scholarly journals Effect of Hydrothermal (Sr)-Hydroxyapatite Coatings on the Corrosion Resistance and Mg2+ Ion Release to Enhance Osteoblastic Cell Responses of AZ91D Alloy

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 591 ◽  
Author(s):  
Chung-Wei Yang ◽  
Guan-Kai Wang
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Rate ◽  
Surface Topography ◽  
Contact Angles ◽  
The Body ◽  
Mg Alloy ◽  
Hydroxyapatite Coating ◽  
Control Group ◽  
Osteoblastic Cell ◽  
Static Contact

The biomedical applications of Mg-based alloys are limited by their rapid corrosion rate in the body fluid. In this study, the hydrothermal synthesis is employed to produce protective bioactive hydroxyapatite coating (HAC) and strontium-substituted hydroxyapatite coating (Sr-HAC) to further enhance the corrosion resistance and in vitro biocompatibility of biodegradable AZ91D Mg alloy in physiological environments. For comparison, the brucite Mg(OH)2 prepared by the alkaline pre-treatment is designated as a control group. Experimental evidences of XRD and XPS analysis confirm that Sr2+ ions can be incorporated into HA crystal structure. It is noted that the hydrothermally synthesized Sr-HAC conversion coating composed of a specific surface topography with the nanoscaled flake-like fine crystallites is constructed on the AZ91D Mg alloy. The hydrophilicity of Mg substrate is effectively enhanced with the decrease in static contact angles after performing alkaline and hydrothermal treatments. Potentiodynamic polarization measurements reveal that the nanostructured Sr-HAC-coated specimens exhibit superior corrosion resistance than HAC and alkaline pre-treated Mg(OH)2. Moreover, immersion tests demonstrate that Sr-HAC provides favorable long-term stability for the Mg alloy with decreasing concentration of released Mg2+ ions in the SBF and the reduced corrosion rate during the immersion length of 30 days. The cells cultured on Sr-HAC specimens exhibit higher viability than those on the alkaline-pre-treated Mg(OH)2 and HAC specimens. The Sr-substituted HA coating with a nanostructured surface topography can help to stimulate the cell viability of osteoblastic cells.

Corrosion Resistance of Mg Alloy with High Zn Concentration Including Impurity Cu

2021 ◽  
Vol 1016 ◽  
pp. 592-597
Author(s):  
Masato Ikoma ◽  
Taiki Morishige ◽  
Tetsuo Kikuchi ◽  
Ryuichi Yoshida ◽  
Toshihide Takenaka
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Rate ◽  
Mg Alloys ◽  
Mg Alloy ◽  
Second Phase ◽  
Transportation Industry ◽  
Primary Metal ◽  
Cu Content ◽  
Zn Concentration ◽  
Lower Corrosion Rate

Mg alloys are very attractive materials for transportation industry due to their toughness and lightness. Recycling Mg alloys is desired for energy saving that otherwise would be required to produce its primary metal. However, secondary produced Mg tends to contain a few impurity elements that deteriorate its corrosion resistance. For example, contamination of Mg alloy by Cu induces second phase of Mg2Cu and it works as strong cathode, resulting in the corrosion rate rapidly increasing. It was previously reported that the corrosion resistance of Mg with impurity Cu was remarkably improved by addition of alloying element Zn. Addition of Zn into Mg formed MgZn2 phase and incorporated Cu into MgZn2 phase instead of Mg2Cu formation. In this way, since Zn serves to improve the corrosion resistance of Mg, Mg alloy with high Zn concentration may form a lot of MgZn2 and may have better corrosion resistance even with high Cu concentration. In this work, the corrosion behavior of Mg-6mass%-1mass%Al (ZA61) with different Cu content up to 1mass% was investigated. As a result, ZA61-1.0Cu had much lower corrosion rate compared to Mg-0.2%Cu and the corrosion rate was almost the same as that of pure Mg.

