scholarly journals On the Influence of Corrosion on the Load-Carrying Capacity of Old Riveted Bridges

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 717
Author(s):  
Jozef Gocál ◽  
Jaroslav Odrobiňák
Keyword(s):  
Carrying Capacity ◽  
Steel Corrosion ◽  
Transport Infrastructure ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Bridge Structures ◽  
Capacity Calculation ◽  
Existing Bridges ◽  
The Impact ◽  
Bridge Substructures

Steel corrosion is one of the most dominant factors in the degradation of transport infrastructure. This article deals with the impact of the atmospheric corrosion of structural steel on the load-carrying capacity of old riveted bridge structures. A study on the impact of corrosion losses on the resistance and, thus, the load-carrying capacity of eight chosen bridge members with riveted I-sections from three different bridge substructures is presented. The load-carrying capacity calculation is carried out using modern procedures and on the basis of the diagnosed state of the structural elements. Within the analysis of the results, the need for long-term in situ corrosion measurements, as well as the need for regular inspections on the existing bridges are also discussed.

scholarly journals Quantifying the Impact of Mounted Load Carrying on Equids: A Review

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1333
Author(s):  
Syed S. U. H. Bukhari ◽  
Alan G. McElligott ◽  
Rebecca S. V. Parkes
Keyword(s):  
Carrying Capacity ◽  
Creatine Kinase Activity ◽  
Serum Cortisol Level ◽  
Load Carrying Capacity ◽  
Gait Symmetry ◽  
Brick Kilns ◽  
Potential Marker ◽  
Load Carrying ◽  
The Impact ◽  
Working Equids

There are approximately 112 million working equids in developing countries, many of which are associated with brick kilns. Brick kilns and overloading are associated with welfare problems in working equids. Understanding equids’ abilities and influencing factors are important for both effective performance and welfare. Traditionally, measurement of the amount of ‘bone’ was used, and more recently, gait symmetry has been identified as a potential marker for loading capacity. Assessment of stride parameters and gait kinematics provides insights into adaptations to loading and may help determine cut-off loads. Physiological factors such as the ability to regain normal heart rates shortly after work is an important tool for equine fitness assessment and a more accurate measure of load-carrying capacity than absolute heart rate. Oxidative stress, plasma lactate, and serum creatine kinase activity are reliable biochemical indicators of loading ability. For monitoring stress, salivary cortisol is superior to serum cortisol level for assessment of hypothalamus-pituitary-adrenal axis and is related to eye temperatures, but this has yet to be interpreted in terms of load-carrying ability in equids. Further research is needed to standardize the evidence-based load-carrying capacity of working horses and donkeys.

scholarly journals Existing Steel Railway Bridges Evaluation

2016 ◽  
Vol 12 (2) ◽  
pp. 103-110 ◽  
Author(s):  
Josef Vičan ◽  
Jozef Gocál ◽  
Jaroslav Odrobiňák ◽  
Peter Koteš
Keyword(s):  
Carrying Capacity ◽  
Global Analysis ◽  
Evaluation Process ◽  
Steel Bridge ◽  
Load Carrying Capacity ◽  
Railway Bridges ◽  
Load Carrying ◽  
Bridge Superstructure ◽  
Existing Bridges ◽  
Capacity Determination

Abstract The article describes general principles and basis of evaluation of existing railway bridges based on the concept of load-carrying capacity determination. Compared to the design of a new bridge, the modified reliability level for existing bridges evaluation should be considered due to implementation of the additional data related to bridge condition and behaviour obtained from regular inspections. Based on those data respecting the bridge remaining lifetime, a modification of partial safety factors for actions and materials could be respected in the bridge evaluation process. A great attention is also paid to the specific problems of determination of load-caring capacity of steel railway bridges in service. Recommendation for global analysis and methodology for existing steel bridge superstructure load-carrying capacity determination are described too.

scholarly journals A STUDY OF FERROFLUID LUBRICATION BASED ROUGH SINE FILM SLIDER BEARING WITH ASSORTED POROUS STRUCTURE

2019 ◽  
Vol 59 (2) ◽  
pp. 144-152
Author(s):  
Mohmmadraiyan M. Munshi ◽  
Ashok R. Patel ◽  
Gunamani B. Deheri
Keyword(s):  
Porous Structure ◽  
Carrying Capacity ◽  
Graphical Representation ◽  
Negative Impact ◽  
Positive Impact ◽  
Numerical Approach ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Load Carrying ◽  
The Impact

