scholarly journals Magnetic Nanomaterials as Contrast Agents for MRI

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2586 ◽  
Author(s):  
Sofia Caspani ◽  
Ricardo Magalhães ◽  
João Pedro Araújo ◽  
Célia Tavares Sousa
Keyword(s):  
Contrast Agents ◽  
Materials Science ◽  
Driving Forces ◽  
Three Dimensional ◽  
Magnetic Nanostructures ◽  
Magnetic Behavior ◽  
Living Organism ◽  
Controlled Drug Release ◽  
Magnetic Nanomaterials ◽  
Nondestructive Technique

Magnetic Resonance Imaging (MRI) is a powerful, noninvasive and nondestructive technique, capable of providing three-dimensional (3D) images of living organisms. The use of magnetic contrast agents has allowed clinical researchers and analysts to significantly increase the sensitivity and specificity of MRI, since these agents change the intrinsic properties of the tissues within a living organism, increasing the information present in the images. Advances in nanotechnology and materials science, as well as the research of new magnetic effects, have been the driving forces that are propelling forward the use of magnetic nanostructures as promising alternatives to commercial contrast agents used in MRI. This review discusses the principles associated with the use of contrast agents in MRI, as well as the most recent reports focused on nanostructured contrast agents. The potential applications of gadolinium- (Gd) and manganese- (Mn) based nanomaterials and iron oxide nanoparticles in this imaging technique are discussed as well, from their magnetic behavior to the commonly used materials and nanoarchitectures. Additionally, recent efforts to develop new types of contrast agents based on synthetic antiferromagnetic and high aspect ratio nanostructures are also addressed. Furthermore, the application of these materials in theragnosis, either as contrast agents and controlled drug release systems, contrast agents and thermal therapy materials or contrast agents and radiosensitizers, is also presented.

scholarly journals Magnetic Nanomaterials as Contrast Agents for MRI

2020 ◽  
Author(s):  
Sofia Caspani ◽  
Ricardo Magalhaes ◽  
João P. Araujo ◽  
Celia T. Sousa
Keyword(s):  
Contrast Agents ◽  
Materials Science ◽  
Driving Forces ◽  
Three Dimensional ◽  
Magnetic Nanostructures ◽  
Magnetic Behavior ◽  
Controlled Drug Release ◽  
Magnetic Nanomaterials ◽  
Living Body ◽  
Magnetic Contrast Agents

Magnetic Resonance Imaging (MRI) is a powerful, non-invasive and nondestructive tool, capable of providing three-dimensional (3D) images of living organisms. The use of magnetic contrast agents has allowed clinical researchers and analysts to enormously increase the sensitivity and specificity of MRI since these substances change the intrinsic properties of the tissues within a living body, increasing the information present in the images. The advances in nanotechnology and materials science as well as the research of new magnetic effects have been the driving forces that propel the use of magnetic nanostructures as promising alternatives to the commercial contrast agents used in MRI. This review discusses the principles associated with the use of contrast agents in MRI as well as the most recent reports focused on nanostructured contrast agents. The potential applications of gadolinium (Gd) and manganese Mn-based nanomaterials and iron oxide nanoparticles in this imaging technique are discussed as well, from their magnetic behavior to the mainly used materials and nanoarchitectures. Then, it is also addressed the recent efforts made to develop new types of contrast agents based on synthetic antiferromagnetic and high-aspect ratio nanostructures. Furthermore, the application of these materials in theragnosis, either as contrast agents and controlled drug release, contrast agents and thermal therapy or contrast agents and radiosensitizers, is also presented.

scholarly journals Cloud Manufacturing, Internet of Things-Assisted Manufacturing and 3D Printing Technology: Reliable Tools for Sustainable Construction

2021 ◽  
Vol 13 (13) ◽  
pp. 7327
Author(s):  
Rajesh Singh ◽  
Anita Gehlot ◽  
Shaik Vaseem Akram ◽  
Lovi Raj Gupta ◽  
Manoj Kumar Jena ◽  
...  
Keyword(s):  
3D Printing ◽  
Internet Of Things ◽  
Materials Science ◽  
Predictive Analytics ◽  
Residential Buildings ◽  
Three Dimensional ◽  
Cloud Manufacturing ◽  
Service Evaluation ◽  
Sustainable Construction ◽  
Access Technology

