scholarly journals Collapse Mechanism of Single-Layer Cylindrical Latticed Shell under Severe Earthquake

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2519
Author(s):  
Haitao Zhou ◽  
Yigang Zhang ◽  
Feng Fu ◽  
Jinzhi Wu
Keyword(s):  
Finite Element ◽  
Single Layer ◽  
Element Model ◽  
Failure Criteria ◽  
Collapse Mechanism ◽  
Structural Members ◽  
Ground Acceleration ◽  
Beam Elements ◽  
Stress And Deformation ◽  
Theory Of Damage

In this paper, the results of finite element analyses of a single-layer cylindrical latticed shell under severe earthquake are presented. A 3D Finite Element model using fiber beam elements is used to investigate the collapse mechanism of this type of shell. The failure criteria of structural members are simulated based on the theory of damage accumulation. Severe earthquakes with peak ground acceleration (PGA) values of 0.5 g are applied to the shell. The stress and deformation of the shell are studied in detail. A three-stage collapse mechanism “double-diagonal -members-failure-belt” of this type of structure is discovered. Based on the analysis results, measures to mitigate the collapse of this type of structure are recommended.

scholarly journals Collapse Mechanism of Single-Layer Cylindrical Latticed Shell Under Severe Earthquake

2020 ◽  
Author(s):  
Haitao Zhou ◽  
Yigang Zhang ◽  
Feng Fu ◽  
Jinzhi Wu
Keyword(s):  
Finite Element ◽  
Single Layer ◽  
Element Model ◽  
Failure Criteria ◽  
Collapse Mechanism ◽  
Structural Members ◽  
Ground Acceleration ◽  
Beam Elements ◽  
Three Stages ◽  
Theory Of Damage

In this paper, the results of finite element analyses of a single-layer cylindrical latticed shell under severe earthquake is presented. A 3D Finite Element model using fiber beam elements were used to investigate the collapse mechanism of this type of shell. The failure criteria of structural members are simulated based on the theory of damage accumulation. Severe earthquake of peak ground acceleration (PGA) of 500 gal was applied to the shell. The stress and defeomation of the shell were studied in detail. A three-stages collapse mechanism “double-diagonal -members-failure-belt” of this type of structure was discovered. Based on the analysis results, the measures to mitigate collapse of this type of structure is recomanded.

A Simplified Finite Element for Added Mass and Inertial Coupling in Arrays of Cylinders

1985 ◽  
Vol 107 (2) ◽  
pp. 118-125 ◽  
Author(s):  
R. E. Harris ◽  
M. A. Dokainish ◽  
D. S. Weaver
Keyword(s):  
Finite Element ◽  
Time Integration ◽  
Element Model ◽  
Added Mass ◽  
Cylindrical Structures ◽  
Beam Elements ◽  
Inertial Coupling ◽  
Fundamental Frequencies ◽  
Tube Bundles ◽  
Primary Advantage

A simplified finite element has been developed for modeling the added mass and inertial coupling arising when clusters of cylinders vibrate in a quiescent fluid. The element, which is based on two-dimensional potential flow theory, directly couples two adjacent beam elements representing portions of the adjacent cylindrical structures. The primary advantage of this approach over existing methods is that it does not require the discretization of the surrounding fluid and, therefore, is computationally much more efficient. The fundamental frequencies of tube bundles of various pitch ratios have been predicted using this method and compared with experimental data. Generally, the agreement is good, especially for the bandwidth of fluid coupled natural frequencies. The transient response of tube bundles is also examined using time integration of the finite element model. The beating phenomenon and time decay characteristics exhibited by the experimental bundles under single-tube excitation are well predicted and valuable insights are gained into the measurement of damping in tube bundles.

Perforation mechanics of UHMWPE soft ballistic sub-laminate and soft ballistic armor pack: A finite element study

2021 ◽  
pp. 089270572110420
Author(s):  
Bazle Z (Gama) Haque ◽  
John W Gillespie
Keyword(s):  
Finite Element ◽  
Single Layer ◽  
Areal Density ◽  
Element Model ◽  
Transverse Impact ◽  
Free Standing ◽  
Uhmwpe Fibers ◽  
Ballistic Limit Velocity ◽  
Definition Of ◽  
First Time

Soft-ballistic sub-laminate (SBSL) made from ultra-high molecular weight polyethylene (UHMWPE) fibers in [0/90] stacking sequence are the building block of a multi-layer soft-ballistic armor pack (SBAP, aka Soft Armor). A systematic study of the perforation dynamics of a single layer SBSL and several multi-layer SBAPs (2, 3, 4, 8, 16, 24, 32 layers) is presented for the first time in the literature. A previously validated finite element model of transverse impact on a single layer is used to study the perforation mechanics of multi-layer SBAPs with friction between individual layers. Following the classical definition of ballistic limit velocity, a minimum perforation velocity has been determined for free-standing single layer SBSL and multi-layer SBAPs. For the multi-layer SBAPs, complete perforations have been identified as progressive perforation of individual layers through the thickness. The minimum perforation velocities of multi-layer SBAPS is linear with the areal density for the eight (8) layer target and thicker. Large deformation behavior and perforation mechanics of the SBAPs is discussed in detail.

