scholarly journals Investigation of Electrocatalysts Produced by a Novel Thermal Spray Deposition Method

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2746
Author(s):  
Walid Hetaba ◽  
Alexander Yu. Klyushin ◽  
Lorenz J. Falling ◽  
Dongyoon Shin ◽  
Anna K. Mechler ◽  
...  
Keyword(s):  
Thermal Spray ◽  
Photoelectron Spectroscopy ◽  
Preparation Method ◽  
Supported Catalysts ◽  
Spray Deposition ◽  
Preparation Methods ◽  
X Ray ◽  
Novel Method ◽  
Supported Electrocatalysts ◽  
Selection Of

Common methods to produce supported catalysts include impregnation, precipitation, and thermal spray techniques. Supported electrocatalysts produced by a novel method for thermal spray deposition were investigated with respect to their structural properties, elemental composition, and electrochemical performance. This was done using electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Various shapes and sizes of catalyst particles were found. The materials exhibit different activity towards oxidation and reduction of Fe. The results show that this preparation method enables the selection of particle coverage as well as size and shape of the catalyst material. Due to the great variability of support and catalyst materials accessible with this technique, this approach is a useful extension to other preparation methods for electrocatalysts.

scholarly journals Oxidative Desulfurization of Tire Pyrolysis Oil over Molybdenum Heteropolyacid Loaded Mesoporous Catalysts

Reactions ◽  
2021 ◽  
Vol 2 (4) ◽  
pp. 457-472
Author(s):  
Jasmine Kaur ◽  
Sundaramurthy Vedachalam ◽  
Philip Boahene ◽  
Ajay K. Dalai
Keyword(s):  
Sulfur Content ◽  
Photoelectron Spectroscopy ◽  
Supported Catalysts ◽  
Surface Acidity ◽  
Oxidative Desulfurization ◽  
Acid Catalyst ◽  
Acid Sites ◽  
Process Conditions ◽  
Pyrolysis Oil ◽  
X Ray

Pyrolysis oil derived from waste tires consists of sulfur content in the range of 7000 to 9000 ppm. For use in diesel engines, its sulfur content must be lowered to 10 to 15 ppm. Though conventional hydrodesulfurization is suitable for the removal of sulfur from tire pyrolysis oil, its high cost provides an avenue for alternative desulfurization technologies to be explored. In this study, oxidative desulfurization (ODS), a low-cost technology, was explored for the desulfurization of tire pyrolysis oil. Two categories of titanium-incorporated mesoporous supports with 20 wt% loaded heteropoly molybdic acid catalyst (HPMo/Ti-Al2O3 and HPMo/Ti-TUD-1) were developed and tested for ODS of tire pyrolysis oil at mild process conditions. Catalysts were characterized by X-ray diffraction, BET-N2 physisorption, and X-ray photoelectron spectroscopy (XPS). The incorporation of Ti into Al2O3 and TUD-1 frameworks was confirmed by XPS. The surface acidity of catalysts was studied by the temperature-programmed desorption of NH3 and pyridine FTIR analyses. HPMo/Ti-Al2O3 and HPMo/Ti-TUD-1 catalysts contained both Lewis and Brønsted acid sites. The presence of titanium in catalysts was found to promote the ODS activity of phosphomolybdic acid. The Ti-TUD-1-supported catalysts performed better than the Ti-Al2O3-supported catalysts for the ODS of tire pyrolysis oil. Hydrogen peroxide and cumene peroxide were found to be better oxidants than tert-butyl hydroperoxide for oxidizing sulfur compounds of tire pyrolysis oil. Process parameter optimization by the design of experiments was conducted with an optimal catalyst along with the catalyst regeneration study. An ANOVA statistical analysis demonstrated that the oxidant/sulfur and catalyst/oil ratios were more significant than the reaction temperature for the ODS of tire pyrolysis oil. It followed the pseudo-first-order kinetics over HPMo/Ti-TUD-1.

