scholarly journals Influence of Morphology on the Healing Mechanism of PCL/Epoxy Blends

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1941 ◽  
Author(s):  
Alberto Jiménez-Suárez ◽  
Gilberto Del Rosario ◽  
Xoan Xosé Sánchez-Romate ◽  
Silvia González Prolongo
Keyword(s):  
Epoxy Matrix ◽  
Surface Damage ◽  
The Self ◽  
Maximum Efficiency ◽  
Initial Surface ◽  
Self Healing ◽  
Blend Morphology ◽  
Healing Efficiency ◽  
Healing Agent ◽  
Epoxy Blends

Polycaprolactone (PCL) is being researched as a self-healing agent blended with epoxy resins by several reasons: low melting point, differential expansive bleeding (DBE) of PCL, and reaction induced phase separation (RIPS) of PCL/epoxy blends. In this work, PCL/epoxy blends were prepared with different PCL ratios and two different epoxy networks, cured with aliphatic and aromatic amine hardeners. The curing kinetic affects to the blend morphology, varying its critical composition. The self-healing behavior is strongly affected by the blend morphology, reaching the maximum efficiency for co-continuous phases. Blends with dispersed PCL phase into epoxy matrix can also show high self-healing efficiency because of the low PCL domains that act as reservoir of self-healing agent. In this last case, it was confirmed that the most efficient self-healable blends are one whose area occupied by PCL phase is the largest. These blends remain the good thermal and mechanical behavior of epoxy matrix, in contrast to the worsened properties of blends with bicontinuous morphology. In this work, the self-healing mechanism of blends is studied in depth by scanning electron microscopy. Furthermore, the influence of the geometry of the initial surface damage is also evaluated, affecting to the measurement of self-healing efficiency.

Preparation and Performance of Self-Healing Epoxy Composites by Microcapsulated Approach

2014 ◽  
Vol 636 ◽  
pp. 73-77 ◽  
Author(s):  
Xin Hua Yuan ◽  
Qiu Su ◽  
Li Yin Han ◽  
Qian Zhang ◽  
Yan Qiu Chen ◽  
...  
Keyword(s):  
Impact Strength ◽  
Epoxy Matrix ◽  
The Self ◽  
Epoxy Composites ◽  
Fracture Plane ◽  
Crack Plane ◽  
Curing Agent ◽  
Self Healing ◽  
Healing Agent ◽  
The Impact

Microencapsulated E-51 epoxy resin healing agent and phthalic anhydride latent curing agent were incorporated into E-44 epoxy matrix to prepare self-healing epoxy composites. When cracks were initiated or propagated in the composites, the microcapsules would be damaged and the healing agent released. As a result, the crack plane was healed through curing reaction of the released epoxy latent curing agent. In the paper, PUF/E-51 microcapsules were prepared by in-situ polymerization. The mechanical properties of the epoxy composites filled with the self-healing system were evaluated. The impact strength and self-healing efficiency of the composites are measured using a Charpy Impact Tester. Both the virgin and healed impact strength depends strongly on the concentration of microcapsules added into the epoxy matrix. Fracture of the neat epoxy is brittle, exhibiting a mirror fracture surface. Addition of PUF/E-51 microcapsules decreases the impact strength and induces a change in the fracture plane morphology to hackle markings. In the case of 8.0 wt% microcapsules and 3.0 wt% latent hardener, the self-healing epoxy exhibited 81.5% recovery of its original fracture toughness.

scholarly journals Performance of Self-Healing Cementitious Composites Using Aligned Tubular Healing Fiber

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6162
Author(s):  
Ru Mu ◽  
Dogniman Landry Soro ◽  
Xiaowei Wang ◽  
Longbang Qing ◽  
Guorui Cao ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Steel Fibers ◽  
The Self ◽  
Self Healing ◽  
Cementitious Composite ◽  
Hybrid Fiber ◽  
Healing Efficiency ◽  
Healing Agent ◽  
Splitting Tensile Test ◽  
Better Than

From the perspective of improving the self-healing method in construction, a tubular healing fiber was adopted as a container to improve the encapsulation capacity, which was available using a micro-capsule as a container. Knowing the direction of the stresses to which structure members are subjected, this research investigated the influence of aligning tubular healing fibers parallel to intended stress into a cementitious composite to increase the self-healing capability. For that, a healing agent was encapsulated into a tubular healing fiber made with polyvinylidene of fluoride resin (PVDF). Then, the healing fiber was combined with steel fibers to align both fibers together parallel to the direction of an intended splitting tensile stress when subjected to a magnetic field in a cylindrical cementitious composite. The alignment method and the key point through which the alignment of the healing fibers could efficiently improve autonomic self-healing were investigated. Since the magnetic field is known to be able to drag steel to an expected direction, steel fibers were combined with the healing fibers to form a hybrid fiber that aligned both fibers together. The required mixture workability was investigated to avoid the sinking of the healing fibers into the mixture. The healing efficiency, according to the orientation of the healing fibers in the composite matrix, was evaluated through a permeability test and a repetitive splitting tensile test. The aligned healing fibers performed better than the randomly distributed healing fibers. However, according to the healing efficiency with aligned healing fibers, it was deduced that the observed decreasing effect of the container’s alignment on the specimen’s mechanical properties was low enough to be neglected.