Finite Element Modeling of Unidirectional Non-Crimp Fabric for Manufacturing of Composites with Embedded Cabling

2013 ◽  
Vol 554-557 ◽  
pp. 484-491 ◽  
Author(s):  
Alexander S. Petrov ◽  
James A. Sherwood ◽  
Konstantine A. Fetfatsidis ◽  
Cynthia J. Mitchell
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Explicit Finite Element ◽  
Shell Elements ◽  
Beam Elements ◽  
Hybrid Finite Element ◽  
International Benchmarking ◽  
Unidirectional Glass ◽  
Forming Simulations

A hybrid finite element discrete mesoscopic approach is used to model the forming of composite parts using a unidirectional glass prepreg non-crimp fabric (NCF). The tensile behavior of the fabric is represented using 1-D beam elements, and the shearing behavior is captured using 2-D shell elements into an ABAQUS/Explicit finite element model via a user-defined material subroutine. The forming of a hemisphere is simulated using a finite element model of the fabric, and the results are compared to a thermostamped part as a demonstration of the capabilities of the used methodology. Forming simulations using a double-dome geometry, which has been used in an international benchmarking program, were then performed with the validated finite element model to explore the ability of the unidirectional fabric to accommodate the presence of interlaminate cabling.

scholarly journals Comparative Analysis of Static Loading Performance of Rigid and Flexible Road Wheel based on Finite Element Method

2020 ◽  
Vol 70 (1) ◽  
pp. 41-46
Author(s):  
Yaoji Deng ◽  
Youqun Zhao ◽  
Mingmin Zhu ◽  
Zhen Xiao ◽  
Qiuwei Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Static Loading ◽  
Maximum Stress ◽  
Three Dimensional ◽  
Element Model ◽  
Vertical Load ◽  
New Type ◽  
Stress And Deformation ◽  
Nonlinear Finite Element Model

To overcome the shortcomings of traditional rigid road wheel, such as poor damping effect and low load-bearing efficiency, a new type of flexible road wheel, having a unique suspension-bearing mode, was introduced. The three-dimensional nonlinear finite element model of rigid and flexible road wheel, considering the triple nonlinear characteristics of geometry, material and contact, is established for numerical investigation of static loading performance. The accuracy of the finite element model of the rigid and flexible road wheel is verified by static loading experiment. The static loading performance of the rigid and flexible road wheels is numerically analyzed. The influence of vertical load on maximum stress and deformation of the rigid and flexible wheels is also studied. The results show that the contact pressure uniformity of the flexible road wheel is better than that of the rigid road wheel under the static vertical load, but the maximum stress and deformation of the flexible road wheel are greater than that of the rigid road wheel. However, this problem can be solved by increasing the number of hinge sets and optimising the joints. The research results provide theoretical basis for replacing rigid road wheel with flexible road wheel, and also provide reference for structural optimisation of flexible road wheel.

Buckling of sandwich panels with transversely flexible core: Correction of the equivalent single-layer model using thick-faces effect

2018 ◽  
Vol 22 (5) ◽  
pp. 1612-1634 ◽  
Author(s):  
J Jelovica ◽  
J Romanoff
Keyword(s):  
Finite Element ◽  
Transverse Shear ◽  
Sandwich Panels ◽  
Shear Deformation Theory ◽  
Single Layer ◽  
Element Model ◽  
Layer Model ◽  
The Core ◽  
Truss Core ◽  
Single Layer Model

Modeling a periodic structure as a homogeneous continuum allows for an effective structural analysis. This approach represents a sandwich panel as a two-dimensional plate of equivalent stiffness. Known as the equivalent single-layer, the method is used here to analyze bifurcation buckling of three types of sandwich panels with unidirectional stiffeners in the core: truss-core, web-core and corrugated-core panels made of an isotropic material. The transverse shear stiffnesses of these panels can differ by several orders of magnitude, which cause incorrect buckling analysis when using the equivalent single-layer model with the first-order shear deformation theory. Analytical solution of the problem predicts critical buckling loads that feature infinite number of half-waves in the direction perpendicular to the stiffeners. Finite element model also predicts buckling modes that have non-physical, saw-tooth shape with infinite curvature at nodes. However, such unrealistic behavior is not observed when using detailed three-dimensional finite element models. The error in the prediction of the critical buckling load is up to 85% for the cases considered here. The correction of the equivalent single-layer model is proposed by modeling the thick-faces effect to ensure finite curvature. This is performed in the finite element setting by introducing an additional plate with tied deflections to the equivalent single-layer plate. The extra plate is represented with bending and transverse shear stiffness of the face plates. As a result, global buckling is predicted accurately. Guidelines are proposed to identify the sandwich panels where ordinary model is incorrect. Truss-core and web-core sandwich panels need the correction. Corrugated-core panels without a gap between plates in the core have smaller shear orthotropy and do not need the correction. Modeling the thick-faces effect ensures correct results for all cases considered in this study, and thus one should resort to this approach in case of uncertainty whether the ordinary equivalent single-layer model is valid.