Surface Characterization of W/Ni/Al2O3 Catalysts

1997 ◽  
Vol 497 ◽  
Author(s):  
M. H. Jordão ◽  
J. M. Assaf ◽  
P. A. P. Nascente
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Surface Characterization ◽  
Nickel Content ◽  
Stable Phase ◽  
Preparation Methods ◽  
X Ray ◽  
Inductively Coupled ◽  
Temperature Programmed ◽  
Two Phases

ABSTRACTCatalysts containing tungsten and nickel oxides are important in hydrodesulfurization (HDS), hydrogénation (HY), and steam reforming of hydrocarbons. A series of W/Ni/Al2O3 catalysts was prepared by two different methods: (1) coprecipitation of nickel and aluminium hydroxicarbonate from their nitrates, followed by calcination and impregnation of tungsten; (2) precipitation of boehmite from aluminium nitrate, followed by impregnations of nickel, firstly, and tungsten. The nickel content was kept constant, while the amount of tungsten varied from 2.5 to 15.5 wt-%. The resulting oxides were characterized by inductively coupled plasma spectroscopy (ICP), atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). ICP and AAS were used to determine the W, Ni, and Al concentrations. XRD detected two phases: NiO and NiAl2O4 (no phase containing metallic tungsten was detected). Increasing the amount of W, the quantity of NiAl2O4 rose, the quantity of NiO decreased, and the particle size of NiO enlarged. The TPR profiles presented three peaks: one at about 1000 °C, associated to a very stable phase; for the samples prepared by coprecipitation, the other two peaks corresponded to “free NiO” and a nonstoichiometric aluminate. For the samples prepared by impregnation, those peaks corresponded to NiO and NiAl2O4. XPS identified Al2O3, NiAl2O4, and Al2(WO4)3 for both preparation methods. Increasing the amount of tungsten in the impregnated samples, NiWO4 was also observed.

scholarly journals {CeO2/Bi2Mo1−xRuxO6} and {Au/Bi2Mo1−xRuxO6} Catalysts for Low-Temperature CO Oxidation

Catalysts ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 947 ◽  
Author(s):  
Edson Edain González ◽  
Ricardo Rangel ◽  
Javier Lara ◽  
Pascual Bartolo-Pérez ◽  
Juan José Alvarado-Gil ◽  
...  
Keyword(s):  
Co Oxidation ◽  
Photoelectron Spectroscopy ◽  
Supported Catalysts ◽  
Pollutant Emissions ◽  
Impregnation Method ◽  
Wet Impregnation ◽  
X Ray ◽  
Low Temperature Co Oxidation ◽  
Carbon Dioxide Co2 ◽  
Wet Impregnation Method

Nowadays, one of the most important challenges that humanity faces is to find alternative ways of reducing pollutant emissions. CeO2/Bi2Mo1−xRuxO6 and Au/Bi2Mo1−xRuxO6 catalysts were prepared to efficiently transform carbon monoxide (CO) to carbon dioxide (CO2) at low temperatures. The systems were prepared in a two-step process. First, Bi2Mo1−xRuxO6 supports were synthesized through the hydrothermal procedure under microwave heating. Then, CeO2 was deposited on Bi2Mo1−xRuxO6 using the wet impregnation method, while the incipient impregnation method was selected to deposit gold nanoparticles. The CeO2/Bi2Mo1−xRuxO6 and Au/Bi2Mo1−xRuxO6 catalysts were characterized using SEM microscopy and XRD. Furthermore, energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy were used. Tests were carried out for the supported catalysts in CO oxidation, and high conversion values, nearing 100%, was observed in a temperature range of 100 to 250 °C. The results showed that the best system was the Au/Bi2Mo0.95Ru0.05O6 catalyst, with CO oxidation starting at 50 °C and reaching 100% conversion at 186 °C.

scholarly journals The Preparation and Chemical Structure Analysis of Novel POSS-Based Porous Materials

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1954 ◽  
Author(s):  
Xiaomei Yang ◽  
Guangzhong Yin ◽  
Zhiyong Li ◽  
Pengfei Wu ◽  
Xiaopei Jin ◽  
...  
Keyword(s):  
Porous Materials ◽  
Photoelectron Spectroscopy ◽  
Chemical Structure ◽  
Preparation Method ◽  
X Ray Diffraction ◽  
Related Research ◽  
X Ray ◽  
Advantages And Disadvantages ◽  
Solvent Water ◽  
Oligomeric Silsesquioxane