This paper attempts to study a ferrofluid lubrication based rough sine film slider bearing with assorted porous structure using a numerical approach. The fluid flow of the system is regulated by the Neuringer-Rosensweig model. The impact of the transverse surface roughness of the system has been derived using the Christensen and Tonder model. The corresponding Reynolds’ equation has been used to calculate the pressure distribution which, in turn, has been the key to formulate the load carrying capacity equation. A graphical representation is made to demonstrate the calculated value of the load carrying capacity which is a dimensionless unit. The numbers thus derived have been used to prove that ferrofluid lubrication aids the load carrying capacity. The study suggests that the positive impact created by magnetization in the case of negatively skewed roughness helps to partially nullify the negative impact of the transverse roughness. Further investigation implies that when the Kozeny-Carman’s model is used, the overall performance is enhanced. The Kozeny-Carman’s model is a form of an empirical equation used to calculate permeability that is dependent on various parameters like pore shape, turtuosity, specific surface area and porosity. The success of the model can be accredited to its simplicity and efficiency to describe measured permeability values. The obtained equation was used to predict the permeability of fibre mat systems and of vesicular rocks.

Evaluation of Load Carrying Capacity of the Perforated Shear Connector with Flange Heads

2006 ◽  
Vol 326-328 ◽  
pp. 1811-1816 ◽  
Author(s):  
Young Ho Kim ◽  
Jae Ho Jung ◽  
Soon Jong Yoon ◽  
Won Sup Jang
Keyword(s):  
Carrying Capacity ◽  
Load Transfer ◽  
Shear Capacity ◽  
Load Carrying Capacity ◽  
Shear Connector ◽  
Shear Connectors ◽  
Load Carrying ◽  
Bridge Structures ◽  
Composite Bridge ◽  
New Type

In the construction of composite bridge structures, various types of shear connectors are usually used to provide an efficient load transfer and the composite action of two or more different materials. In the previous work conducted by authors, a new type of the shear connector was introduced, which is the perforated shear connector with flange heads (T-shaped perforated shear connector), and the structural behavior of the shear connector was discussed based on the results of push-out tests. For the practical design of new shear connector, it is necessary to develop the equation for the prediction of the load carrying capacity of the shear connector. In this study, the existing design equations for the Perfobond shear connector were briefly analyzed and the equation for the prediction of the shear capacity of T-shaped perforated shear connector was suggested empirically. By comparing the results obtained by the suggested equation, the existing equations for the Perfobond shear connector, and the experiment, the applicability and effectiveness of the suggested equation was estimated.

High-Strength Concrete with Increased Fracture-Toughness

1990 ◽  
Vol 211 ◽  
Author(s):  
Mette Glavind ◽  
Tine Aarre
Keyword(s):  
Carrying Capacity ◽  
High Strength Concrete ◽  
High Strength ◽  
Load Carrying Capacity ◽  
Strength Concrete ◽  
Linear Load ◽  
Load Carrying ◽  
Capacity Calculation ◽  
Normal Strength ◽  
Non Linear Load

AbstractThe application of high-strength concrete in practice is strongly limited by its more brittle behaviour than normal strength concrete.The present study deals with an investigation of the possibilities of increasing the fracture toughness of high-strength concrete by adding fibres. Tests are made with both normal strength concrete and high-strength concrete containing different amounts of steel and polypropylene fibres. Stress-strain curves in compression are obtained by a deformation controlled test system. The toughness is described with different toughness indexes.By using a previously proposed expression for the stress-strain curves, it is possible to make a non-linear load carrying capacity calculation for reinforced concrete beams. The results of the load carrying capacity calculation are compared with results of similar calculations made with the Danish code extrapolated to be valid for high-strength concrete.The investigation shows that the addition of especially steel fibres is effective in increasing toughness and the non-linear load carrying capacity for high-strength concrete. It is also shown that the compression strength of high-strength concrete is increased by addition of steel fibres. The results of the load carrying capacity calculation show that the Danish code cannot be extrapolated to be valid for high-strength concrete without any modifications.