The United Nations (UN) 2030 agenda on sustainable development goals (SDGs) encourages us to implement sustainable infrastructure and services for confronting challenges such as large energy consumption, solid waste generation, depletion of water resources and emission of greenhouse gases in the construction industry. Therefore, to overcome challenges and establishing sustainable construction, there is a requirement to integrate information technology with innovative manufacturing processes and materials science. Moreover, the wide implementation of three-dimensional printing (3DP) technology in constructing monuments, artistic objects, and residential buildings has gained attention. The integration of the Internet of Things (IoT), cloud manufacturing (CM), and 3DP allows us to digitalize the construction for providing reliable and digitalized features to the users. In this review article, we discuss the opportunities and challenges of implementing the IoT, CM, and 3D printing (3DP) technologies in building constructions for achieving sustainability. The recent convergence research of cloud development and 3D printing (3DP) are being explored in the article by categorizing them into multiple sections including 3D printing resource access technology, 3D printing cloud platform (3D–PCP) service architectures, 3D printing service optimized configuration technology, 3D printing service evaluation technology, and 3D service control and monitoring technology. This paper also examines and analyzes the limitations of existing research and, moreover, the article provides key recommendations such as automation with robotics, predictive analytics in 3DP, eco-friendly 3DP, and 5G technology-based IoT-based CM for future enhancements.

Recent Developments In Monochromatic Microprobe X-Ray Fluorescence (MMXRF)

1998 ◽  
Vol 4 (S2) ◽  
pp. 378-379
Author(s):  
Z. W. Chen ◽  
D. B. Wittry
Keyword(s):  
Materials Science ◽  
High Vacuum ◽  
Three Dimensional ◽  
High Sensitivity ◽  
X Rays ◽  
Fluorescence Excitation ◽  
X Ray ◽  
Quantitative Microanalysis ◽  
Recent Developments ◽  
Fifth Order

A monochromatic x-ray microprobe based on a laboratory source has recently been developed in our laboratory and used for fluorescence excitation. This technique provides high sensitivity (ppm to ppb), nondestructive, quantitative microanalysis with minimum sample preparation and does not require a high vacuum specimen chamber. It is expected that this technique (MMXRF) will have important applications in materials science, geological sciences and biological science.Three-dimensional focusing of x-rays can be obtained by using diffraction from doubly curved crystals. In our MMXRF setup, a small x-ray source was produced by the bombardment of a selected target with a focused electron beam and a toroidal mica diffractor with Johann pointfocusing geometry was used to focus characteristic x-rays from the source. In the previous work ∼ 108 photons/s were obtained in a Cu Kα probe of 75 μm × 43 μm in the specimen plane using the fifth order reflection of the (002) planes of mica.

scholarly journals 3D IMAGING OF INDIVIDUAL PARTICLES: A REVIEW

2012 ◽  
Vol 31 (2) ◽  
pp. 65 ◽  
Author(s):  
Eric Pirard
Keyword(s):  
Literature Review ◽  
Digital Imaging ◽  
Systems Analysis ◽  
3D Imaging ◽  
Materials Science ◽  
Recent Literature ◽  
Three Dimensional ◽  
Shape Estimation ◽  
Individual Particles ◽  
Made In

In recent years, impressive progress has been made in digital imaging and in particular in three dimensional visualisation and analysis of objects. This paper reviews the most recent literature on three dimensional imaging with a special attention to particulate systems analysis. After an introduction recalling some important concepts in spatial sampling and digital imaging, the paper reviews a series of techniques with a clear distinction between the surfometric and volumetric principles. The literature review is as broad as possible covering materials science as well as biology while keeping an eye on emerging technologies in optics and physics. The paper should be of interest to any scientist trying to picture particles in 3D with the best possible resolution for accurate size and shape estimation. Though techniques are adequate for nanoscopic and microscopic particles, no special size limit has been considered while compiling the review.

The Prospect of Three-Dimensional Induction Mapping Inside Magnetic Nanostructures by Combining Electron Holography with Electron Tomography

2004 ◽  
Vol 10 (S02) ◽  
pp. 1010-1011 ◽  
Author(s):  
Rafal E Dunin-Borkowski ◽  
Takeshi Kasama
Keyword(s):  
Electron Tomography ◽  
Three Dimensional ◽  
Magnetic Nanostructures ◽  
Electron Holography

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.

