scholarly journals Facile Synthesis of g-C3N4/TiO2/Hectorite Z-Scheme Composite and Its Visible Photocatalytic Degradation of Rhodamine B

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5304
Author(s):  
Rong You ◽  
Jinyang Chen ◽  
Menghan Hong ◽  
Jinrui Li ◽  
Xiaomin Hong
Keyword(s):  
Rhodamine B ◽  
Degradation Rate ◽  
Apparent Rate Constant ◽  
Solid Phase ◽  
Catalytic Efficiency ◽  
High Specific Surface Area ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
Facile Synthesis ◽  
Effective Separation

A novel g-C3N4/TiO2/hectorite Z-scheme composites with oxygen vacancy (Vo) defects and Ti3+ were synthesized by so-gel method and high temperature solid phase reaction. This composite exhibited high visible photo-catalytic degradation of rhodamine B (RhB). The apparent rate constant of g-C3N4/TiO2/hectorite was 0.01705 min−1, which is approximately 5.38 and 4.88 times that of P25 and g-C3N4, respectively. The enhancement of photo-catalytic efficiency of the composites can be attributed to the great light harvesting ability, high specific surface area and effective separation of electrons(e−) and holes(h+). The F element from Hectorite causes the formation of Vo and Ti3+ in TiO2, making it responsive to visible light. The effective separation of e− and h+ mainly results from Z-scheme transfer of photo-produced electrons in g-C3N4/TiO2 interface. The composites can be easily recycled and the degradation rate of the RhB still reached 84% after five cycles, indicating its good reusability.

Facile synthesis and electrochemical properties of MoS2 nanostructures with different lithium storage properties

RSC Advances ◽  
2015 ◽  
Vol 5 (60) ◽  
pp. 48492-48499 ◽  
Author(s):  
Jing Xu ◽  
Hua Tang ◽  
Yanqiu Chu ◽  
Changsheng Li
Keyword(s):  
Electrochemical Properties ◽  
Solid Phase ◽  
Reaction Process ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
Facile Synthesis ◽  
Lithium Storage ◽  
3D Microspheres ◽  
Storage Properties

MoS2 nanomaterials with different morphologies such as nanoplates, nanowalls, and 3D microspheres composed of ultrathin nanoflakes were synthesized via a simple solid-phase reaction process.

scholarly journals Fe3O4@C Nanoparticles Synthesized by In Situ Solid-Phase Method for Removal of Methylene Blue

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 330
Author(s):  
Hengli Xiang ◽  
Genkuan Ren ◽  
Yanjun Zhong ◽  
Dehua Xu ◽  
Zhiye Zhang ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Solid Phase ◽  
Raw Materials ◽  
Phase Method ◽  
Maximum Adsorption Capacity ◽  
High Catalytic Activity ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
High Concentrations

Fe3O4@C nanoparticles were prepared by an in situ, solid-phase reaction, without any precursor, using FeSO4, FeS2, and PVP K30 as raw materials. The nanoparticles were utilized to decolorize high concentrations methylene blue (MB). The results indicated that the maximum adsorption capacity of the Fe3O4@C nanoparticles was 18.52 mg/g, and that the adsorption process was exothermic. Additionally, by employing H2O2 as the initiator of a Fenton-like reaction, the removal efficiency of 100 mg/L MB reached ~99% with Fe3O4@C nanoparticles, while that of MB was only ~34% using pure Fe3O4 nanoparticles. The mechanism of H2O2 activated on the Fe3O4@C nanoparticles and the possible degradation pathways of MB are discussed. The Fe3O4@C nanoparticles retained high catalytic activity after five usage cycles. This work describes a facile method for producing Fe3O4@C nanoparticles with excellent catalytic reactivity, and therefore, represents a promising approach for the industrial production of Fe3O4@C nanoparticles for the treatment of high concentrations of dyes in wastewater.

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

2016 ◽  
Vol 697 ◽  
pp. 510-514 ◽  
Author(s):  
Feng Rui Zhai ◽  
Ke Shan ◽  
Ruo Meng Xu ◽  
Min Lu ◽  
Zhong Zhou Yi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Relative Density ◽  
Fracture Strength ◽  
Solid Phase ◽  
Raw Materials ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
Microstructure And Mechanical Properties ◽  
Multiphase Ceramics ◽  
Strength And Toughness

In the present paper, the ZrB2/h-BN multiphase ceramics were fabricated by SPS (spark plasma sintering) technology at lower sintering temperature using h-BN, ZrO2, AlN and Si as raw materials and B2O3 as a sintering aid. The phase constitution and microstructure of specimens were analyzed by XRD and SEM. Moreover, the effects of different sintering pressures on the densification, microstructure and mechanical properties of ZrB2/h-BN multiphase ceramics were also systematically investigated. The results show that the ZrB2 was obtained through solid phase reaction at different sintering pressures, and increasing sintering pressure could accelerate the formation of ZrB2 phase. As the sintering pressure increasing, the fracture strength and toughness of the sintered samples had a similar increasing tendency as the relative density. The better comprehensive properties were obtained at given sintering pressure of 50MPa, and the relative density, fracture strength and toughness reached about 93.4%, 321MPa and 3.3MPa·m1/2, respectively. The SEM analysis shows that the h-BN grains were fine and uniform, and the effect of sintering pressure on grain size was inconspicuous. The distribution of grain is random cross array, and the fracture texture was more obvious with the increase of sintering pressure. The fracture mode of sintered samples remained intergranular fracture mechanism as sintering pressure changed, and the grain refinement, grain pullout and crack deflection helped to increase the mechanical properties.

Study of solid-phase reaction between CsNO3 AND V2O5 in the molar ratio 6:5

1980 ◽  
Vol 18 (3) ◽  
pp. 469-476 ◽  
Author(s):  
Ľ. Žúrková ◽  
K. Gáplovská ◽  
V. Suchá
Keyword(s):  
Solid Phase ◽  
Molar Ratio ◽  
Solid Phase Reaction ◽  
Phase Reaction

X-Ray and Magnetic Measurements of TmFeTi2O7

2014 ◽  
Vol 215 ◽  
pp. 470-473 ◽  
Author(s):  
Tamara V. Drokina ◽  
German A. Petrakovskii ◽  
Dmitrii A. Velikanov ◽  
Maksim S. Molokeev
Keyword(s):  
Spin Glass ◽  
Solid Phase ◽  
Magnetic Measurements ◽  
Diffraction Method ◽  
Freezing Temperature ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
History Of

In this paper we are reported about a peculiarity of the crystal structure and the magnetic state of TmFeTi2O7. The compound TmFeTi2O7 has been synthesizedusing the solid-phase reaction method. Using X-ray diffraction method the disorder in the distribution of the iron ions over five nonequivalent crystal sites was observed, also the populations of the iron atoms positions were determined. We show that below Tf = 6 K the magnetization of TmFeTi2O7 depends on the magnetic history of the sample. There are indications for spin glass state. This results allow us to assume the state of spin glass is realized below freezing temperature Tf = 6 K in TmFeTi2O7.

Sign in / Sign up

Export Citation Format

Share Document