  
Redox Active ◽  
Symmetric Supercapacitor ◽  
Supercapacitor Applications

Heterostructured composite electrodes exhibited high specific capacitance, specific power and specific energy, good cycling performance and excellent reversible capability.

scholarly journals Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

2021 ◽  
Author(s):  
Xinyue Li ◽  
Marco Fortunato ◽  
Anna Maria Cardinale ◽  
Angelina Sarapulova ◽  
Christian Njel ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Electrode Material ◽  
Photoelectron Spectroscopy ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Electrochemical Study ◽  
Ex Situ ◽  
Potential Range ◽  
X Ray ◽  
Storage Mechanism

AbstractNickel aluminum layered double hydroxide (NiAl LDH) with nitrate in its interlayer is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the performance of the material is investigated in 1 M LiPF6 in EC/DMC vs. Li. The NiAl LDH electrode based on sodium alginate (SA) binder shows a high initial discharge specific capacity of 2586 mAh g−1 at 0.05 A g−1 and good stability in the potential range of 0.01–3.0 V vs. Li+/Li, which is better than what obtained with a polyvinylidene difluoride (PVDF)-based electrode. The NiAl LDH electrode with SA binder shows, after 400 cycles at 0.5 A g−1, a cycling retention of 42.2% with a capacity of 697 mAh g−1 and at a high current density of 1.0 A g−1 shows a retention of 27.6% with a capacity of 388 mAh g−1 over 1400 cycles. In the same conditions, the PVDF-based electrode retains only 15.6% with a capacity of 182 mAh g−1 and 8.5% with a capacity of 121 mAh g−1, respectively. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. Graphical abstract The as-prepared NiAl-NO3−-LDH with the rhombohedral R-3 m space group is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the material’s performance is investigated in 1 M LiPF6 in EC/DMC vs. Li. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. This work highlights the possibility of the direct application of NiAl LDH materials as negative electrodes for LIBs.

scholarly journals Binary PMMA/PVDF blend film modified substrate enables superior lithium metal anode for lithium batteries

2021 ◽  
Author(s):  
Yuping Wu ◽  
Xiaosong Xiong ◽  
Ruoyu Zhi ◽  
Qi Zhou ◽  
Wenqi Yan ◽  
...  
Keyword(s):  
Electrode Material ◽  
Lithium Batteries ◽  
Specific Capacity ◽  
Lithium Metal ◽  
Next Generation ◽  
Safety Hazards ◽  
Blend Film ◽  
Metal Anode ◽  
Lithium Metal Anode ◽  
Metallic Lithium

Metallic lithium is an promising next generation electrode material due to its ultrahigh specific capacity and the lowest potential. However, short cycling lifespan and safety hazards have hindered the practical...

scholarly journals Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3586
Author(s):  
Qi An ◽  
Xingru Zhao ◽  
Shuangfu Suo ◽  
Yuzhu Bai
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Power Density ◽  
High Power ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
Cycle Life ◽  
High Energy Density ◽  
Lithium Ion Capacitor

Lithium-ion capacitors (LICs) have been widely explored for energy storage. Nevertheless, achieving good energy density, satisfactory power density, and stable cycle life is still challenging. For this study, we fabricated a novel LIC with a NiO-rGO composite as a negative material and commercial activated carbon (AC) as a positive material for energy storage. The NiO-rGO//AC system utilizes NiO nanoparticles uniformly distributed in rGO to achieve a high specific capacity (with a current density of 0.5 A g−1 and a charge capacity of 945.8 mA h g−1) and uses AC to provide a large specific surface area and adjustable pore structure, thereby achieving excellent electrochemical performance. In detail, the NiO-rGO//AC system (with a mass ratio of 1:3) can achieve a high energy density (98.15 W h kg−1), a high power density (10.94 kW kg−1), and a long cycle life (with 72.1% capacity retention after 10,000 cycles). This study outlines a new option for the manufacture of LIC devices that feature both high energy and high power densities.

Sign in / Sign up

Export Citation Format

Share Document