scholarly journals MFC/NFC-Based Foam/Aerogel for Production of Porous Materials: Preparation, Properties and Applications

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5568
Author(s):  
Chenni Qin ◽  
Mingzhu Yao ◽  
Yang Liu ◽  
Yujie Yang ◽  
Yifeng Zong ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Porous Materials ◽  
Raw Materials ◽  
Sewage Treatment ◽  
Nanofibrillated Cellulose ◽  
High Specific Surface Area ◽  
High Porosity ◽  
Retention Performance ◽  
Plant Fibers ◽  
Technical Problems

Nanofibrillated cellulose and microfibrillated cellulose are potential raw materials separated from plant fibers with a high aspect ratio and excellent mechanical properties, which can be applied in various fields (packaging, medicine, etc.). They have unique advantages in the preparation of aerogels and foams, and have attracted widespread attention in recent years. Cellulose-based porous materials have good biodegradability and biocompatibility, while high porosity and high specific surface area endow them with strong mechanical properties and liquid retention performance, which can be used in wall construction, sewage treatment and other fields. At present, the preparation method of this material has been widely reported, however, due to various process problems, the actual production has not been realized. In this paper, we summarize the existing technical problems and main solutions; in the meantime, two stable systems and several drying processes are described, and the application potential of cellulose-based porous materials in the future is described, which provides a reference for subsequent research.

scholarly journals Nanofibrillated Cellulose-Based Aerogels Functionalized with Tajuva (Maclura tinctoria) Heartwood Extract

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 908
Author(s):  
Rodrigo Coldebella ◽  
Marina Gentil ◽  
Camila Berger ◽  
Henrique W. Dalla Costa ◽  
Cristiane Pedrazzi ◽  
...  
Keyword(s):  
Antioxidant Activities ◽  
Three Dimensional ◽  
Nanofibrillated Cellulose ◽  
High Specific Surface Area ◽  
Low Density ◽  
High Porosity ◽  
Porous Networks ◽  
Bonded Particles ◽  
Phenolic Extract ◽  
Cellulosic Pulp

Aerogels are 3-D nanostructures of non-fluid colloidal interconnected porous networks consisting of loosely packed bonded particles that are expanded throughout their volume by gas and exhibit ultra-low density and high specific surface area. Cellulose-based aerogels can be obtained from hydrogels through a drying process, replacing the solvent (water) with air and keeping the pristine three-dimensional arrangement. In this work, hybrid cellulose-based aerogels were produced and their potential for use as dressings was assessed. Nanofibrilated cellulose (NFC) hydrogels were produced by a co-grinding process in a stone micronizer using a kraft cellulosic pulp and a phenolic extract from Maclura tinctoria (Tajuva) heartwood. NFC-based aerogels were produced by freeze followed by lyophilization, in a way that the Tajuva extract acted as a functionalizing agent. The obtained aerogels showed high porosity (ranging from 97% to 99%) and low density (ranging from 0.025 to 0.040 g·cm−3), as well a typical network and sheet-like structure with 100 to 300 μm pores, which yielded compressive strengths ranging from 60 to 340 kPa. The reached antibacterial and antioxidant activities, percentage of inhibitions and water uptakes suggest that the aerogels can be used as fluid absorbers. Additionally, the immobilization of the Tajuva extract indicates the potential for dentistry applications.

scholarly journals The Use of Modal Analysis in Addition Percentage Differentiation, and Mechanical Properties of Ordinary Concretes with the Addition of Fly Ash from Sewage Sludge

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5039
Author(s):  
Gabriela Rutkowska ◽  
Mariusz Żółtowski ◽  
Michał Liss
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Sewage Sludge ◽  
Modal Analysis ◽  
Raw Materials ◽  
Sewage Treatment ◽  
Municipal Sewage ◽  
Municipal Sewage Sludge ◽  
Pilot Studies ◽  
Concrete Mix

Production cost reduction and constraints on natural resources cause the use of waste materials as substitutes of traditional raw materials to become increasingly important. The dynamic development of sewerage systems and sewage treatment plants leads to increases in the produced sewage sludge. According to the Waste Law, municipal sewage sludge can be used if it is properly stabilized. This process results in significant quantities of fly ash that must be utilized. This paper presents investigation results of partial cement replacement influence by the fly ash from sewage sludge on concrete parameters. The results confirm the possibility of fly ash waste applications as a cement substitute in concrete manufacturing. In the later parts of the publication, a pilot study was conducted using the modal analysis methodology and aimed at checking the hypothesis of whether vibration methods can be used in the assessment of the amount of the admixture used in concrete and the effect it has on concrete properties. This is the first time that vibration tests have been used to determine the diversity of the concrete mix composition and to distinguish the percentage of ash added. There are no studies using modal analysis to distinguish the composition of a concrete mix in the scientific literature. The article shows that the vibration test results show the differentiation of concrete composition and can be further improved as a method for determining the composition of mixtures and for distinguishing their mechanical properties. These are only pilot studies, which, in order to develop the target cognitive inference, should be performed in the future on a significantly enlarged number of the studied samples.