Analysis of corrosion behaviour and surface properties of plasma-sprayed composite coating of hydroxyapatite–tantalum on biodegradable Mg alloy ZK60

2019 ◽  
Vol 53 (19) ◽  
pp. 2661-2673 ◽  
Author(s):  
Balraj Singh ◽  
Gurpreet Singh ◽  
Buta Singh Sidhu
Keyword(s):  
Corrosion Resistance ◽  
Surface Properties ◽  
Corrosion Behaviour ◽  
Surface Hardness ◽  
Mg Alloy ◽  
Hydroxyapatite Coating ◽  
Hydroxyapatite Coatings ◽  
Plasma Sprayed ◽  
Incremental Increase

Magnesium (Mg) and its alloys are promising candidates for biodegradable bio-implants. However, the excessive corrosion in the physiological environment and subsequent decline in the mechanical integrity of Mg and its alloys have limited their utility as biomaterials. In the present study, an attempt has been made to improve the corrosion resistance of Mg alloy ZK60 plasma sprayed with tantalum (Ta)-reinforced hydroxyapatite coating. The experiment was conducted with three varied levels, i.e. 10, 20 and 30 weight percent (wt%) of Ta-content in hydroxyapatite coating. The coatings were characterized and in vitro corrosion behaviour was investigated by electrochemical measurements in Ringer's solution along with the analysis of surface properties. The corrosion resistance of the Mg alloy increased with the incremental increase in Ta reinforcement in hydroxyapatite coating. An increase in the protection efficiency was analysed for the Ta-reinforced hydroxyapatite coatings (∼10%, 18% and 23% for hydroxyapatite-10Ta, hydroxyapatite-20Ta and hydroxyapatite-30Ta, respectively) as compared to the pure hydroxyapatite coating. The hydroxyapatite coating effectively increased the surface hardness of the Mg alloy and Ta reinforcement further enhanced it. Surface roughness decreased with the incremental increase in Ta-content in hydroxyapatite coating. Wettability analysis revealed the hydrophilic nature of pure hydroxyapatite and Ta-reinforced hydroxyapatite coatings. The results of the study suggest that the proposed Ta reinforcement in hydroxyapatite is potentially important for biodegradable Mg bio-implants.

scholarly journals Investigations on Water Jet Peening of AZ31B Mg Alloy for Bio Medical Implants

2021 ◽  
Author(s):  
Mugilvalavan Mohan ◽  
Muruganandhan Radhakrishnan ◽  
Yuvaraj Natarajan
Keyword(s):  
Surface Roughness ◽  
Corrosion Resistance ◽  
Surface Topography ◽  
Optimization Technique ◽  
Traverse Speed ◽  
Xrd Analysis ◽  
Water Jet ◽  
Mg Alloy ◽  
Working Process ◽  
Electrochemical Test

Abstract Among different unconventional peening technique, water jet is cold working process has capable to produce surface topography on wide variety of materials. This paper deals with the effect of water jet peening on the corrosion resistance and the surface topography of AZ31B Mg alloy. Variations in water jet peening variables including standoff distance, traverse speed and multiple passes have been employed in this study. A study of the enhancement in hardening and roughening effect was made following the peening process. 29.44% Improvements in microhardness and 31.06% reduction in surface roughness were observed on the peened surfaces. Optimal peened surface was obtained through use of the multi-objective optimization technique, namely, TOPSIS, which utilizes response variables such as micro hardness and surface roughness. In this study, Surface Topography, XRD Analysis and Electrochemical test were conducted. In addition, analysis of the Microstructure of corroded region was made in the unpeened and optimized peened surfaces. Surface topography parameters including Sa, Sq, SSk, Sku results confirmed the suitability of the peened surface for ooseointegration and cell growth. FWHM value measured from XRD peaks showed the formation of grain refinement on the peened surface, and the results showed promising improvements in the corrosion resistance compared to the unpeened AZ31B Mg alloy.

