scholarly journals Efficient Doxorubicin Loading to Isolated Dexosomes of Immature JAWSII Cells: Formulated and Characterized as the Bionanomaterial

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3344
Author(s):  
Esra Cansever Mutlu ◽  
Özge Kaya ◽  
Matthew Wood ◽  
Imre Mager ◽  
Kübra Çelik Topkara ◽  
...  
Keyword(s):  
Scale Up ◽  
Small Scale ◽  
Sem Image ◽  
Zeta Potentials ◽  
Immature Dendritic Cells ◽  
Ic50 Values ◽  
Confocal Images ◽  
Cancer Diagnose ◽  
Loading Amount ◽  
Good Agreement

Immature dendritic cells (IDc), ‘dexosomes’, are promising natural nanomaterials for cancer diagnose and therapy. Dexosomes were isolated purely from small-scale-up production by using t25-cell-culture flasks. Total RNA was measured as 1.43 ± 0.33 ng/106 cell. Despite the fact that they possessed a surface that is highly abundant in protein, this did not become a significant effect on the DOX loading amount. Ultrasonication was used for doxorubicin (DOX) loading into the IDc dexosomes. In accordance with the literature, three candidate DOX formulations were designed as IC50 values; dExoIII, 1.8 µg/mL, dExoII, 1.2 µg/mL, and dExoI, 0.6 µg/mL, respectively. Formulations were evaluated by MTT test against highly metastatic A549 (CCL-185; ATTC) cell line. Confocal images of unloaded (naïve) were obtained by CellMaskTM membrane staining before DOX loading. Although, dexosome membranes were highly durable subsequent to ultrasonication, it was observed that dexosomes could not be stable above 70 °C during the SEM-image analyses. dExoIII displayed sustained release profile. It was found that dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) results were in good agreement with each other. Zeta potentials of loaded dexosomes have approximately between −15 to −20 mV; and, their sizes are 150 nm even after ultrasonication. IDcJAWSII dexosomes can be able to be utilized as the “BioNanoMaterial” after DOX loading via ultrasonication technique.

scholarly journals Scale-Up Preparation of Crocins I and II from Gardeniajasminoides by a Two-Step Chromatographic Approach and Their Inhibitory Activity Against ATP Citrate Lyase

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3137
Author(s):  
Shuguang Guan ◽  
Qiaoli Pu ◽  
Yinan Liu ◽  
Honghong Wu ◽  
Wenbo Yu ◽  
...  
Keyword(s):  
Inhibitory Activity ◽  
High Speed ◽  
Scale Up ◽  
Cost Effective ◽  
Atp Citrate Lyase ◽  
Gardenia Jasminoides ◽  
Citrate Lyase ◽  
Human Disorders ◽  
Ic50 Values ◽  
Counter Current

Crocins are highly valuable natural compounds for treating human disorders, and they are also high-end spices and colorants in the food industry. Due to the limitation of obtaining this type of highly polar compound, the commercial prices of crocins I and II are expensive. In this study, macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC) was used to purify crocins I and II from natural sources. With only two chromatographic steps, both compounds were simultaneously isolated from the dry fruit of Gardenia jasminoides, which is a cheap herbal medicine distributed in a number of countries. In an effort to shorten the isolation time and reduce solvent usage, forward and reverse rotations were successively utilized in the HSCCC isolation procedure. Crocins I and II were simultaneously obtained from a herbal resource with high recoveries of 0.5% and 0.1%, respectively, and high purities of 98.7% and 99.1%, respectively, by HPLC analysis. The optimized preparation method was proven to be highly efficient, convenient, and cost-effective. Crocins I and II exhibited inhibitory activity against ATP citrate lyase, and their IC50 values were determined to be 36.3 ± 6.24 and 29.7 ± 7.41 μM, respectively.

scholarly journals Solid Form and Phase Transformation Properties of Fexofenadine Hydrochloride during Wet Granulation Process

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 802
Author(s):  
Suye Li ◽  
Hengqian Wu ◽  
Yanna Zhao ◽  
Ruiyan Zhang ◽  
Zhengping Wang ◽  
...  
Keyword(s):  
Phase Transition ◽  
Phase Transformation ◽  
Water Content ◽  
Scale Up ◽  
Small Scale ◽  
Dissolution Behavior ◽  
Wet Granulation ◽  
Water Addition ◽  
Granulation Process ◽  
And Performance

