scholarly journals Laser-Assisted Synthesis and Oxygen Generation of Nickel Nanoparticles

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4068
Author(s):  
Jakub Wawrzyniak ◽  
Jakub Karczewski ◽  
Jacek Ryl ◽  
Katarzyna Grochowska ◽  
Katarzyna Siuzdak
Keyword(s):  
Photoelectron Spectroscopy ◽  
Nickel Nanoparticles ◽  
Size Control ◽  
Metallic Nickel ◽  
X Ray ◽  
Oxygen Generation ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Order Of Magnitude ◽  
Current Densities

Nowadays, more than ever, environmental awareness is being taken into account when it comes to the design of novel materials. Herein, the pathway to the creation of a colloid of spherical, almost purely metallic nickel nanoparticles (NPs) through pulsed laser ablation in ethanol is presented. A complex description of the colloid is provided through UV-vis spectroscopy and dynamic light scattering analysis, ensuring insight into laser-induced nanoparticle homogenization and size-control of the NPs. The transmission electron spectroscopy revealed spherical nanoparticles with a narrow size distribution, whereas the energy-dispersive X-ray spectroscopy accompanied by the X-ray photoelectron spectroscopy revealed their metallic nature. Furthermore, an example of the application of the colloidal nanoparticles is presented, where a quick, five-min ultrasound modification results in over an order of magnitude higher current densities in the titania-based electrode for the oxygen evolution reaction.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

One-Pot Hydrothermal Synthesis of Sulfur-Doped SnO2 Nanoparticles and their Enhanced Photocatalytic Properties

NANO ◽  
2016 ◽  
Vol 11 (03) ◽  
pp. 1650035 ◽  
Author(s):  
Lin Ma ◽  
Limei Xu ◽  
Xuyao Xu ◽  
Xiaoping Zhou ◽  
Lingling Zhang
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Sno2 Nanoparticles ◽  
Light Response ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Light Region ◽  
Vis Spectroscopy

Sulfur-doped SnO2 nanoparticles with ultrafine sizes have been successfully prepared by a one-pot hydrothermal method. The obtained samples are characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), thermogravimetric (TG), analyzer UV-Vis spectroscopy, photoluminescence (PL) and electrochemical impedance spectroscopy (EIS). The experimental results indicate that the doping level of sulfur element as well as the bandgaps of SnO2 can be controlled to a certain extent by varying the amount of L-cysteine (L-cys). When evaluated as photocatalysts in the degradation of rhodamine B (RhB) and reduction of Cr(VI) under visible light region, the resultant sulfur-doped SnO2 nanoparticles demonstrate obviously enhanced photocatalytic activities due to the markedly improved visible light response and effective separation of the photo-generated electron–hole pairs.

Synthesis and characterization of thermosensitive and polarity-sensitive fluorescent PNIPAM-coated gold nanoparticles

e-Polymers ◽  
2017 ◽  
Vol 17 (1) ◽  
pp. 65-70 ◽  
Author(s):  
Chunhua Luo ◽  
Meijuan Qian ◽  
Qiujing Dong
Keyword(s):  
Photoelectron Spectroscopy ◽  
Au Nanoparticles ◽  
Synthesis And Characterization ◽  
Strong Fluorescence ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Grafting Through ◽  
Polarity Sensitive

AbstractThermosensitive PNIPAM-coated Au nanoparticles (AuNPs@P(NIPAM-co-MADMAC)) were synthesized by the radical “grafting through” copolymerization of 4-methacryloyloxy-4′-dimethylaminochalcone (MADMAC), MAEL-capped AuNPs and N-isopropylacrylamide (NIPAM) using azobisisobutyronitrile (AIBN) as the initiator. AuNPs@P(NIPAM-co-MADMAC) were characterized by transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), 1H nuclear magnetic resonance (NMR), and Fourier transform infrared (FTIR) spectroscopy. AuNPs@P(NIPAM-co-MADMAC) exhibited thermo-sensitivity from poly(NIPAM-co-MADMAC) chains and sensitive fluorescence from the MADMAC group. AuNPs@P(NIPAM-co-MADMAC) showed weak fluorescence after the temperature increased from 25°C to 45°C, or after β-cyclodextrin (β-CD) was added. Furthermore, it exhibited strong fluorescence when the solvent was changed to ethanol or chloroform.

scholarly journals Au@Ag Core@Shell Nanoparticles Synthesized with Rumex hymenosepalus as Antimicrobial Agent