Micro Arc Oxidation of AZ91 Mg Alloy for Improved Corrosion Resistance

2011 ◽  
Vol 312-315 ◽  
pp. 877-881 ◽  
Author(s):  
H.G. Yavuz ◽  
M. Gunyuz ◽  
Isa Metin Ozkara ◽  
Murat Baydogan ◽  
Huseyin Cimenoglu
Keyword(s):  
Corrosion Resistance ◽  
Surface Topography ◽  
Xrd Analysis ◽  
Processing Parameters ◽  
Mg Alloy ◽  
X Ray Diffraction ◽  
Corrosive Solution ◽  
Weight Losses ◽  
Before And After ◽  
Micro Arc Oxidation

AZ91 Mg alloy was subjected to the micro arc oxidation process by using different processing parameters. Following oxidation, surface topography and qualitative phase analysis were made by tabletop digital microscopy and X-ray diffraction (XRD) analysis. In order to evaluate the relative corrosion resistance of the samples that were oxidized in different parameters, the samples were immersed in a corrosive solution for 6 days and the weight losses before and after the corrosion tests were compared. Relative corrosion resistance of the samples was evaluated on the basis of surface topography.

scholarly journals Effect of Surface Nanocrystallization on Corrosion Resistance of the Conformed Cu-0.4%Mg Alloy in NaCl Solution

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 765 ◽  
Author(s):  
Dan Song ◽  
Jinghua Jiang ◽  
Xiaonan Guan ◽  
Yanxin Qiao ◽  
Xuebin Li ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Rate ◽  
High Speed ◽  
Mg Alloy ◽  
Nacl Solution ◽  
Immersion Corrosion ◽  
Initial Stage ◽  
Wire Brushing ◽  
Dislocation Cells ◽  
Effect Of Surface

Surface nano-crystallization (SNC) of a conform-extruded Cu-0.4 wt.% Mg alloy was successfully conducted by high-speed rotating wire-brushing to obtain the deformed zone with dislocation cells and nanocrystallines. SNC promotes the anodic dissolution and corrosion rate of the Cu-Mg alloy in the initial stage of immersion corrosion in 0.1 M NaCl solution. The weakened corrosion resistance is mainly attributed to the higher corrosion activity of SNC-treated alloy. With extending the immersion time, the SNC-treated alloy slows the corrosion rate dramatically and exhibits uniform dissolution of the surface. The formation of the dense corrosion products leads to the improvement of overall corrosion performance. It indicates that the SNC-treated Cu-Mg alloy can function reliably for a longer duration in a corrosive environment.

L-Ascorbic Acid Addition to Chitosan Reduces Body Weight in Overweight Women

2014 ◽  
Vol 84 (1-2) ◽  
pp. 5-11 ◽  
Author(s):  
Eun Y. Jung ◽  
Sung C. Jun ◽  
Un J. Chang ◽  
Hyung J. Suh
Keyword(s):  
Ascorbic Acid ◽  
Body Weight ◽  
Fat Body ◽  
Body Weight Gain ◽  
Skinfold Thickness ◽  
The Body ◽  
Control Group ◽  
Percentage Body Fat ◽  
Overweight Women ◽  
Body Weights

Previously, we have found that the addition of L-ascorbic acid to chitosan enhanced the reduction in body weight gain in guinea pigs fed a high-fat diet. We hypothesized that the addition of L-ascorbic acid to chitosan would accelerate the reduction of body weight in humans, similar to the animal model. Overweight subjects administered chitosan with or without L-ascorbic acid for 8 weeks, were assigned to three groups: Control group (N = 26, placebo, vehicle only), Chito group (N = 27, 3 g/day chitosan), and Chito-vita group (N = 27, 3 g/day chitosan plus 2 g/day L-ascorbic acid). The body weights and body mass index (BMI) of the Chito and Chito-vita groups decreased significantly (p < 0.05) compared to the Control group. The BMI of the Chito-vita group decreased significantly compared to the Chito group (Chito: -1.0 kg/m2 vs. Chito-vita: -1.6 kg/m2, p < 0.05). The results showed that the chitosan enhanced reduction of body weight and BMI was accentuated by the addition of L-ascorbic acid. The fat mass, percentage body fat, body circumference, and skinfold thickness in the Chito and Chito-vita groups decreased more than the Control group; however, these parameters were not significantly different between the three groups. Chitosan combined with L-ascorbic acid may be useful for controlling body weight.

Burnout of the Mind – Burnout of the Body?