The quality control of drug products during manufacturing processes is important, particularly the presence of different polymorphic forms in active pharmaceutical ingredients (APIs) during production, which could affect the performance of the formulated products. The objective of this study was to investigate the phase transformation of fexofenadine hydrochloride (FXD) and its influence on the quality and performance of the drug. Water addition was key controlling factor for the polymorphic conversion from Form I to Form II (hydrate) during the wet granulation process of FXD. Water-induced phase transformation of FXD was studied and quantified with XRD and thermal analysis. When FXD was mixed with water, it rapidly converted to Form II, while the conversion is retarded when FXD is formulated with excipients. In addition, the conversion was totally inhibited when the water content was <15% w/w. The relationship between phase transformation and water content was studied at the small scale, and it was also applicable for the scale-up during wet granulation. The effect of phase transition on the FXD tablet performance was investigated by evaluating granule characterization and dissolution behavior. It was shown that, during the transition, the dissolved FXD acted as a binder to improve the properties of granules, such as density and flowability. However, if the water was over added, it can lead to the incomplete release of the FXD during dissolution. In order to balance the quality attributes and the dissolution of granules, the phase transition of FXD and the water amount added should be controlled during wet granulation.

scholarly journals Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Carlo Alberto Niccolini Marmont Du Haut Champ ◽  
Fabrizio Stefani ◽  
Paolo Silvestri
Keyword(s):  
Three Dimensional ◽  
Journal Bearings ◽  
Radial Clearance ◽  
Small Scale ◽  
Test Rig ◽  
Small Clearance ◽  
Dimensional Simulation ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading ◽  
Good Agreement

The aim of the present research is to characterize both experimentally and numerically journal bearings with low radial clearances for rotors in small-scale applications (e.g., microgas turbines); their diameter is in the order of ten millimetres, leading to very small dimensional clearances when the typical relative ones (order of 1/1000) are employed; investigating this particular class of journal bearings under static and dynamic loading conditions represents something unexplored. To this goal, a suitable test rig was designed and the performance of its bearings was investigated under steady load. For the sake of comparison, numerical simulations of the lubrication were also performed by means of a simplified model. The original test rig adopted is a commercial rotor kit (RK), but substantial modifications were carried out in order to allow significant measurements. Indeed, the relative radial clearance of RK4 RK bearings is about 2/100, while it is around 1/1000 in industrial bearings. Therefore, the same original RK bearings are employed in this new test rig, but a new shaft was designed to reduce their original clearance. The new custom shaft allows to study bearing behaviour for different clearances, since it is equipped with interchangeable journals. Experimental data obtained by this test rig are then compared with further results of more sophisticated simulations. They were carried out by means of an in-house developed finite element (FEM) code, suitable for thermoelasto-hydrodynamic (TEHD) analysis of journal bearings both in static and dynamic conditions. In this paper, bearing static performances are studied to assess the reliability of the experimental journal location predictions by comparing them with the ones coming from already validated numerical codes. Such comparisons are presented both for large and small clearance bearings of original and modified RKs, respectively. Good agreement is found only for the modified RK equipped with small clearance bearings (relative radial clearance 8/1000), as expected. In comparison with two-dimensional lubrication analysis, three-dimensional simulation improves prediction of journal location and correlation with experimental results.

SUBMERGED CITRIC ACID FERMENTATION OF SUGAR BEET MOLASSES: INCREASE IN SCALE

1955 ◽  
Vol 1 (5) ◽  
pp. 299-311 ◽  
Author(s):  
R. Steel ◽  
C. P. Lentz ◽  
S. M. Martin
Keyword(s):  
Citric Acid ◽  
Scale Up ◽  
Aeration Rate ◽  
Small Scale ◽  
Acid Fermentation ◽  
Inoculum Level ◽  
Cross Sectional ◽  
Factors Affecting ◽  
Beet Molasses ◽  
Initial Ph

