scholarly journals Comparative Analysis of Thermophysiological Comfort-Related Properties of Elastic Knitted Fabrics for Cycling Sportswear

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4024
Author(s):  
Yetanawork Teyeme ◽  
Benny Malengier ◽  
Tamrat Tesfaye ◽  
Simona Vasile ◽  
Lieva Van Langenhove
Keyword(s):  
Thermal Conductivity ◽  
Specific Activity ◽  
Water Vapor Permeability ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Activity Levels ◽  
Knitted Fabrics ◽  
Drying Time ◽  
Moisture Management ◽  
Fabric Weight

This research focused on the investigation of the thermophysiological comfort properties of four selected knitted fabrics of different fiber blend ratios suitable for cycling wear. Comfort-related properties of the fabrics were determined and compared including air permeability, moisture management properties, drying time, thermal conductivity, and water vapor permeability. For those comfort properties of the fabric to be correlated, fabric structural properties, fabric density, fabric weight, and fabric thickness have been considered. Suited fabrics should have good air permeability, thermal conductivity, moisture management properties, and a short drying time. According to the measurement results, the fabric polyamide/elasane (58/42 PA6.6/EL) with good air permeability, thermal conductivity, moisture management properties, and short drying time was more suited for summer cycling clothing. Furthermore, this paper provides a new understanding of considerations that are needed for several end uses involving specific activity levels.

scholarly journals Comprehensive Assessment of the Properties of Cotton Single Jersey Knitted Fabrics Produced From Different Lycra States

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Amany Khalil ◽  
Abdelmonem Fouda ◽  
Pavla Těšinová ◽  
Ahmed S. Eldeeb
Keyword(s):  
Cotton Fabric ◽  
Elastic Recovery ◽  
Water Vapor Permeability ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Fabric Sample ◽  
Dual Core ◽  
Single Jersey

AbstractThis research aims to evaluate the properties of cotton single jersey knitted fabrics (SJKF) produced from cotton/spandex yarns at different Lycra states. So, four different SJKF were produced, namely 100% cotton, cotton with additional Lycra (full-platted), core, and dual-core-spun (DCS) yarns with the same loop length. The thermal comfort properties, fabric recovery, total hand value (THV), moisture management parameters, and air permeability were measured. The experimental results showed that the use of DCS yarns in the SJKF improves the fabric elastic recovery by 100%. The obtained values of air permeability, THV, and overall moisture management capacity of stretched SJKF are lower than 100% cotton fabric sample. Thermal absorptivity of core and dual-core samples increased by 27% and the water vapor permeability decreased by 18% compared to 100% cotton fabric sample.

The effects of the combined process of enzymatic bleach clean-up, enzymatic defibrillation and dyeing on the comfort and physical properties of Tencel/cotton knitted fabrics

2019 ◽  
Vol 90 (9-10) ◽  
pp. 1118-1129
Author(s):  
Sibel Şardağ ◽  
Tuba Toprak ◽  
Pervin Aniş
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor ◽  
Physical Properties ◽  
Water Vapor Permeability ◽  
Lower Surface ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Knitted Fabrics ◽  
Single Bath ◽  
Loss Of Mass

This study aimed to investigate the comfort and physical properties of raw and finished knitted fabrics made of yarns with different Tencel/cotton blend ratios. For this purpose, Ne 20 yarns were produced with the same twist coefficient on the same production line. Fabric samples were produced on the same knitting machine. The raw fabrics were subjected to two different combined enzymatic pre-treatments and dyeing processes. In the first process, enzymatic defibrillation and dyeing were carried out in the same bath. In the second, enzymatic bleach clean-up, defibrillation and dyeing were conducted in the same bath. The comfort and physical properties of all the raw and finished fabric samples were measured according to the relevant standards. The results were assessed statistically. The results of this study showed that with increased percentage of Tencel in the blend, the water vapor and air permeability, fabric roughness, pilling, thermal absorption and loss of mass values of the fabrics increased, whereas thermal conductivity values decreased. It was observed that the fabrics which were subjected to enzymatic defibrillation and dyeing processes in a single bath gave lower surface roughness and abrasion values but higher air permeability values; while those subjected to enzymatic bleach clean-up, defibrillation and dyeing in a single bath gave higher thermal conductivity and thermal absorptivity values. Comparison of the two processes showed that there were no significant differences in the pilling and the water vapor permeability values obtained from both processes.