2018 ◽  
Vol 32 (1) ◽  
pp. 30-42 ◽  
Author(s):  
Claudia Traunmüller ◽  
Kerstin Gaisbachgrabner ◽  
Helmut Karl Lackner ◽  
Andreas R. Schwerdtfeger
Keyword(s):  
Blood Pressure ◽  
Allostatic Load ◽  
Maslach Burnout Inventory ◽  
The Body ◽  
Lower Percentage ◽  
Control Group ◽  
Urinary Catecholamines ◽  
Morning Cortisol ◽  
The Mind ◽  
Cortisol Increase

Abstract. In the present paper we investigate whether patients with a clinical diagnosis of burnout show physiological signs of burden across multiple physiological systems referred to as allostatic load (AL). Measures of the sympathetic-adrenergic-medullary (SAM) axis and the hypothalamic-pituitary-adrenal (HPA) axis were assessed. We examined patients who had been diagnosed with burnout by their physicians (n = 32) and were also identified as burnout patients based on their score in the Maslach Burnout Inventory-General Survey (MBI-GS) and compared them with a nonclinical control group (n = 19) with regard to indicators of allostatic load (i.e., ambulatory ECG, nocturnal urinary catecholamines, salivary morning cortisol secretion, blood pressure, and waist-to-hip ratio [WHR]). Contrary to expectations, a higher AL index suggesting elevated load in several of the parameters of the HPA and SAM axes was found in the control group but not in the burnout group. The control group showed higher norepinephrine values, higher blood pressure, higher WHR, higher sympathovagal balance, and lower percentage of cortisol increase within the first hour after awakening as compared to the patient group. Burnout was not associated with AL. Results seem to indicate a discrepancy between self-reported burnout symptoms and psychobiological load.

Perbandingan Efek Suplementasi Tablet Tambah Darah Dengan Dan Tanpa Vitamin C Terhadap Kadar Hemoglobin Pada Ibu Hamil Dengan Usiakehamilan 16-32 Minggu Di Desa Keniten Kecamatan Mojo Kabupaten Kediri

2017 ◽  
Vol 3 (1) ◽  
pp. 76
Author(s):  
Siti Asiyah ◽  
Dwi Estuning Rahayu ◽  
Wiranti Dwi Novita Isnaeni
Keyword(s):  
Treatment Group ◽  
Vitamin C ◽  
Gestational Age ◽  
Group Treatment ◽  
Sampling Technique ◽  
Hemoglobin Level ◽  
The Body ◽  
Control Group ◽  
Fetal Organ ◽  
And Control

The needed of Iron Tablet in pregnancy was increase than mother who not pregnant.  That  cause of  high metabolism at the pregnancy for formed of  fetal organ and energy. One of effort for prevent anemia in mother pregnant with giving the Iron tablet and vitamin c. The reason of  this research in 4 June – 11 July 2014 is for compare the effect of  iron tablet suplementation with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks In Desa Keniten Kecamatan Mojo Kabupaten Kediri. This research method using comparative analytical.  Research design type of Quasy Eksperiment that have treatment group and control group. Treatment group will giving by Iron tablet and 100 mg vitamin C, and control group just giving by iron tablet during 21 days. Population in this research are all of mother pregnant with Gestational Age Of 16-32 Weeks with Sampling technique is  cluster random sampling is 29 mother pregnant. Comparison analysis of  iron tablet suplementation effect with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks, data analysis using Mann Whitney U-test and the calculated U value (44,5) less than U-table (51). So there was difference of iron tablet suplementation effect with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks Therefore, the addition of vitamin C on iron intake is needed to increase the uptake of iron tablets. When the amount of iron uptake increases, the reserves of iron in the body will also increase, so as to prevent anemia in pregnant women; Keywords : Iron Tablet (Fe), Vitamin C, Hemoglobin level, Mother Pregnant

Influence of DAFS-25+polizon composition on blood and functional state of liver of steers at fattening

2020 ◽  
pp. 15-18
Author(s):  
Inna R. Kilmetova ◽  
◽  
Igor A. Rodin ◽  
Nazira I. Khayrullina ◽  
Nikolay G. Fenchenko ◽  
...  
Keyword(s):  
Functional State ◽  
White Blood Cells ◽  
Live Weight ◽  
The Body ◽  
Farm Animals ◽  
Control Group ◽  
Standard Diet ◽  
The Impact ◽  
Experimental Group ◽  
Stimulation Of