Factors affecting the production of citric acid in the submerged fermentation of ferrocyanide-treated beet molasses by Aspergillus niger were studied in 2.5 and 36 liter fermenters. The small fermenters were used to determine the effects of changes in sterilization technique, phosphate supplement, ferrocyanide treatment, inoculum level, initial pH, fermentation temperature, and aeration rate. The relation between ferrocyanide concentration and inoculum level was also studied. Four different samples of molasses were fermented successfully. An average yield of 8.2% citric acid (64% conversion) was obtained from 51 small-scale fermentations. Comparable yields were obtained in the large fermenters under comparable conditions. Most of the information obtained with the small fermenters was applicable to the larger-scale fermenters, but in the latter the fermentation was significantly more stable. Aeration was the main problem in the scale-up and aeration rates approximately double those calculated on a fermenter cross-sectional area basis were required for comparable results in the large fermenters.

Heat-flow experiments in liquid 4He with a variable cylindrical geometry

1987 ◽  
Vol 174 ◽  
pp. 209-231 ◽  
Author(s):  
H. Gao ◽  
G. Metcalfe ◽  
T. Jung ◽  
R. P. Behringer
Keyword(s):  
Cylindrical Geometry ◽  
Small Scale ◽  
Onset Of Convection ◽  
Aspect Ratios ◽  
A Value ◽  
Prandtl Numbers ◽  
Convection Rolls ◽  
Flow Experiments ◽  
Increasing Function ◽  
Good Agreement

This paper first describes an apparatus for measuring the Nusselt number N versus the Rayleigh number R of convecting normal liquid 4He layers. The most important feature of the apparatus is its ability to provide layers of different heights d, and hence different aspect ratios [Gcy ]. The horizontal cross-section of each layer is circular, and [Gcy ] is defined by [Gcy ] = D/2d where D is the diameter of the layer. We report results for 2.4 [les ] [Gcy ] [les ] 16 and for Prandtl numbers Pr spanning 0.5 [lsim ] Pr [lsim ] 0.9 These results are presented in terms of the slope N1 = RcdN/dR evaluated just above the onset of convection at Rc. We find that N1 is only a slowly increasing function of [Gcy ] in the range 6 [lsim ] [Gcy ] [lsim ] 16, and that it has a value there which is quite close to 0.72. This value of N1 is in good agreement with variational calcuations by Ahlers et al. (1981) pertinent to parallel convection rolls in cylindrical geometry. Particularly for [Gcy ] [lsim ] 6, we find additional small-scale structure in N1 associated with changes in the number of convection rolls with changing [Gcy ]. An additional test of the linearzied hydrodynamics is given by measurements of Rc. We find good agreement between theory and our data for Rc.

scholarly journals Sustainable Second-Generation Bioethanol Production from Enzymatically Hydrolyzed Domestic Food Waste Using Pichia anomala as Biocatalyst

2020 ◽  
Vol 13 (1) ◽  
pp. 259
Author(s):  
Ioanna Ntaikou ◽  
Georgia Antonopoulou ◽  
Gerasimos Lyberatos
Keyword(s):  
Food Waste ◽  
Second Generation ◽  
Scale Up ◽  
Pichia Anomala ◽  
Small Scale ◽  
Amylolytic Enzymes ◽  
Second Generation Bioethanol ◽  
Saccharification Efficiency ◽  
Ethanol Yields ◽  
Domestic Food

In the current study, a domestic food waste containing more than 50% of carbohydrates was assessed as feedstock to produce second-generation bioethanol. Aiming to the maximum exploitation of the carbohydrate fraction of the waste, its hydrolysis via cellulolytic and amylolytic enzymatic blends was investigated and the saccharification efficiency was assessed in each case. Fermentation experiments were performed using the non-conventional yeast Pichia anomala (Wickerhamomyces anomalus) under both separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) modes to evaluate the conversion efficiencies and ethanol yields for different enzymatic loadings. It was shown that the fermentation efficiency of the yeast was not affected by the fermentation mode and was high for all handlings, reaching 83%, whereas the enzymatic blend containing the highest amount of both cellulolytic and amylolytic enzymes led to almost complete liquefaction of the waste, resulting also in ethanol yields reaching 141.06 ± 6.81 g ethanol/kg waste (0.40 ± 0.03 g ethanol/g consumed carbohydrates). In the sequel, a scale-up fermentation experiment was performed with the highest loading of enzymes in SHF mode, from which the maximum specific growth rate, μmax, and the biomass yield, Yx/s, of the yeast from the hydrolyzed waste were estimated. The ethanol yields that were achieved were similar to those of the respective small scale experiments reaching 138.67 ± 5.69 g ethanol/kg waste (0.40 ± 0.01 g ethanol/g consumed carbohydrates).

