scholarly journals A Novel Bioactive Glass Containing Therapeutic Ions with Enhanced Biocompatibility

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4600 ◽  
Author(s):  
Rachele Sergi ◽  
Devis Bellucci ◽  
Roberta Salvatori ◽  
Alexandre Anesi ◽  
Valeria Cannillo
Keyword(s):  
Bioactive Glass ◽  
Dissolution Rate ◽  
Crystallization Temperature ◽  
Biological Properties ◽  
Thermal Treatments ◽  
Cellular Viability ◽  
In Vitro Bioactivity ◽  
High Crystallization ◽  
High Crystallization Temperature

A novel bioactive glass containing therapeutic ions with enhanced biocompatibility was designed and produced by the classical melt-quenching route. Starting from a very promising composition (Bio_MS), which combined bioactivity and high crystallization temperature, the ratio between some oxides was tailored to obtain a new and more reactive (in terms of dissolution rate) bioactive glass, called BGMSN (composition in mol%: 6.1 Na2O, 31.3 CaO, 5 MgO, 10 SrO, 2.6 P2O5, 45 SiO2). The aim of this work was to produce a bioactive glass with a good biological performance, preserving, at the same time, the high crystallization temperature achieved for Bio_MS; this is strategic in order to avoid undesired crystalline phases during thermal treatments, which can undermine the bioactivity and even the stability of final products. A complete characterization of the novel bioactive glass was performed in terms of thermal, mechanical and biological properties and in vitro bioactivity. The thermal behavior of the bioactive glass was studied by heating microscopy, differential thermal analysis (DTA) and optical dilatometry; BGMSN showed a very high crystallization temperature and a high sinterability parameter, thus being suitable for applications where thermal treatments are required, such as sintered samples, coatings and scaffolds. Mechanical properties were investigated by the micro-indentation technique. The in vitro biological properties were evaluated by means of both direct and indirect cell tests, i.e., neutral red (NR) uptake and MTT assay, using murine long bone osteocyte Y4 (MLO-Y4) cells: the cellular viability of BGMSN was higher compared to cellular viability of 45S5, both in direct and indirect tests. Finally, the in vitro bioactivity test by soaking samples in simulated body fluid (SBF) showed high dissolution rate, with a good rate of formation of hydroxyapatite.

scholarly journals Synthesis and Characterization of Silver–Strontium (Ag-Sr)-Doped Mesoporous Bioactive Glass Nanoparticles

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 34
Author(s):  
Shaher Bano ◽  
Memoona Akhtar ◽  
Muhammad Yasir ◽  
Muhammad Salman Maqbool ◽  
Akbar Niaz ◽  
...  
Keyword(s):  
Bioactive Glass ◽  
Composite Coatings ◽  
Antibacterial Properties ◽  
Bone Diseases ◽  
Osteogenic Potential ◽  
Diffusion Method ◽  
Charge Composition ◽  
In Vitro Bioactivity ◽  
Mesoporous Bioactive Glass

Biomedical implants are the need of this era due to the increase in number of accidents and follow-up surgeries. Different types of bone diseases such as osteoarthritis, osteomalacia, bone cancer, etc., are increasing globally. Mesoporous bioactive glass nanoparticles (MBGNs) are used in biomedical devices due to their osteointegration and bioactive properties. In this study, silver (Ag)- and strontium (Sr)-doped mesoporous bioactive glass nanoparticles (Ag-Sr MBGNs) were prepared by a modified Stöber process. In this method, Ag+ and Sr2+ were co-substituted in pure MBGNs to harvest the antibacterial properties of Ag ions, as well as pro-osteogenic potential of Sr2 ions. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and in-vitro bioactivity was studied. Scanning electron microscopy (SEM), X-Ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) confirmed the doping of Sr and Ag in MBGNs. SEM and EDX analysis confirmed the spherical morphology and typical composition of MBGNs, respectively. The Ag-Sr MBGNs showed a strong antibacterial effect against Staphylococcus carnosus and Escherichia coli bacteria determined via turbidity and disc diffusion method. Moreover, the synthesized Ag-Sr MBGNs develop apatite-like crystals upon immersion in simulated body fluid (SBF), which suggested that the addition of Sr improved in vitro bioactivity. The Ag-Sr MBGNs synthesized in this study can be used for the preparation of scaffolds or as a filler material in the composite coatings for bone tissue engineering.