scholarly journals The Influence of Knitted Fabrics’ Structure on the Thermal and Moisture Management Properties

2011 ◽  
Vol 6 (4) ◽  
pp. 155892501100600 ◽  
Author(s):  
Elena Onofrei ◽  
Ana Maria Rocha ◽  
André Catarino
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor ◽  
Water Vapor Permeability ◽  
Raw Material ◽  
Vapor Permeability ◽  
Structure Parameters ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Knitted Structure ◽  
Selection Of

This paper studies the influence of fabric's structure on the thermal and moisture management properties of knitted fabrics made of two types of yarns with thermo-regulating effect: Coolmax® and Outlast®. The main purpose of this study was the selection of the most adequate fabric, to be used in summer and winter sportswear. The results demonstrated that some properties, such as, thermal properties, diffusion ability, air and water vapor permeability are influenced by both raw material type and knitted structure parameters. Wicking ability is influenced to a greater extent by the knitted structure, while the drying ability is primarily determined by raw material and to a lesser extent by the knitted structure parameters. Outlast® fabrics are preferred candidates for warmer climate sportswear, particularly due to their lower thermal resistance, higher thermal conductivity and absorptivity, air and water vapor permeability. When considering sportswear for colder weather, Coolmax® based structures seem to be the best choice. These findings are an important tool in the design of a sportswear product tailored to the different body areas thermal and moisture management requirements.

scholarly journals Characteristics of Knitted Structures Produced by Engineered Polyester Yarns and Their Blends in Terms of Thermal Comfort

2015 ◽  
Vol 10 (1) ◽  
pp. 155892501501000 ◽  
Author(s):  
Nida Oğlakcioğlu ◽  
Ahmet Çay ◽  
Arzu Marmarali ◽  
Emel Mert
Keyword(s):  
Water Vapor ◽  
Thermal Comfort ◽  
Moisture Transfer ◽  
Water Vapor Permeability ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Moisture Management ◽  
Thermal Comfort Properties ◽  
Knitted Structure ◽  
Drying Properties

Engineered yarns are used to provide better clothing comfort for summer garments because of their high levels of moisture and water vapor management. The aim of this study was to investigate the characteristics of knitted structures that were produced using different types of polyester yarns in order to achieve better thermal comfort properties for summer clothing. However they are relatively expensive. Therefore, in this study engineered polyester yarns were combined with cotton and lyocell yarns by plying. This way, the pronounced characteristics of these yarns were added to the knitted structure as well. Channeled polyester, hollow polyester, channeled/hollow blended polyester, cotton, and lyocell yarns were plied with each other and themselves. Then, single jersey structures were knitted using these ply yarn combinations and air permeability, thermal resistance, thermal absorptivity, water vapor permeability, moisture management, and drying properties were tested. The results indicate that channeled PES fabrics are advantageous for hot climates and high physical activities with regards to high permeability and moisture transfer and also to fast drying properties. Besides, air permeability and thermal properties improved through the combination of lyocell yarn with engineered polyester yarns. However, the use of lyocell or cotton with engineered yarns resulted in a to a decrease in moisture management properties and an increase in drying times

scholarly journals Thermo-physiological Comfort Properties of Polyester and Polyester/Acrylic blended Synthetic Fabrics treated with Herbal Finishes

2014 ◽  
Vol 9 (3) ◽  
pp. 155892501400900
Author(s):  
Gunasekaran Govindachetty ◽  
Periyasamy Sidhan ◽  
Koushik C. Venkatraman
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor Permeability ◽  
The Body ◽  
Bermuda Grass ◽  
Vapor Permeability ◽  
Moisture Management ◽  
Hydrophobic Nature ◽  
Medicinal Properties ◽  
Moisture Vapor ◽  
Natural Fabrics