The Finite Element Analysis of a Heavy Semi-Trailer Frame Based on ANSYS

2014 ◽  
Vol 644-650 ◽  
pp. 455-458
Author(s):  
Yao Ye ◽  
Yong Hai Wu
Keyword(s):  
Finite Element ◽  
Geometric Model ◽  
Reference Method ◽  
Element Model ◽  
Element Analysis ◽  
Emergency Braking ◽  
The Finite Element Analysis ◽  
New Type ◽  
Stress And Deformation ◽  
3D Geometric Model

Frame has important effects on the performance of the whole of heavy semi-trailer. A heavy semi-trailer frame is analyzed and researched on in the finite-element way in this article. The frame of 3D geometric model is established by using Pro/E. And it was imported into the Hypermesh to establish frame finite element model. Frame are calculated by using ANSYS solver in bending condition, emergency braking conditions and rapid turn conditions of stress and deformation conditions. The computational tools and methods we used provide the new type of frame and development with a reference method to refer to in this paper.

Finite Element Analysis of X-Cor Sandwich's Compressive Strength

2011 ◽  
Vol 306-307 ◽  
pp. 733-737
Author(s):  
Xu Dan Dang ◽  
Xin Li Wang ◽  
Hong Song Zhang ◽  
Jun Xiao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Compressive Strength ◽  
Failure Modes ◽  
Failure Mechanisms ◽  
Element Model ◽  
Failure Criteria ◽  
Stiffness Degradation ◽  
Element Analysis ◽  
Finite Element Software

In this article the finite element software was used to analyse the values for compressive strength of X-cor sandwich. During the analysis, the failure criteria and materials stiffness degradation rules of failure mechanisms were proposed. The failure processes and failure modes were also clarified. In the finite element model we used the distributions of failure elements to simulate the failure processes. Meanwhile the failure mechanisms of X-cor sandwich were explained. The finite element analysis indicates that the resin regions of Z-pin tips fail firstly and the Z-pins fail secondly. The dominant failure mode is the Z-pin elastic buckling and the propagation paths of failure elements are dispersive. Through contrast the finite element values and test results are consistent well and the error range is -7.6%~9.5%. Therefore the failure criteria and stiffness degradation rules are reasonable and the model can be used to predict the compressive strength of X-cor sandwich.

Support-Condition Analyses of Rotating Beams Under Distributed Imbalance Loading

2011 ◽  
Author(s):  
Kai Jokinen ◽  
Erno Keskinen ◽  
Marko Jorkama ◽  
Wolfgang Seemann
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Cross Section ◽  
Cross Sections ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Constant Cross Section ◽  
Support Condition ◽  
Beam Elements

In roll balancing the behaviour of the roll can be studied either experimentally with trial weights or, if the roll dimensions are known, analytically by forming a model of the roll to solve response to imbalance. Essential focus in roll balancing is to find the correct amount and placing for the balancing mass or masses. If this selection is done analytically the roll model used in calculations has significant effect to the balancing result. In this paper three different analytic methods are compared. In first method the mode shapes of the roll are defined piece wisely. The roll is divided in to five parts having different cross sections, two shafts, two roll ends and a shell tube of the roll. Two boundary conditions are found for both supports of the roll and four combining equations are written to the interfaces of different roll parts. Totally 20 equations are established to solve the natural frequencies and to form the mode shapes of the non-uniform roll. In second model the flexibility of shafts and the stiffness of the roll ends are added to the support stiffness as serial springs and the roll is modelled as a one flexibly supported beam having constant cross section. Finally the responses to imbalance of previous models are compared to finite element model using beam elements. Benefits and limitations of each three model are then discussed.

scholarly journals Analysis of Stress Deformation Characteristics of Composite Geomembrane Rock-Fill Dam with Core Wall

2013 ◽  
Vol 470 ◽  
pp. 962-965
Author(s):  
Dong Yan Ding ◽  
Jian Min Ren
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Elastic Model ◽  
Deformation Characteristics ◽  
Distribution Rule ◽  
Dimensional Finite Element ◽  
Stress And Deformation ◽  
Three Dimensional Finite Element ◽  
Nonlinear Elastic

The Chengzigou hydropower station of composite geomembrane rockfill dam as an example of the dam body and the composite geotechnical membrane stress and deformation characteristics are used nonlinear elastic model - Duncan EB model establish three-dimensional finite element model of rockfill,by using the large finite element softwareFLAC3D,whice provided geogrid element to simulate lexible geomembrane shear interaction with soil.The stress and deformation of the dam and the composite geomembrane is calculated under two conditionscompletion period and impoundment period.And analyze the change of the stress and strain distribution rule,whice will provide the basis for the design of the geomembrane.

Sign in / Sign up

Export Citation Format

Share Document