scholarly journals Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 618
Author(s):  
Tzu-Yu Peng ◽  
Pei-Yun Tsai ◽  
May-Show Chen ◽  
Yuichi Mine ◽  
Shan-Hua Wu ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Polyethylene Glycol ◽  
Bioactive Glass ◽  
Spray Pyrolysis ◽  
Mesoporous Structure ◽  
High Specific Surface Area ◽  
Process Time ◽  
In Vitro Bioactivity ◽  
One Pot

Mesoporous bioactive glass (MBG) has a high specific surface area, promoting the reaction area, thereby improving the bioactivity; thus, MBG is currently gaining popularity in the biomaterial field. Spray pyrolysis (SP) is a one-pot process that has the advantages of shorter process time and better particle bioactivity, therefore, MBG was prepared by SP process with various polyethylene glycol (PEG, molecular weight ranged from 2000–12,000) and acid (HCl and CH3COOH) additions. In vitro bioactivity and mesoporous properties of the so-obtained MBG were investigated. The experimental results showed that all the MBG exhibited amorphous and mesoporous structure. Increasing the molecular weight of PEG can improve the mesoporous structure and bioactivity of MBG. Whereas optimized MBG was prepared with suitable concentration of PEG and CH3COOH. In the present work, MBG synthesized via spray pyrolysis by adding 5 g of PEG with a molecular weight of 12,000 and 50 mL of CH3COOH exhibited the best in vitro bioactivity and mesoporous structure.

Thermal analysis and in vitro bioactivity of bioactive glass–alumina composites

2011 ◽  
Vol 62 (1) ◽  
pp. 118-129 ◽  
Author(s):  
Xanthippi Chatzistavrou ◽  
Nikolaos Kantiranis ◽  
Eleana Kontonasaki ◽  
Konstantinos Chrissafis ◽  
Labrini Papadopoulou ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Bioactive Glass ◽  
In Vitro Bioactivity ◽  
Alumina Composites

Phase composition and in vitro bioactivity of porous implants made of bioactive glass S53P4

2012 ◽  
Vol 8 (6) ◽  
pp. 2331-2339 ◽  
Author(s):  
S. Fagerlund ◽  
J. Massera ◽  
N. Moritz ◽  
L. Hupa ◽  
M. Hupa
Keyword(s):  
Phase Composition ◽  
Bioactive Glass ◽  
In Vitro Bioactivity

scholarly journals A New Generation of Electrospun Fibers Containing Bioactive Glass Particles for Wound Healing

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5651
Author(s):  
Rachele Sergi ◽  
Valeria Cannillo ◽  
Aldo R. Boccaccini ◽  
Liliana Liverani
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Bioactive Glass ◽  
Flexible Structures ◽  
Biological Properties ◽  
Cellular Viability ◽  
Bioactive Glasses ◽  
Electrospinning Technique ◽  
Potential Applications ◽  
Biological Performance

Chitosan fibers blended with polyethylene oxide (CHIT_PEO) and crosslinked with genipin were fabricated by electrospinning technique. Subsequently, CHIT_PEO bioactive glass composite electrospun mats were fabricated with the aim to achieve flexible structures with adequate mechanical properties and improved biological performance respect to CHIT_PEO fibers, for potential applications in wound healing. Three different compositions of bioactive glasses (BG) were selected and investigated: 45S5 BG, a Sr and Mg containing bioactive glass (BGMS10) and a Zn-containing bioactive glass (BGMS_2Zn). Particulate BGs (particles size < 20 μm) were separately added to the starting CHIT_PEO solution before electrospinning. The two recently developed bioactive glasses (BGMS10 and BGMS_2Zn) showed very promising biological properties in terms of bioactivity and cellular viability; thus, such compositions were added for the first time to CHIT_PEO solution to fabricate composite electrospun mats. The incorporation of bioactive glass particles and their distribution into CHIT_PEO fibers were assessed by SEM and FTIR analyses. Furthermore, CHIT_PEO composite electrospun mats showed improved mechanical properties in terms of Young’s Modulus compared to neat CHIT_PEO fibers; on the contrary, the values of tensile strain at break (%) were comparable. Biological performance in terms of cellular viability was investigated by means of WST-8 assay and CHIT_PEO composite electrospun mats showed cytocompatibility and the desired cellular viability.

Sign in / Sign up

Export Citation Format

Share Document