Thermo-physiological comfort in clothing mainly lies in moisture management, which often refers to the transport of both moisture vapor and liquid away from the body. Moisture management of fabrics is chiefly influenced by the thermal properties of those fabrics. In spite of the convincing properties that synthetic fabrics have, they are not much preferred because of their hydrophobic nature which provides less comfort to the wearer compared to the natural fabrics like cotton, wool, and silk. Previous studies report that the herbal finishes, which are eco-friendly in nature, improve the anti-microbial and other medicinal properties but very little or no work has been carried out on the comfort aspect of these fabrics. This work reports a study of the influence of two ecofriendly herbal finishes, Neem and Bermuda grass, on the thermo-physiological comfort properties of synthetic fabrics used in clothing. The herbal finishes were applied on to 100% Polyester and 50/50 Polyester/Acrylic blended fabrics. Prior to the application of finishes, the fabrics were given a pretreatment to achieve a better penetration and durability of the finishes. The finished fabrics were tested for the thermo-physiological comfort properties of Wicking, Water vapor permeability, and Thermal conductivity and the results were analyzed. It was revealed that both the Neem and Bermuda grass natural finishes considerably improved the moisture related properties and moderately reduced the thermal conductivity characteristics of the above synthetic fabrics. Durability to washing was also tested and discussed.

scholarly journals Characterization of functional single jersey knitted fabrics using non-conventional yarns for sportswear

2016 ◽  
Vol 88 (3) ◽  
pp. 275-292 ◽  
Author(s):  
Jefferson M Souza ◽  
Sandra Sampaio ◽  
Welter C Silva ◽  
Sidney G de Lima ◽  
Andrea Zille ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Water Vapor Permeability ◽  
Thermal Control ◽  
Vapor Permeability ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Antimicrobial Efficiency ◽  
Technical Textiles ◽  
Single Jersey

Eight functional single jersey plain knitted fabrics have been developed in order to assess a quantitative analysis of various comfort-related properties in terms of thermal control, air and water vapor permeability, wickability, coefficient of kinetic friction and antimicrobial efficiency, using eight different commercially available functional yarns: Polyester Craque® and viscose Craque® conventional yarns as controls; Finecool® and Coolmax® polyester yarns for moisture management and quick drying; Holofiber® polyester yarns containing an optical responsive material that the producer claims to improve body oxygenation; Airclo® polyester hollow yarns for efficient control of body temperature; and, finally, polyester Trevira® and viscose Seacell® for antimicrobial activity. According to the results, Coolmax® for moisture management, Airclo® for thermal control and Seacell® for antimicrobial activity present the best performances as technical textiles for sportswear for the respective specific functional property.

scholarly journals Analyzing Thermophysiological Comfort and Moisture Management Behavior of Cotton Denim Fabrics

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Selin Hanife Eryuruk
Keyword(s):  
Great Influence ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Fiber Properties ◽  
Moisture Management ◽  
Drying Behavior ◽  
Fabric Weight ◽  
Capabilities Transfer ◽  
Thermal Absorptivity ◽  
Light Medium

AbstractComfort properties of garments are influenced by fiber properties, fabric properties, and applied finishes. Denim garments are widely used apparels, and they are processed with different industrial finishing treatments. Finishing treatments and fabric weight have a great influence on the thermal comfort of denim fabrics. The aim of this paper was to evaluate the effects of finishing treatments (rigid, bleaching, resin, softener) on the thermophysiological comfort and moisture management properties of denim fabrics considering three weight categories (light, medium, heavy). The thermophysiological comfort (thermal resistance, thermal absorptivity, air permeability, water vapor permeability tests) and liquid moisture transport capabilities (transfer wicking and drying behavior of fabrics) were measured and analyzed statistically. As a result of the study, fabric weight and finishing had been found to be important parameters for the comfort properties of denim fabrics. As a conclusion, it could be stated in the light of the results that the fabric weight type (light, medium, heavy) had a significant impact on the fabric thermophysiological comfort properties.