Study on the Morphology and Mechanical Properties of Yak Fiber

2012 ◽  
Vol 580 ◽  
pp. 455-460
Author(s):  
Qiu Lan Luo ◽  
Pu Gao ◽  
Dan Deng ◽  
Yuan Xue
Keyword(s):  
Mechanical Properties ◽  
Surface Morphology ◽  
Tensile Properties ◽  
Raw Materials ◽  
High Grade ◽  
Retention Performance ◽  
Warmth Retention ◽  
Very High ◽  
Morphology And Mechanical Properties

As a special animal fiber, yak hair has many excellent properties, such as soft feeling, good elasticity, gentle glossy and excellent warmth retention performance, therefore, it has very high industrial value, and can be used as high-grade raw materials in the woolen industry. In this paper, the fineness, length, curl and surface morphology of Yak fiber were analyzed, and mechanical and tensile properties with the different conditions were discussed and compared.

The Sintering Behaviour and Mechanical Properties of Hydroxyapatite - Based Composites for Bone Tissue Regeneration

2018 ◽  
Vol 69 (5) ◽  
pp. 1272-1275 ◽  
Author(s):  
Camelia Tecu ◽  
Aurora Antoniac ◽  
Gultekin Goller ◽  
Mustafa Guven Gok ◽  
Marius Manole ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tricalcium Phosphate ◽  
Cosmetic Surgery ◽  
Mechanical Stability ◽  
Raw Materials ◽  
Oyster Shell ◽  
Bone Tissue Regeneration ◽  
Sintering Behavior ◽  
Bovine Bone ◽  
Human Teeth

Bone reconstruction is a complex process which involves an osteoconductive matrix, osteoinductive signaling, osteogenic cells, vascularization and mechanical stability. Lately, to improve the healing of the bone defects and to accelerate the bone fusion and bone augmentation, bioceramic composite materials have been used as bone substitutes in the field of orthopedics and dentistry, as well as in cosmetic surgery. Of all types of bioceramics, the most used is hydroxyapatite, because of its similar properties to those of the human bone and better mechanical properties compared to b-tricalcium phosphate [1]. Currently, the most used raw materials sources for obtaining the hydroxyapatite are: bovine bone, seashells, corals, oyster shell, eggshells and human teeth. There are two common ways to obtain hydroxyapatite: synthetically and naturally. Generally, for the improvement of the mechanical properties and the structural one, hydroxyapatite is subjected to the sintering process. Considering the disadvantages of hydroxyapatite such as poor biodegradation rate, b-TCP has been developed, which has some disadvantages too, such as brittleness. For this reason, the aim of this study is to look into the effect of adding magnesium oxide on the sintering behavior, the structure and the mechanical properties of the hydroxyapatite-tricalcium phosphate composites.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

scholarly journals Fabrication of Hybrid Nanofibers from Biopolymers and Poly (Vinyl Alcohol)/Poly (ε-Caprolactone) for Wound Dressing Applications

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2104
Author(s):  
Sibusiso Alven ◽  
Blessing Atim Aderibigbe
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Vinyl Alcohol ◽  
Wound Dressing ◽  
Chronic Wounds ◽  
Cellular Adhesion ◽  
Wound Dressings ◽  
Poly Vinyl Alcohol ◽  
High Porosity ◽  
Hybrid Nanofibers

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing process. Based on the above-mentioned outstanding properties of nanofibers and the unique properties of hybrid wound dressings prepared from poly (vinyl alcohol) and poly (ε-caprolactone), this review reports the in vitro and in vivo outcomes of the reported hybrid nanofibers.

scholarly journals Influence of biological origin on the tensile properties of cellulose nanopapers