scholarly journals Sugarcane Bagasse-Derived Activated Carbon- (AC-) Epoxy Vitrimer Biocomposite: Thermomechanical and Self-Healing Performance

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Balaji Krishnakumar ◽  
Debajyoti Bose ◽  
Manjeet Singh ◽  
R. V. Siva Prasanna Sanka ◽  
Velidi V. S. S. Gurunadh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Epoxy Matrix ◽  
The Self ◽  
Self Healing ◽  
Thermal And Mechanical Properties ◽  
Healing Efficiency ◽  
Sustainable Materials ◽  
Lower Temperature

Vitrimeric materials have emerged as fascinating and sustainable materials owing to their malleability, reprocessability, and recyclability. Sustainable vitrimeric materials can be prepared by reinforcing polymeric matrix with bioderived fillers. In the current work, a sustainable vitrimer is prepared by incorporating biomass-derived activated carbon (AC) filler into the epoxy matrix to achieve enhanced thermal and mechanical properties. Thus, prepared biocomposite vitrimers demonstrate a lower-temperature self-healing (70°C for 5 min) via disulfide exchanges, compared to the pristine epoxy vitrimers (80°C for 5 min). Significantly, the self-healing performances have been studied extensively with the flexural studies; and changes in material healing efficiency have been demonstrated based on the observed changes in modulus.

A MICROCAPSULE TECHNOLOGY BASED SELF-HEALING SYSTEM FOR CONCRETE STRUCTURES

2013 ◽  
Vol 07 (03) ◽  
pp. 1350014 ◽  
Author(s):  
BIQIN DONG ◽  
NINGXU HAN ◽  
MING ZHANG ◽  
XIANFENG WANG ◽  
HONGZHI CUI ◽  
...  
Keyword(s):  
Urea Formaldehyde ◽  
Concrete Structures ◽  
The Self ◽  
Polymerization Reaction ◽  
Formaldehyde Resin ◽  
Self Healing ◽  
Cementitious Composite ◽  
Healing System ◽  
Healing Efficiency ◽  
Healing Agent

In the study, a novel microcapsule technology based self-healing system for concrete structures has been developed. Through situ-polymerization reaction, the microcapsule is formed by urea formaldehyde resin to pack the epoxy material, which is applied to cementitious composite to achieve self-healing effect. The experimental results revealed that the self-healing efficiency of the composite can be accessed from the recovery of the permeability and strength for the cracked cementitious specimens as the healing agent in the microcapsule acting on the cracks directly. Scanning electronic microscope (SEM/EDX) results show that the epoxy resin is released along with the cracking of the cementitious composite and prevent from cracks continued growth. Further studies show that the self-healing efficiency is affected by the pre-loading of composite, particle size of microcapsule, aging duration of healing agent and so on.

Mechanical responses of microencapsulated self-healing cementitious composites under compressive loading based on a micromechanical damage-healing model

2021 ◽  
pp. 105678952110112
Author(s):  
Kaihang Han ◽  
Jiann-Wen Woody Ju ◽  
Yinghui Zhu ◽  
Hao Zhang ◽  
Tien-Shu Chang ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Micromechanical Model ◽  
Cementitious Composites ◽  
Self Healing ◽  
Damage Degree ◽  
Healing Efficiency ◽  
The Matrix ◽  
Healing Agent ◽  
Damage Healing