scholarly journals Assessing market-based conservation governance approaches: a socio-economic profile of Indonesian markets for wild birds

Oryx ◽  
2011 ◽  
Vol 45 (4) ◽  
pp. 482-491 ◽  
Author(s):  
Paul Jepson ◽  
Richard J. Ladle ◽  
Sujatnika
Keyword(s):  
Native Species ◽  
Wildlife Conservation ◽  
Scale Up ◽  
Policy Instrument ◽  
Wild Birds ◽  
Small Scale ◽  
Poor Growth ◽  
Cultural Aspects ◽  
Depth Analysis ◽  
Conservation Governance

AbstractOne of the most difficult situations for conservation is where state capacity to regulate is weak, major corporate organizations are absent, and the population does not have a strong culture of wildlife conservation. All these apply to the hugely popular urban Indonesian pastime of keeping wild songbirds, thought to be responsible for rolling local extinctions of several native species. In such situations the introduction of a voluntary, market-based approach could interact with regulation to create new and more effective approaches to reducing the negative conservation impacts of the associated trade. Here we assess the potential of such an approach through an in-depth analysis of the socio-economic and cultural aspects of bird keeping. We project that overall the pastime contributes USD 78.8 million to the economies of the six cities surveyed, supporting a range of associated small-scale rural and urban livelihoods relating to the production of cages and collection of live bird food. Finally, we describe five general bird-breeding models with the capacity to scale up the production of captive-bred birds that may substitute for wild-caught conspecifics. Based on this information we argue that a market-based policy instrument that is capable of shifting bird-keeping trends from wild-caught birds to captive-bred alternatives would align easily with macro-policy agendas in Indonesia relating to pro-poor growth and the creation of more and better jobs. Such a policy instrument could provide exciting opportunities for conservationists to engage the interest and support of non-conservation sectors in Indonesia in efforts to conserve diminishing populations of wild birds.

scholarly journals Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

2016 ◽  
Vol 53 (5) ◽  
pp. 43-53
Author(s):  
G. Klāvs ◽  
A. Kundziņa ◽  
I. Kudrenickis
Keyword(s):  
New Technologies ◽  
Local Economic Development ◽  
Renewable Energy Sources ◽  
Distribution Network ◽  
Scale Up ◽  
Electricity Production ◽  
Small Scale ◽  
Gas Distribution ◽  
Ex Post ◽  
The Impact

Abstract Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS) and the feed-in tariff (FIT) – on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation) is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors’ estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

scholarly journals TERENO: German network of terrestrial environmental observatories

2016 ◽  
Vol 2 ◽  
Author(s):  
Heye Reemt Bogena
Keyword(s):  
Regional Scale ◽  
Scale Up ◽  
Climate Change Impacts ◽  
Integrated Modelling ◽  
Small Scale ◽  
Catchment Scale ◽  
Terrestrial Environment ◽  
Regional Analyses ◽  
Research Facilities

Central elements of the TERENO network are “terrestrial observatories” at the catchment scale which were selected in climate sensitive regions of Germany for the regional analyses of climate change impacts. Within these observatories small scale research facilities and test areas are placed in order to accomplish energy, water, carbon and nutrient process studies across the different compartments of the terrestrial environment. Following a hierarchical scaling approach (point-plot-field) these detailed information and the gained knowledge will be transferred to the regional scale using integrated modelling approaches. Furthermore, existing research stations are enhanced and embedded within the observatories. In addition, mobile measurement platforms enable monitoring of dynamic processes at the local scale up to the determination of spatial pattern at the regional scale are applied within TERENO.

Sign in / Sign up

Export Citation Format

Share Document