Load Carrying Capacity Calculation of Shear Wall with Concrete Filled Steel Tube Columns and Concealed Trusses

2013 ◽  
Vol 438-439 ◽  
pp. 706-710
Author(s):  
Ya Bin Yang ◽  
Wan Lin Cao
Keyword(s):  
Seismic Performance ◽  
Carrying Capacity ◽  
Shear Wall ◽  
Steel Tube ◽  
Load Carrying Capacity ◽  
Concrete Filled Steel Tube ◽  
Hysteretic Property ◽  
Load Carrying ◽  
Capacity Calculation ◽  
Steel Trusses

Shear wall with concrete filled steel tube columns and concealed trusses is a new kind of shear wall. In order to further the seismic performance of the new shear wall, experiment was carried on three 1/5 scale models, which included one traditional RC shear wall, one shear wall with concrete filled steel tube columns, one shear wall with concrete filled steel tube columns and concealed trusses. Based on the experimental study, load-carrying capacity and hysteretic property of each model were analyzed. The study show that the seismic performance of shear wall with concrete filled round steel tube columns and concealed steel trusses has high bearing capacity and good hysteretic property. Load carrying capacity calculation of shear wall with concrete filled steel tube columns and concealed steel trusses were carried out, the calculate results were in good agreement with the measured results.

Determination of Load-Carrying Capacity of Railway Steel and Concrete Composite Bridges

2016 ◽  
Vol 691 ◽  
pp. 172-184 ◽  
Author(s):  
Josef Vican ◽  
Jaroslav Odrobinak ◽  
Peter Kotes
Keyword(s):  
Carrying Capacity ◽  
Global Analysis ◽  
Evaluation Process ◽  
Load Carrying Capacity ◽  
Railway Bridges ◽  
Load Carrying ◽  
Composite Bridges ◽  
Existing Bridges ◽  
And Behavior

In the frame of global European standardization and in consequence of new knowledge related to existing bridges, the need for revision of the service handbook "Determination of load-carrying capacity of railway bridges" grown up. The paper presents general concepts and basic assumptions for determining the railway bridge load-carrying capacity. In contrast to design of a new bridge, additional data related to existing bridge condition and behavior like information from regular inspections and real state of degradation can be taken into account. Based on these data together with the remaining lifetime, a modification of reliability levels for existing bridges based on the mathematic theory of probability can be adopted in the evaluation process. Special attention is also paid to the specific features of determination of load caring capacity of steel-concrete composite bridges in exploitation. Recommendation and allowances for global analysis of existing composite steel and concrete superstructures for the purpose of the load-carrying capacity estimation are discussed as well.

scholarly journals Small Scale Experiments to Assess the Bearing Capacity of Footings on the Sloped Surface

Eng ◽  
2020 ◽  
Vol 1 (2) ◽  
pp. 240-248
Author(s):  
Mohammad Nurul Islam
Keyword(s):  
Bearing Capacity ◽  
Carrying Capacity ◽  
Maximum Load ◽  
Scale Model ◽  
Small Scale ◽  
Load Carrying Capacity ◽  
Engineering Structures ◽  
Load Carrying ◽  
Limiting Condition ◽  
The Impact

Construction of civil engineering structures on or next to a slope requires special attention to meet the bearing capacity requirements of soils. In this paper, to address such a challenge, we present laboratory-scale model tests to investigate the effect of footing shape on the sloped surface. The model comprised of a well stiffened mild steel box with three sides fixed and one side open. We considered both with and without reinforcement to assess the effectiveness of reinforcement on the sloped surface. Also, we used three types of footing (i.e., square, rectangular, and circular) to measure the footing shape effects. We considered three different slope angles to evaluate the impact of the sloped face corresponding to the applied load and the reinforcement application. We obtained that the maximum load carrying capacity in the square footing was higher than the rectangular and the circular footing for both the reinforced and the unreinforced soil. With the increase of geo-reinforcement in all three footing shapes and three sloped angles, the load carrying capacity increased. We also noticed a limiting condition in geo-reinforcement placement effectiveness. And we found that with the increase of slope, the load bearing capacity decreased. For a steep slope, the geo-reinforcement placement and the footing shape selection is crucial in achieving the external load sustainability, which we addressed herein.

Sign in / Sign up

Export Citation Format

Share Document