scholarly journals The Study on the Whole Stress–Strain Curves of Coral Fly Ash-Slag Alkali-Activated Concrete under Uniaxial Compression

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4291
Author(s):  
Huailiang Wang ◽  
Lang Wang ◽  
Lei Li ◽  
Baoquan Cheng ◽  
Yonggang Zhang ◽  
...  
Keyword(s):  
Fly Ash ◽  
Uniaxial Compression ◽  
Peak Stress ◽  
Constitutive Relationship ◽  
Lightweight Aggregate Concrete ◽  
Loading Test ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Alkali Activated Concrete ◽  
Alkali Activated

This study aimed to research the whole stress–strain curves of coral Fly Ash-Slag Alkali-Activated Concrete (CAAC) in different strength grades. Fly ash-slag alkali-activated concrete was used as cementing materials to produce coral aggregate concrete. A monotonic loading test was conducted on the prismatic specimens to obtain elastic modulus (Ec), Poisson’s ratio (μ) and the constitutive relationship of CAAC under uniaxial compression. When the strain of CAAC reached the maximum value, the specimen was split and damaged rapidly. As the strength grade increased, the ratio of residual stress (σri) to peak stress (σ0i) decreased in the range of 0.17–0.28. The Ec of CAAC increased gradually, and μ increased to the peak value and then decreased. According to the test results, the constitutive equation of CAAC can be expressed by piecewise expression, which can better reflect all the experimental characteristics. It was also found that CAAC has many similar characteristics with coral concrete and lightweight aggregate concrete. To improve the strength and toughness of CAAC, some fibers, such as organic fiber, can be added to expand the application of CAAC in engineering projects.

scholarly journals Failure Criteria and Constitutive Relationship of Lightweight Aggregate Concrete under Triaxial Compression

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 507
Author(s):  
Peihuan Ye ◽  
Yuliang Chen ◽  
Zongping Chen ◽  
Jinjun Xu ◽  
Huiqin Wu
Keyword(s):  
Triaxial Compression ◽  
Lightweight Aggregate ◽  
Confining Pressure ◽  
Failure Criteria ◽  
Constitutive Relationship ◽  
Lightweight Aggregate Concrete ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Stress Theory ◽  
Relationship Of

This paper investigates the compression behavior and failure criteria of lightweight aggregate concrete (LAC) under triaxial loading. A total of 156 specimens were tested for three parameters: concrete strength, lateral confining pressure and aggregate immersion time, and their effects on the failure mode of LAC and the triaxial stress-strain relationship of LAC is studied. The research indicated that, as the lateral constraint of the specimen increases, the failure patterns change from vertical splitting failure to oblique shearing failure and then to indistinct traces of damage. The stress-strain curve of LAC specimens has an obvious stress plateau, and the curve no longer appears downward when the confining pressure exceeds 12 MPa. According to the experimental phenomenon and test data, the failure criterion was examined on the Mohr–Coulomb theory, octahedral shear stress theory and Rendulic plane stress theory, which well reflects the behavior of LAC under triaxial compression. For the convenience of analysis and application, the stress-strain constitutive models of LAC under triaxial compression are recommended, and these models correlate well with the test results.

scholarly journals Axial Stress-Strain Performance of Recycled Aggregate Concrete Reinforced with Macro-Polypropylene Fibres

2021 ◽  
Vol 13 (10) ◽  
pp. 5741
Author(s):  
Muhammad Junaid Munir ◽  
Syed Minhaj Saleem Kazmi ◽  
Yu-Fei Wu ◽  
Xiaoshan Lin ◽  
Muhammad Riaz Ahmad
Keyword(s):  
Axial Stress ◽  
Peak Stress ◽  
Polypropylene Fibre ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Peak Strain ◽  
Stress Strain ◽  
Polypropylene Fibres ◽  
Aggregate Concrete

The addition of macro-polypropylene fibres improves the stress-strain performance of natural aggregate concrete (NAC). However, limited studies focus on the stress-strain performance of macro-polypropylene fibre-reinforced recycled aggregate concrete (RAC). Considering the variability of coarse recycled aggregates (CRA), more studies are needed to investigate the stress-strain performance of macro-polypropylene fibre-reinforced RAC. In this study, a new type of 48 mm long BarChip macro-polypropylene fibre with a continuously embossed surface texture is used to produce BarChip fibre-reinforced NAC (BFNAC) and RAC (BFRAC). The stress-strain performance of BFNAC and BFRAC is studied for varying dosages of BarChip fibres. Results show that the increase in energy dissipation capacity (i.e., area under the curve), peak stress, and peak strain of samples is observed with an increase in fibre dosage, indicating the positive effect of fibre addition on the stress-strain performance of concrete. The strength enhancement due to the addition of fibres is higher for BFRAC samples than BFNAC samples. The reduction in peak stress, ultimate strain, toughness and specific toughness of concrete samples due to the utilisation of CRA also reduces with the addition of fibres. Hence, the negative effect of CRA on the properties of concrete samples can be minimised by adding BarChip macro-polypropylene fibres. The applicability of the stress-strain model previously developed for macro-synthetic and steel fibre-reinforced NAC and RAC to BFNAC and BFRAC is also examined.

Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash

2016 ◽  
Vol 135 ◽  
pp. 148-157 ◽  
Author(s):  
Payam Shafigh ◽  
Mohammad A. Nomeli ◽  
U. Johnson Alengaram ◽  
Hilmi Bin Mahmud ◽  
Mohd Zamin Jumaat
Keyword(s):  
Fly Ash ◽  
Lightweight Aggregate ◽  
High Volume ◽  
Limestone Powder ◽  
Engineering Properties ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
High Volume Fly Ash

Life cycle assessment and cost analysis of fly ash–rice husk ash blended alkali-activated concrete

2021 ◽  
Vol 295 ◽  
pp. 113140
Author(s):  
Sarah Fernando ◽  
Chamila Gunasekara ◽  
David W. Law ◽  
M.C.M. Nasvi ◽  
Sujeeva Setunge ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Fly Ash ◽  
Cost Analysis ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Alkali Activated Concrete ◽  
Alkali Activated

scholarly journals Alkali-activated concrete with Serbian fly ash and its radiological impact

2017 ◽  
Vol 168 ◽  
pp. 30-37 ◽  
Author(s):  
Cristina Nuccetelli ◽  
Rosabianca Trevisi ◽  
Ivan Ignjatović ◽  
Jelena Dragaš
Keyword(s):  
Fly Ash ◽  
Radiological Impact ◽  
Alkali Activated Concrete ◽  
Alkali Activated

scholarly journals Alkali-Activated Slag/ Fly Ash Concrete: Mechanism, Properties, Hydration Product and Curing Temperature

2020 ◽  
Vol 9 (9) ◽  
pp. 204-215
Keyword(s):  
Fly Ash ◽  
Hydration Product ◽  
Test Methods ◽  
Curing Temperature ◽  
Environmental Friendliness ◽  
Alkali Activated Slag ◽  
Fly Ash Concrete ◽  
Activated Slag ◽  
Alkali Activated Concrete ◽  
Alkali Activated

Alkali-activated concrete (AAC) is mounting as a feasible alternative to OPC assimilated to reduce greenhouse gas emanated during the production of OPC. Use of pozzolana results in gel over-strengthening and fabricate less quantity of Ca(OH)2 which provide confrontation to concrete against hostile environment. (AAC) is potential due to inheriting the property of disbursing CO2 instantly from the composition. Contrastingly an option to ordinary Portland cement (OPC), keeping this fact in mind the goal to evacuate CO2 emits and beneficiate industrial by-products into building material have been taken into consideration. Production of alkali-activated cement emanates CO2 nearly 50-80% less than OPC. This paper is the general assessment of current report on the fresh and hardened properties of alkali-activated fly ash (AAF), alkali-activated slag (AAS), and alkali activated slag and fly ash (AASF) concrete. In the recent epoch, there has been a progression to blend slag with fly ash to fabricate ambient cured alkali-activated concrete. Along with that the factors like environmental friendliness, advanced studies and investigation are also mandatorily required on the alkali activated slag and fly ash concrete. In this way, the slag to fly ash proportion impacts the essential properties and practical design of AAC. This discusses and reports the issue in an intensive manner in the following sections. This will entail providing a good considerate of the following virtues like workability, compressive strength, tensile strength, durability issues, ambient and elevated-temperature curing of AAC which will improve further investigation to elaborate the correct test methods and to commercialize it.

scholarly journals Properties of oil palm shell lightweight aggregate concrete containing fly ash as partial cement replacement

2020 ◽  
Vol 849 ◽  
pp. 012048
Author(s):  
Khairunisa Muthusamy ◽  
Mohamad Safwan Jaafar ◽  
Nili Wahida Azhar ◽  
Nurazzimah Zamri ◽  
Nadiah Samsuddin ◽  
...  
Keyword(s):  
Fly Ash ◽  
Oil Palm ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Cement Replacement ◽  
Palm Shell ◽  
Oil Palm Shell ◽  
Partial Cement Replacement
Sign in / Sign up

Export Citation Format

Share Document