Characteristics of Laminates for Car Seats

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Eva Batič ◽  
Dunja Šajn Gorjanc
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor ◽  
Abrasion Resistance ◽  
Water Vapor Permeability ◽  
Areal Density ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Car Seats ◽  
Basic Characteristics ◽  
Nonwoven Textiles

AbstractIn the presented research, 11 different laminates were compared, 8 of them were two-layered 3 of them were three-layered laminates. The laminates that were analyzed vary by the type of face-side textile material (knitted and nonwoven textiles), density and thickness of the foam, and specific properties (higher air permeability and low-emission foam). Depending on the different types of laminates, different laminating processes are used: hot-melt, flame, and powder laminations. The purpose of the presented research is to analyze the basic characteristics of the different laminate structures. Properties that are important for these types of laminates are the number of layers, areal density, thickness, resistance to rubbing, fire resistance, water vapor permeability, air permeability, breaking force and extension, thermal conductivity, and stratification. We found that the properties of laminates were not affected by the density and thickness of the foam. Nonwovens and other laminate components do not perform because they have lower abrasion resistance and lower tensile strength than knitted fabrics as the face layer. Knit laminates have good abrasion resistance, high air permeability, and water vapor permeability. Both are self-extinguishing to the first or second mark. Three-layered laminates have lower thermal conductivity and air permeability than two-layered laminates.

Thermal comfort properties of weft knitted quilted fabrics

2020 ◽  
Vol 32 (6) ◽  
pp. 837-847 ◽  
Author(s):  
Sadaf Aftab Abbasi ◽  
Arzu Marmaralı ◽  
Gözde Ertekin
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor ◽  
Thermal Resistance ◽  
Thermal Comfort ◽  
Water Vapor Permeability ◽  
Air Permeability ◽  
Vapor Permeability ◽  
Content Type ◽  
Thermal Comfort Properties ◽  
Thermal Absorptivity

PurposeThis paper investigates the thermal comfort properties of quilted (jersey cord) fabrics produced with different width of diamond pattern, different filling yarn linear density and different types of material.Design/methodology/approachA total of 12 fabrics were knitted by varying the width of diamond pattern (1 and 3 cm), the filling yarn linear density (300 and 900 denier) and the type of materials (cotton, polyester and their combination). In this regard, air permeability, thermal conductivity, thermal resistance, thermal absorptivity and relative water vapor permeability of these fabrics were measured and evaluated statistically.FindingsThe results showed that fabrics knitted using cotton yarn in both front and back surfaces exhibit higher thermal conductivity, thermal absorptivity and relative water vapor permeability characteristics; whereas samples knitted using polyester yarn in both surfaces have higher air permeability and thermal resistance. As the linear density of filling yarn increases, thickness and thermal resistance of the samples increase and air permeability, thermal conductivity, water vapor permeability characteristics decrease. When the effect of the width of diamond pattern compared, it is seen that an increase in the width of pattern lead to an increase in thickness and thermal resistance and a decrease in thermal conductivity, thermal absorptivity and water vapor permeability values.Originality/valueMany researches were carried out on the thermal comfort properties of knitted fabrics, however there is a lack of research efforts regarding thermal comfort properties of quilted fabrics.

Effects of Laundering on Moisture Management and Air Permeability of Different Chitosan Treated Nylon 6,6 Elastane Fabrics Using EDTA and Triton X-100

2021 ◽  
Vol 58 (2) ◽  
pp. 97-105
Author(s):  
Nilüfer Yıldız Varan ◽  
Yavuz Çaydamlı
Keyword(s):  
Photoelectron Spectroscopy ◽  
Ethylenediaminetetraacetic Acid ◽  
Lower Layer ◽  
Air Permeability ◽  
Complexing Agent ◽  
Three Solutions ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Nylon 6,6 ◽  
Triton X

Abstract This study investigates the effect of washing fabrics (nylon 6.6 powernet knitted fabrics with 30% spandex) treated with chitosan on their moisture management and air permeability. The knitted fabrics were treated with three different solutions of chitosan and dimethylol dihydroxyethylene urea (DMDHEU); in addition to chitosan and DMDHEU, one solution contained the complexing agent ethylenediaminetetraacetic acid (EDTA) and the other contained the nonionic surfactant and penetration agent octylphenol ethoxylate. The three solutions were compared in terms of their effect on moisture management and air permeability properties. Nylon fabrics treated and washed with these solutions were characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Nylon fabrics treated with chitosan and DMDHEU showed the potential to transfer liquid moisture to the lower layer and keep the layer next to the skin dry after 20 washes.

Sign in / Sign up

Export Citation Format

Share Document