In this work, we reported the preparation and chemical analysis of novel polyhedral oligomeric silsesquioxane (POSS)-based porous materials, which were prepared according to Friedel-Crafts chloromethylation by using aluminum chloride as the catalyst and dichloromethane as the solvent. Through controlling the treatment solvent (water or methanol) and kinds of POSS, several materials with different morphologies were conveniently obtained. The chemical structure of porous materials was systematically characterized by Fourier-transform infrared (FTIR) spectra, 29Si Nuclear Magnetic Resonance (NMR), 13C NMR, and X-ray photoelectron spectroscopy (XPS). The samples were further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) to study their crystallinity, morphology, and thermal properties, respectively. The work systematically demonstrated the chemical structure of the porous materials. Moreover, the advantages and disadvantages of the preparation method and typical properties of the material were evaluated through a comparative analysis with other related research works.

JCPDS — International Centre for Diffraction Data Sample Preparation Methods in X-Ray Powder Diffraction

1986 ◽  
Vol 1 (2) ◽  
pp. 51-63 ◽  
Author(s):  
R. Jenkins ◽  
T. G. Fawcett ◽  
D. K. Smith ◽  
J. W. Visser ◽  
M. C. Morris ◽  
...  
Keyword(s):  
Sample Preparation ◽  
Preparation Method ◽  
Correct Choice ◽  
Stress And Strain ◽  
Diffraction Experiment ◽  
Preparation Methods ◽  
X Ray ◽  
Accuracy And Precision ◽  
Diffraction Angle ◽  
The Ideal

The aim of any diffraction experiment is to obtain reproducible data of high accuracy and precision so that the data can be correctly interpreted and analyzed. Various methods of sample preparation have been devised so that reproducibility, precision and accuracy can be obtained. The success of a diffraction experiment will often depend on the correct choice of preparation method for the sample being analyzed and for the instrument being used in the analysis.A diffraction pattern contains three types of useful information: the positions of the diffraction maxima, the peak intensities, and the intensity distribution as a function of diffraction angle. This information can be used to identify and quantify the contents of the sample, as well as to calculate the material's crystallite size and distribution, crystallinity, and stress and strain. The ideal preparation for a given experiment depends largely on information desired.

scholarly journals Selective Liquid-Phase Oxidation of Toluene with Molecular Oxygen Catalyzed by Mn3O4 Nanoparticles Immobilized on CNTs under Solvent-Free Conditions

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 623
Author(s):  
Yuwei Feng ◽  
Aiwu Zeng
Keyword(s):  
Electron Microscopy ◽  
Liquid Phase ◽  
Benzyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Supported Catalysts ◽  
Liquid Phase Oxidation ◽  
X Ray ◽  
Solvent Free Conditions ◽  
Phase Oxidation ◽  
Mn3o4 Nanoparticles

The catalytic performance of Mn3O4 supported on carbon nanotubes (CNTs) in the liquid-phase oxidation of toluene to benzyl alcohol and benzaldehyde was studied. The supported catalysts were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 adsorption–desorption isotherms and ICP-MS. The results demonstrate that Mn3O4 nanoparticles loaded on CNTs performed better compared with pristine Mn3O4 or CNTs. The main reason for the increased catalytic activity is the dispersion and loading of Mn3O4 in CNTs. By optimizing the reaction temperature, reaction time, catalyst quality, oxygen flow rate and initiator dosage, the optimum reaction conditions were obtained. Using tert-butyl hydroperoxide (TBHP) as the initiator and oxygen as the oxidant, the toluene conversion rate was as high as 24.63%, and benzyl alcohol and benzaldehyde selectivity was 90.49%. The good stability of the catalyst was confirmed by repeating the experiment for four cycles and observing no significant changes in its performance.

scholarly journals Background Estimation in X-ray Photoelectron Spectroscopy Data Using an Active Shirley Method with Automated Selection of the Analytical Range

2019 ◽  
Vol 17 (0) ◽  
pp. 61-68 ◽  
Author(s):  
Ryo Murakami ◽  
Hironori Kageyama ◽  
Kazuki Nakamura ◽  
Hiromi Tanaka ◽  
Hiroshi Shinotsuka ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Spectroscopy Data ◽  
X Ray ◽  
Background Estimation ◽  
Analytical Range ◽  
Selection Of
Sign in / Sign up

Export Citation Format

Share Document