The cementitious composites with microencapsulated healing agents have become a class of hotspots in the field of construction materials, and they have very broad application prospects and research values. The in-depth study on multi-scale mechanical behaviors of microencapsulated self-healing cementitious composites is critical to quantitatively account for the mechanical response during the damage-healing process. This paper proposes a three-dimensional evolutionary micromechanical model to quantitatively explain the self-healing effects of microencapsulated healing agents on the damage induced by microcracks. By virtue of the proposed 3 D micromechanical model, the evolutionary domains of microcrack growth (DMG) and corresponding compliances of the initial, extended and repaired phases are obtained. Moreover, the elaborate studies are conducted to inspect the effects of various system parameters involving the healing efficiency, fracture toughness and preloading-induced damage degrees on the compliances and stress-strain relations. The results indicate that relatively significant healing efficiency, preloading-induced damage degree and the fracture toughness of polymerized healing agent with the matrix will lead to a higher compressive strength and stiffness. However, the specimen will break owing to the nucleated microcracks rather than the repaired kinked microcracks. Further, excessive higher values of healing efficiency, preloading-induced damage degree and the fracture toughness of polymerized healing agent with the matrix will not affect the compressive strength of the cementitious composites. Therefore, a stronger matrix is required. To achieve the desired healing effects, the specific parameters of both the matrix and microcapsules should be selected prudently.

Effect of Using Magnesium Acetate on the Self-Healing Efficiency of Hydrogel-Encapsulated Bacteria in Concrete

2021 ◽  
Author(s):  
Ricardo Hungria ◽  
Momen Mousa ◽  
Marwa Hassan ◽  
Omar Omar ◽  
Andrea Gavilanes ◽  
...  
Keyword(s):  
The Self ◽  
Magnesium Acetate ◽  
Self Healing ◽  
Healing Efficiency ◽  
Encapsulated Bacteria

scholarly journals Design of self-healing catalysts for aircraft application

2018 ◽  
Vol 9 (6) ◽  
pp. 723-736 ◽  
Author(s):  
Elisa Calabrese ◽  
Pasquale Longo ◽  
Carlo Naddeo ◽  
Annaluisa Mariconda ◽  
Luigi Vertuccio ◽  
...  
Keyword(s):  
Ruthenium Catalysts ◽  
The Self ◽  
Self Healing ◽  
Catalytic Systems ◽  
Content Type ◽  
Aerospace Applications ◽  
Healing Efficiency ◽  
Relevant Role ◽  
Aircraft Application

PurposeThe purpose of this paper is to highlight the relevant role of the stereochemistry of two Ruthenium catalysts on the self-healing efficiency of aeronautical resins.Design/methodology/approachHere, a very detailed evaluation on the stereochemistry of two new ruthenium catalysts evidences the crucial role of the spatial orientation of phenyl groups in the N-heterocyclic carbene ligands in determining the temperature range within the curing cycles is feasible without deactivating the self-healing mechanisms (ring-opening metathesis polymerization reactions) inside the thermosetting resin. The exceptional activity and thermal stability of the HG2MesPhSyncatalyst, with the syn orientation of phenyl groups, highlight the relevant potentiality and the future perspectives of this complex for the activation of the self-healing function in aeronautical resins.FindingsThe HG2MesPhSyncomplex, with the syn orientation of the phenyl groups, is able to activate metathesis reactions within the highly reactive environment of the epoxy thermosetting resins, cured up to 180°C, while the other stereoisomer, with the anti-orientation of the phenyl groups, does not preserve its catalytic activity in these conditions.Originality/valueIn this paper, a comparison between the self-healing functionality of two catalytic systems has been performed, using metathesis tests and FTIR spectroscopy. In the field of the design of catalytic systems for self-healing structural materials, a very relevant result has been found: a slight difference in the molecular stereochemistry plays a key role in the development of self-healing materials for aeronautical and aerospace applications.

Advanced Fiber Reinforced Self-Healing Ceramics for Middle Range Temperature

2019 ◽  
Vol 810 ◽  
pp. 119-124
Author(s):  
Wataru Nakao ◽  
Taira Hayakawa ◽  
Tesuro Yanaseko ◽  
Shingo Ozaki
Keyword(s):  
Low Temperature ◽  
Turbine Blade ◽  
The Self ◽  
Self Healing ◽  
Fiber Reinforced ◽  
Low Pressure Turbine ◽  
Middle Range ◽  
The Matrix ◽  
Healing Agent ◽  
Technical Issues

The availability of TiC healing agent has been evaluated in low temperature self-healing behavior of Al2O3 based self-healing ceramics. For this purpose, some technical issues to actualize the advanced fiber-reinforced self-healing ceramics containing TiC based interlayer as healing agent were discussed. Especially, the mechanical matching between the matrix and the interlayer was focused. Moreover, the self-healing behavior of the advanced shFRC containing the optimized TiC based healing agent was investigated. As a result, 30 vol% TiC-70 vol% Al2O3 interlayer was confirmed to be the optimized healing agent in the self-healing ceramics, and the self-healing ceramics was found to enable to attain the perfect healing at 600°C within 10 min. And we succeeded in prototype production of fiber-reinforced self-healing ceramics for low pressure turbine blade.

Sign in / Sign up

Export Citation Format

Share Document