scholarly journals Corrosion Resistance of Concrete Reinforced by Zinc Phosphate Pretreated Steel Fiber in the Presence of Chloride Ions

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3636
Author(s):  
Xingke Zhao ◽  
Runqing Liu ◽  
Wenhan Qi ◽  
Yuanquan Yang

This paper aims to provide new insight into a method to improve the chloride ion corrosion resistance of steel fiber reinforced concrete. The steel fiber was pretreated by zinc phosphate before the preparation of the fiber reinforced concrete. Interfacial bond strength, micro-hardness and micro-morphology properties were respectively analyzed in the steel fiber reinforced concrete before and after the chloride corrosion cycle test. The results show that the chloride ion corrosion resistance of the steel fiber was enhanced by zinc phosphate treatment. Compared to plain steel fiber reinforced concrete under chloride ion corrosion, the interfacial bond strength of the concrete prepared by steel fiber with phosphating treatment increased by 15.4%. The thickness of the interface layer between the pretreated steel fiber and cement matrix was reduced by 50%. The micro-hardness of the weakest point in the interface area increased by 54.2%. The micro-morphology of the interface area was almost unchanged before and after the corrosion. The steel fiber reinforced concrete modified by zinc phosphate can not only maintain the stability of the microstructure when corroded by chloride ion but also presents good bearing capacity.

2010 ◽  
Vol 168-170 ◽  
pp. 1762-1766
Author(s):  
Min Sun ◽  
Di Jiang Wen ◽  
Peng Xie

The interface bond between steel fibers and concrete matrix is the key of carrying capacity of steel fiber reinforced concrete(SFRC). In marine tidal fluctuation zone and splashed area, steel fibers will be rusty, and the bending toughness of SFRC was weakened. In this study, we tried to improve corrosion resistance of steel fiber and the interface bond strength by depositing zinc phosphate coating on steel fiber. These zinc phosphate steel fiber reinforced concrete(ZSFRC) have higher anti-corrosion ability. After corrosion they still have higher bending toughness than common SFRC.


2017 ◽  
Vol 18 (2) ◽  
pp. 139-147
Author(s):  
William Aperador-Chaparro ◽  
◽  
Julián Carrillo-León ◽  
Jhon Cárdenas-Pulido ◽  
◽  
...  

2009 ◽  
Vol 79-82 ◽  
pp. 1771-1774
Author(s):  
Min Bai ◽  
Di Tao Niu ◽  
Xiong Wu

In recent years, the concrete material subject to chloride corrosion which impacts greatly on the durability of the building project in the marine or coastal environment has been reported repeatedly. With the problems becoming more and more serious, much attention has been paid on it gradually. To improve the durability of the concrete structure in the marine environment, the author tried to add the different content of steel fiber into the concrete and research the permeability of the concrete in the chloride environment. Four different volumes of steel fiber were selected to prepare the concrete. The dates of the proportion are as follows, 1)0.5%; 2)1%; 3)1.5%; 4)2%. Leave the steel fiber reinforced concrete and plain concrete to soak in the sodium chloride solution which mass percent is 3.5%. The soak time is 30, 60, 90,120, 180 days separately. Among this, the test items include the penetration depth of chloride, the chloride ion content and the splitting strength after soaking period. As a result of the test, it is demonstrated that chloride penetration-resistant of steel fiber reinforced concrete is better than plain concrete. The best performance is obtained when the content of steel fiber is 1.5%. The results will be very useful to the concrete professional dealing with chloride-ion penetration. In conclusion, it is convinced that the application of this result in marine engineering will bring well economic and social environmental benefits for the society.


2010 ◽  
Vol 168-170 ◽  
pp. 1756-1761 ◽  
Author(s):  
Zhi Xiong Tao ◽  
Qi Lin Zhang ◽  
Jun Chen ◽  
Bu Ying Xie

The interface bond between steel fibers and concrete matrix is the key of carrying capacity of steel fiber reinforced concrete(SFRC). In marine tidal fluctuation zone and splashed area, steel fibers will be rusty, and the bending toughness of SFRC was weakened. In this study, we tried to improve corrosion resistance of steel fiber and the interface bond strength by depositing zinc phosphate coating on steel fiber. These zinc phosphate steel fiber reinforced concrete(ZSFRC) have higher anti-corrosion ability. After corrosion they still have higher bending toughness than common SFRC.


2017 ◽  
Vol 59 (7-8) ◽  
pp. 653-660 ◽  
Author(s):  
Wang Yan ◽  
Ge Lu ◽  
Chen Shi Jie ◽  
Zhou Li ◽  
Zhang Ting Ting

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.


1984 ◽  
Vol 21 (3) ◽  
pp. 108-111
Author(s):  
V. S. Sterin ◽  
V. A. Golubenkov ◽  
G. S. Rodov ◽  
B. V. Leikin ◽  
L. G. Kurbatov

Sign in / Sign up

Export Citation Format

Share Document