Hydrothermal synthesis, structure and magnetic properties of a three-dimensional cobalt(ii) – aminophenyltetrazolate coordination polymer

2014 ◽  
Vol 43 (19) ◽  
pp. 7263-7268 ◽  
Author(s):  
Tiffany M. Smith ◽  
Michael Tichenor ◽  
Yuan-Zhu Zhang ◽  
Kim R. Dunbar ◽  
Jon Zubieta
Keyword(s):  
Magnetic Properties ◽  
Magnetic Susceptibility ◽  
Hydrothermal Synthesis ◽  
Coordination Polymer ◽  
Three Dimensional ◽  
Magnetic Behavior ◽  
Ac Magnetic Susceptibility

The three-dimensional [Co3(OH)2(H2O)2(aptet)4] exhibits magnetic properties consistent with a ferrimagnetic chain with the non-compensating resultant moment of one Co(ii) per trinuclear Co(ii) subunit and ac magnetic susceptibility indicative of glassy-like magnetic behavior.

scholarly journals High-resolution three-dimensional probes of biomaterials and their interfaces

2012 ◽  
Vol 370 (1963) ◽  
pp. 1337-1351 ◽  
Author(s):  
Kathryn Grandfield ◽  
Anders Palmquist ◽  
Håkan Engqvist
Keyword(s):  
High Resolution ◽  
Electron Tomography ◽  
Three Dimensional ◽  
Controlled Drug Release ◽  
Biological Tissues ◽  
Dimensional Structure ◽  
Bone Interface ◽  
Biomaterial Interfaces ◽  
Titania Coating

Interfacial relationships between biomaterials and tissues strongly influence the success of implant materials and their long-term functionality. Owing to the inhomogeneity of biological tissues at an interface, in particular bone tissue, two-dimensional images often lack detail on the interfacial morphological complexity. Furthermore, the increasing use of nanotechnology in the design and production of biomaterials demands characterization techniques on a similar length scale. Electron tomography (ET) can meet these challenges by enabling high-resolution three-dimensional imaging of biomaterial interfaces. In this article, we review the fundamentals of ET and highlight its recent applications in probing the three-dimensional structure of bioceramics and their interfaces, with particular focus on the hydroxyapatite–bone interface, titanium dioxide–bone interface and a mesoporous titania coating for controlled drug release.

scholarly journals Probing nanoscale behavior of magnetic materials with soft X-ray spectromicroscopy

2012 ◽  
Vol 1 (1) ◽  
pp. 5-15 ◽  
Author(s):  
Peter Fischer ◽  
Charles S. Fadley
Keyword(s):  
Magnetic Properties ◽  
Magnetic Materials ◽  
Spin Dynamics ◽  
Magnetic Nanostructures ◽  
Magnetic Behavior ◽  
Research Area ◽  
X Ray ◽  
Spatially Resolved ◽  
Buried Interfaces ◽  
Analytical Tools

AbstractThe magnetic properties of matter continue to be a vibrant research area driven both by scientific curiosity to unravel the basic physical processes which govern magnetism and the vast and diverse utilization of magnetic materials in current and future devices, e.g., in information and sensor technologies. Relevant length and time scales approach fundamental limits of magnetism and with state-of-the-art synthesis approaches we are able to create and tailor unprecedented properties. Novel analytical tools are required to match these advances and soft X-ray probes are among the most promising ones. Strong and element-specific magnetic X-ray dichroism effects as well as the nanometer wavelength of photons and the availability of fsec short and intense X-ray pulses at upcoming X-ray sources enable unique experimental opportunities for the study of magnetic behavior. This article provides an overview of recent achievements and future perspectives in magnetic soft X-ray spectromicroscopies which permit us to gain spatially resolved insight into the ultrafast spin dynamics and the magnetic properties of buried interfaces of advanced magnetic nanostructures.

scholarly journals Prospects of Nanostructure-Based Solar Cells for Manufacturing Future Generations of Photovoltaic Modules

2009 ◽  
Vol 2009 ◽  
pp. 1-13 ◽  
Author(s):  
N. Gupta ◽  
G. F. Alapatt ◽  
R. Podila ◽  
R. Singh ◽  
K. F. Poole
Keyword(s):  
Solar Cells ◽  
Heat Dissipation ◽  
Driving Forces ◽  
Three Dimensional ◽  
Solar Spectrum ◽  
Future Generation ◽  
Theoretical Work ◽  
Future Generations ◽  
Pv Modules ◽  
Quantum Phenomena

We present a comprehensive review on prospects for one-, two-, or three-dimensional nanostructure-based solar cells for manufacturing the future generation of photovoltaic (PV) modules. Reducing heat dissipation and utilizing the unabsorbed part of the solar spectrum are the key driving forces for the development of nanostructure-based solar cells. Unrealistic assumptions involved in theoretical work and the tendency of stretching observed experimental results are the primary reasons why quantum phenomena-based nanostructures solar cells are unlikely to play a significant role in the manufacturing of future generations of PV modules. Similar to the invention of phase shift masks (to beat the conventional diffraction limit of optical lithography) clever design concepts need to be invented to take advantage of quantum-based nanostructures. Silicon-based PV manufacturing will continue to provide sustained growth of the PV industry.

Sign in / Sign up

Export Citation Format

Share Document