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Jesús Mauro Adolfo Villalobos-Noriega ◽  
Ericka Rodríguez-León ◽  
César Rodríguez-Beas ◽  
Eduardo Larios-Rodríguez ◽  
Maribel Plascencia-Jatomea ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Bimetallic Nanoparticles ◽  
Lag Phase ◽  
Core Shell ◽  
Root Extract ◽  
Dependent Manner ◽  
X Ray ◽  
Transmission Electron ◽  
Gold Silver ◽  
Vis Spectroscopy

AbstractIn this work, we used a sequential method of synthesis for gold–silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size distribution obtained by Transmission Electron Microscopy (TEM) gives a mean diameter of 36 ± 11 nm for Au@AgNPs, 24 ± 4 nm for gold nanoparticles (AuNPs), and 13 ± 3 nm for silver nanoparticles (AgNPs). The geometrical shapes of NPs were principally quasi-spherical. The thickness of the silver shell over AuNPs is around 6 nm and covered by active biomolecules onto the surface. Nanoparticles characterization included high angle annular dark field images (HAADF) recorded with a scanning transmission electron microscope (STEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), UV–Vis Spectroscopy, Zeta Potential, and Dynamic Light Scattering (DLS). Fourier Transform Infrared Spectrometer (FTIR), and X-ray Photoelectron Spectroscopy (XPS) show that nanoparticles are stabilized by extract molecules. A growth kinetics study was performed using the Gompertz model for microorganisms exposed to nanomaterials. The results indicate that AgNPs and Au@AgNPs affect the lag phase and growth rate of Escherichia coli and Candida albicans in a dose-dependent manner, with a better response for Au@AgNPs

In-Situ Preparation of Binary-Phase Silver Nanoparticles at a High Ag+ Concentration

2006 ◽  
Vol 6 (3) ◽  
pp. 777-782 ◽  
Author(s):  
Md. Habib Ullah ◽  
Il Kim ◽  
Chang-Sik Ha
Keyword(s):  
Silver Nanoparticles ◽  
Size Distribution ◽  
Photoelectron Spectroscopy ◽  
Metal Salt ◽  
Water Soluble ◽  
The Other ◽  
X Ray ◽  
In Situ Preparation ◽  
Transmission Electron ◽  
Vis Spectroscopy

Stable and monodisperse silver nanoparticles (NPs) have been synthesized using high metal salt concentration (up to 0.735 M) through a simple but novel technique. It is based on one-step procedure that uses glycerol for reducing Ag+ in the presence of o-phenylenediamine (o-PDA) resulting the nanoparticles are in two forms (one water-soluble, the other a precipitated). The water-soluble phase contains NPs that have a bimodal size distribution (2–3 and 5–6 nm); the other comprises precipitated NPs, having a unimodal size distribution (2–3 nm). The water-soluble NPs are covalently bonded to the aromatic amine molecules to form isolated units, while the precipitated nanoparticles are embedded in the networks formed by cross-linking between COOH groups of hydroxypyruvic acid (oxidized form of glycerol) and NH2 groups of o-PDA molecules. We used transmission electron microscopy (TEM), UV–Vis spectroscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) to characterize the silver products obtained.

scholarly journals Synthesis, Characterization and Photocatalytic Performance of Calcined ZnCr-Layered Double Hydroxides

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3051
Author(s):  
Somia Djelloul Bencherif ◽  
Juan Jesús Gallardo ◽  
Iván Carrillo-Berdugo ◽  
Abdellah Bahmani ◽  
Javier Navas
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Textural Properties ◽  
Operational Parameters ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Crystal Violet Dye ◽  
Double Hydroxide ◽  
Double Hydroxides

The development of new materials for performing photocatalytic processes to remove contaminants is an interesting and important research line due to the ever-increasing number of contaminants on our planet. In this sense, we developed a layered double hydroxide material based on Zn and Cr, which was transformed into the corresponding oxide by heat treatment at 500 °C. Both materials were widely characterized for their elemental composition, and structural, morphological, optical and textural properties using several experimental techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, UV-vis spectroscopy and physisorption techniques. In addition, the photocatalytic activity of both materials was analysed. The calcined one showed interesting photocatalytic activity in photodegradation tests using crystal violet dye. The operational parameters for the photocatalytic process using the calcined material were optimised, considering the pH, the initial concentration of the dye, the catalyst load, and the regeneration of the catalyst. The catalyst showed good photocatalytic activity, reaching a degradation of 100% in the optimised conditions and showing good performance after five photodegradation cycles.

scholarly journals Physical Characteristics of Titania Nanofibers Synthesized by Sol-Gel and Electrospinning Techniques

2010 ◽  
Vol 5 (1) ◽  
pp. 155892501000500 ◽  
Author(s):  
Soo-Jin Park ◽  
Yong C. Kang ◽  
Ju Y. Park ◽  
Ed A. Evans ◽  
Rex D. Ramsier ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Average Diameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Ceramic Nanofibers ◽  
Titania Nanofibers