Cellulose ◽  
2021 ◽  
Author(s):  
Katri S. Kontturi ◽  
Koon-Yang Lee ◽  
Mitchell P. Jones ◽  
William W. Sampson ◽  
Alexander Bismarck ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Cell Wall ◽  
Bacterial Cellulose ◽  
Raw Materials ◽  
Cellulose Nanofibers ◽  
Nanofibrillated Cellulose ◽  
Primary Cell Wall ◽  
Biological Origin ◽  
Basic Principles ◽  
Fiber Mats

Abstract Cellulose nanopapers provide diverse, strong and lightweight templates prepared entirely from sustainable raw materials, cellulose nanofibers (CNFs). Yet the strength of CNFs has not been fully capitalized in the resulting nanopapers and the relative influence of CNF strength, their bonding, and biological origin to nanopaper strength are unknown. Here, we show that basic principles from paper physics can be applied to CNF nanopapers to illuminate those relationships. Importantly, it appeared that ~ 200 MPa was the theoretical maximum for nanopapers with random fibril orientation. Furthermore, we demonstrate the contrast in tensile strength for nanopapers prepared from bacterial cellulose (BC) and wood-based nanofibrillated cellulose (NFC). Endemic amorphous polysaccharides (hemicelluloses) in NFC act as matrix in NFC nanopapers, strengthening the bonding between CNFs just like it improves the bonding between CNFs in the primary cell wall of plants. The conclusions apply to all composites containing non-woven fiber mats as reinforcement. Graphic abstract

scholarly journals Analysis of PLA Composite Filaments Reinforced with Lignin and Polymerised-Lignin-Treated NFC

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2174
Author(s):  
Diana Gregor-Svetec ◽  
Mirjam Leskovšek ◽  
Blaž Leskovar ◽  
Urška Stanković Elesini ◽  
Urška Vrabič-Brodnjak
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Glassy State ◽  
Nanofibrillated Cellulose ◽  
Dynamic Mechanical Properties ◽  
Initial Modulus ◽  
Surface Modified ◽  
Scanning Electron

Polylactic acid (PLA) is one of the most suitable materials for 3D printing. Blending with nanoparticles improves some of its properties, broadening its application possibilities. The article presents a study of composite PLA matrix filaments with added unmodified and lignin/polymerised lignin surface-modified nanofibrillated cellulose (NFC). The influence of untreated and surface-modified NFC on morphological, mechanical, technological, infrared spectroscopic, and dynamic mechanical properties was evaluated for different groups of samples. As determined by the stereo and scanning electron microscopy, the unmodified and surface-modified NFCs with lignin and polymerised lignin were present in the form of plate-shaped agglomerates. The addition of NFC slightly reduced the filaments’ tensile strength, stretchability, and ability to absorb energy, while in contrast, the initial modulus slightly improved. By adding NFC to the PLA matrix, the bending storage modulus (E’) decreased slightly at lower temperatures, especially in the PLA samples with 3 wt% and 5 wt% NFC. When NFC was modified with lignin and polymerised lignin, an increase in E’ was noticed, especially in the glassy state.

Preparation and characterization of electrospun cellulose acetate sub-micro fibrous membranes

2021 ◽  
pp. 004051752110117
Author(s):  
Zhenzhen Quan ◽  
Yihan Wang ◽  
Jiajun Wu ◽  
Xiaohong Qin ◽  
Jianyong Yu
Keyword(s):  
Cellulose Acetate ◽  
High Specific Surface Area ◽  
Proper Solution ◽  
High Porosity ◽  
Hydrolysis Time ◽  
Research Fields ◽  
Average Porosity ◽  
Fibrous Membranes ◽  
Microfiber Membrane ◽  
Solution Parameters

Electrospun sub-microfiber membrane of cellulose acetate (CA), with excellent biodegradability, high specific surface area and high porosity, has attracted wide attention in various research fields. Even so, the stable continuous electrospinning of CA sub-micro fibers is affected by the solution parameters and CA acetylation degree dramatically, which still remains challenging. In the present work, electrospun CA sub-micro fibrous membranes have been prepared from four distinct solvent systems, respectively, to explore the proper solution parameters for membrane fabrication. After hydrolysis and electrospinning, the produced CA sub-micro fibrous membranes were analyzed in terms of fiber size distribution, hydrophilicity and porosity. Current analysis has shown that the degree of substitution of CA sub-micro fibers decreases with the increase in hydrolysis time, resulting in increased diameter irregularity, decreased average porosity and increased hydrophilicity of the sub-micro fibrous membrane.

Sign in / Sign up

Export Citation Format

Share Document