scholarly journals Experimental Study on Corrosion Performance of Oil Tubing Steel in HPHT Flowing Media Containing O2 and CO2

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5214
Author(s):  
Yihua Dou ◽  
Zhen Li ◽  
Jiarui Cheng ◽  
Yafei Zhang
Keyword(s):  
High Temperature ◽  
Corrosion Product ◽  
Corrosion Process ◽  
Co2 Corrosion ◽  
Corrosion Mechanism ◽  
Construction Work ◽  
Gas Concentration ◽  
Flow Experiment ◽  
Corrosive Environments ◽  
Reaction Processes

The high pressure and high temperature (HPHT) flow solution containing various gases and Cl− ions is one of the corrosive environments in the use of oilfield tubing and casing. The changing external environment and complex reaction processes are the main factors restricting research into this type of corrosion. To study the corrosion mechanism in the coexistence of O2 and CO2 in a flowing medium, a HPHT flow experiment was used to simulate the corrosion process of N80 steel in a complex downhole environment. After the test, the material corrosion rate, surface morphology, micromorphology, and corrosion product composition were tested. Results showed that corrosion of tubing material in a coexisting environment was significantly affected by temperature and gas concentration. The addition of O2 changes the structure of the original CO2 corrosion product and the corrosion process, thereby affecting the corrosion law, especially at high temperatures. Meanwhile, the flowing boundary layer and temperature changed the gas concentration near the wall, which changed the corrosion priority and intermediate products on the metal surface. These high temperature corrosion conclusions can provide references for the anticorrosion construction work of downhole pipe strings.

Wear Resistance of CO2 Corrosion Product Scale Formed at High Temperature

2006 ◽  
Vol 13 (5) ◽  
pp. 47-52 ◽  
Author(s):  
Guan-fa Lin ◽  
Mao-sheng Zheng ◽  
Zhen-quan Bai ◽  
Yao-rong Feng
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Corrosion Product ◽  
Co2 Corrosion

Application of TEM to Deformation, Wear, and Fracture of Ceramics

1974 ◽  
Vol 32 ◽  
pp. 472-473
Author(s):  
B. J. Hockey
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Mechanical Behavior ◽  
Brittle Materials ◽  
High Temperature Strength ◽  
Wide Range ◽  
Corrosive Environments ◽  
Further Development

Ceramics, such as Al2O3 and SiC have numerous current and potential uses in applications where high temperature strength, hardness, and wear resistance are required often in corrosive environments. These materials are, however, highly anisotropic and brittle, so that their mechanical behavior is often unpredictable. The further development of these materials will require a better understanding of the basic mechanisms controlling deformation, wear, and fracture.The purpose of this talk is to describe applications of TEM to the study of the deformation, wear, and fracture of Al2O3. Similar studies are currently being conducted on SiC and the techniques involved should be applicable to a wide range of hard, brittle materials.

Spectral Analysis Of CO2 Corrosion Product Scales On 13Cr Tubing Steel

2009 ◽  
Author(s):  
Guanfa Lin ◽  
Yaorong Feng ◽  
Zhenquan Bai ◽  
Jianmin Xiang
Keyword(s):  
Spectral Analysis ◽  
Corrosion Product ◽  
Co2 Corrosion

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

scholarly journals Effect of Oxide Scale Microstructure on Atmospheric Corrosion Behavior of Hot Rolled Steel Strip

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 517
Author(s):  
Bin Sun ◽  
Lei Cheng ◽  
Chong-Yang Du ◽  
Jing-Ke Zhang ◽  
Yong-Quan He ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Oxide Scale ◽  
Corrosion Product ◽  
Corrosion Behavior ◽  
Corrosion Test ◽  
Atmospheric Corrosion ◽  
Corrosion Mechanism ◽  
Type I ◽  
Rust Layer ◽  
Hot Rolled

The atmospheric corrosion behavior of a hot-rolled strip with four types (I–IV) of oxide scale was investigated using the accelerated wet–dry cycle corrosion test. Corrosion resistance and porosity of oxide scale were studied by potentiometric polarization measurements. Characterization of samples after 80 cycles of the wet–dry corrosion test showed that scale comprised wüstite and magnetite had strongest corrosion resistance. Oxide scale composed of inner magnetite/iron (>70%) and an outer magnetite layer had the weakest corrosion resistance. The corrosion kinetics (weight gain) of each type of oxide scale followed an initial linear and then parabolic (at middle to late corrosion) relationship. This could be predicted by a simple kinetic model which showed good agreement with the experimental results. Analysis of the potentiometric polarization curves, obtained from oxide coated steel electrodes, revealed that the type I oxide scale had the highest porosity, and the corrosion mechanism resulted from the joint effects of electrochemical behavior and the porosity of the oxide scale. In the initial stage of corrosion, the corrosion product nucleated and an outer rust layer formed. As the thickness of outer rust layer increased, the corrosion product developed on the scale defects. An inner rust layer then formed in the localized pits as crack growth of the scale. This attacked the scale and expanded into the substrate during the later stage of corrosion. At this stage, the protective effect of the oxide scale was lost.

Effect of CO2 on Anti-Corrosion Property of a Polyurea Coating Modified with Organosilicone

2014 ◽  
Vol 789 ◽  
pp. 466-470
Author(s):  
Qing Hao Shi ◽  
Bing Ying Wang ◽  
Bin Zhao
Keyword(s):  
High Temperature ◽  
Partial Pressure ◽  
Composite Coating ◽  
Corrosion Test ◽  
Electrochemical Impedance ◽  
Failure Process ◽  
Corrosion Property ◽  
Corrosion Mechanism ◽  
Partial Pressures ◽  
High Temperature High Pressure

The corrosion mechanism of organic silicon modified polyurea composite coating under different CO2 partial pressures was studied using high-temperature autoclave, combined with scanning electron microscopy (SEM), adhesion tests and electrochemical impedance spectroscopy (EIS) technology. The experimental results showed that: there was no corrosion product formed on the surface of coating sample after high-temperature high-pressure corrosion test, and with the increasing of CO2 partial pressure, the coating adhesion and impedance values decline increases. Moreover CO2 partial pressure increases accelerated the failure process of polyurea composite coating system.

Sign in / Sign up

Export Citation Format

Share Document