Titania nanofibers were successfully synthesized by sol-gel coating of electrospun polymer nanofibers followed by calcining to form either the pure anatase or rutile phases. Characterization of these materials was carried out using scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy techniques. The average diameter of these ceramic nanofibers was observed to be around 200 nm for both the rutile and anatase forms. The valence band structure and optical absorption thresholds differ, however, indicating that nanofibrous mats of titania can be selectively developed for different applications in catalysis and photochemistry.

scholarly journals Metal Nanoparticles Formation from Nickel Hydroxide

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4689 ◽  
Author(s):  
Elena N. Sidorova ◽  
Ella L. Dzidziguri ◽  
Yulia P. Vinichenko ◽  
Dmitriy Yu. Ozherelkov ◽  
Alexander S. Shinkaryov ◽  
...  
Keyword(s):  
Nickel Hydroxide ◽  
Photoelectron Spectroscopy ◽  
Initial Conditions ◽  
Nitrogen Adsorption ◽  
Metallic Nickel ◽  
Nitrate Hexahydrate ◽  
X Ray ◽  
Nickel Nanoparticle ◽  
Nickel Powders ◽  
Transmission Electron

In this study, the mechanism of nickel nanoparticle formation from its hydroxide was analyzed. Metallic nickel nanoparticles were obtained through the hydroxide’s reduction under hydrogen. Nickel hydroxides were produced from nickel (II) nitrate hexahydrate and NaOH by deposition under various initial conditions. The influence of washing treatment on the dispersion of obtained nickel powders was studied. The washing procedure of precipitates was carried out by centrifugation, ultrasonic treatment, and decantation. X-ray diffractometry, transmission electron microscopy, low-temperature nitrogen adsorption, infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy methods were used for nanoparticle characterization. Based on the resulting data, a model of the Ni(OH)2 aggregate structure after deposition was proposed. The number of nickel hydroxide particles required to form one nickel nanoparticle was estimated, and a model of its formation was proposed.

Fabrication, characterization, and leach testing of hollandite, (Ba,Cs)(Al,Ti)2Ti6O16

2002 ◽  
Vol 17 (10) ◽  
pp. 2578-2589 ◽  
Author(s):  
M. L. Carter ◽  
E. R. Vance ◽  
D. R. G. Mitchell ◽  
J. V. Hanna ◽  
Z. Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Surface Coatings ◽  
Release Rates ◽  
Dissolution Rates ◽  
Cross Sectional ◽  
X Ray ◽  
Free Sample ◽  
Transmission Electron ◽  
Order Of Magnitude

The dissolution in de-ionized water (DIW) at 90 and 150 °C of Cs and Ba from mechanically polished Cs-doped Ba hollandite samples is essentially congruent. The normalized Ba and Cs release rates were <0.001 g/m2/day after 56 days in DIW at 90 °C, and the Ba normalized release rate of a Cs-free sample was 0.01 g/m2/day after 56 days in DIW at 150 °C. Varying the pH between approximately 2.5 and 12.9 affected only the Ba dissolution rates of hollandite by half an order of magnitude. The dissolution rates of all species decrease with increasing leaching time due to the formation of partly impervious surface coatings of Al- and Ti-rich species. These surface coatings were investigated by scanning electron microscopy, and in some cases by cross-sectional transmission electron microscopy and x-ray photoelectron spectroscopy.

Facile Synthesis of Phase Tunable MoO3 Nanostructures and Their Electrochemical Sensing Properties

2020 ◽  
Vol 20 (5) ◽  
pp. 2823-2831
Author(s):  
S. Muthamizh ◽  
C. Sengottaiyan ◽  
R. Jayavel ◽  
V. Narayanan
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Sensing ◽  
X Ray Diffraction ◽  
Facile Synthesis ◽  
X Ray ◽  
Solid State Decomposition ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Ft Ir

MoO3 nanostructures with tunable phases such as α-MoO3, β-MoO3 and their mixed phases were synthesized via a simple solid state decomposition method and employed as electrocatalyst for the detection of biomolecule. The phase and crystal structure of the synthesized MoO3 nanostructures were confirmed through X-ray diffraction (XRD) studies. The MoO3 nanostructures were also characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy for their structural, chemical state and optical properties, respectively. The observed results confirmed the successful formation of phase tunable MoO3 nanostructures. The surface texture and morphology of the samples was characterized by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The obtained images showed the formation of hexagons, cubes and rods morphology of MoO3. The synthesized MoO3 nanostructures were used to modify the surface of glassy carbon electrode (GCE) to detect biomolecule (quercetin).

Sign in / Sign up

Export Citation Format

Share Document