Summary. The disbalanced feeding and the uneven distribution of micro- and macroelements in the environment leads to a trace element, in particular hypomelanosis. To accelerate the growth and preservation of young farm animals include in the diet of various biological additives and drugs, which include selenium. For stimulation of weight gain in the livestock industry, as well as for the prevention and treatment of pathological processes in addition to micro - and macrouse amino acids, primarily methionine. The aim of this work was to study the influence of composition of DAFS-25+Polizon on morpho-biochemical parameters of blood and functional state of the liver in fattening bulls of black-motley breed in the conditions of the Republic of Bashkortostan. Experiments using were conducted on bull-calves of black-motley breed of the properties in the properties age from 6 to 15 months. The first experimental group during the experiment was additionally given the composition of DAFS-25+Polizon at a dose of 2 mg/kg, the animals of the control group received a standard diet. To assess the impact of the composition DAFS-25+Polizon on metabolism cattle studied morphological and biochemical indicators of blood and conducted histological examination of the liver. It is established that the use of the composition of DAFS-25+Polizon at a dose of 2 mg/kg increases the number of erythrocytes and hemoglobin in the experimental group and reduces the amount of white blood cells. The serum content of total protein, phosphorus and calcium increases in the group of experimental animals. Microscopic examination of the liver revealed no changes in the structure of the organ and hepatocytes in the experimental group, whereas in the control group hemodynamic disorders and dystrophic changes in liver cells were observed. Thus, the use of the composition DAFS-25+Polizon at a dose of 2 mg/kg of live weight in fattening bulls black-and-white breed contributes to the increase of redox processes in the body, stimulation of metabolism, prevent the development of liver disorders of cellular mechanisms of metabolism, optimizes the structure of the liver, which generally provides higher productivity.

The Toxicity of Castor Beans and its Treatment with Doxycycline in Local Rabbits

2018 ◽  
Vol 9 (2) ◽  
Author(s):  
Nael Mohammed Sarheed ◽  
Osamah Faisal Kokas ◽  
Doaa Abd Alabas Muhammed Ridh
Keyword(s):  
Castor Bean ◽  
The Body ◽  
Control Group ◽  
High Concentration ◽  
Biochemical Tests ◽  
Doxycycline Treatment ◽  
High Concentrations ◽  
Physiological Tests ◽  
Animal House ◽  
Physiological And Biochemical

The plant of castor is widely spread in the Iraqi land, and characterized with containing ricin toxin, which has a very serious effects, and because the seeds of this plant scattered in the agricultural soil and rivers water, which increases the exposure of humans and animals to these beans. Objective: This experiment was designed to study the effect of high concentration of castor bean powder in some physiological and biochemical parameters and changes in some tissues of the body, as well as trying to use doxycycline to reduce the effects of ingestion of these seeds. Materials and Methods: In the experiment, 24 local rabbits were raised and fed in the Animal House of the Faculty of Medicine / Al-Muthanna University, then divided into four groups and treated for three weeks (21 days), Control group: treated with normal saline solution (0.9) orally throughout the experiment, G1: was treated orally with a concentration of 25 mg / kg of castor bean powder daily during the experiment, G2 : orally treated 25 mg / kg of castor bean and 25 mg / kg of doxycycline, G3: orally treated 25 mg / kg of castor powder with 50 mg / kg of doxycycline daily throughout the trial period. Results: The results of the experiment showed significant changes (P less than 0.05) in all physiological and biochemical blood tests when compared with control group. There was a significant decrease in PCV, Hb, RBC, T.protein and body weights, while demonstrated a significant increase in WBC, Urea, Creatinine, ALT, AST and ALP, with distortions in liver and kidney of animals that treated with Castor beans. In contrast, the treatment with doxycycline and caster beans showed significant improvement reflected by a normal proportion in physiological tests and biochemical tests with improvement in the tissues when compared to control group. Conclusions: It can be concluded from this study that castor bean has high toxic and pathogenic effects that may be dangerous to the life of the organism. Therefore, it is advisable to be cautious of these pills and avoid exposure to them, also recommended to take high concentrations of doxycycline treatment when infected with castor bean poisoning.

Sign in / Sign up

Export Citation Format

Share Document