scholarly journals Pressure-Dependent Stability of Imidazolium-Based Ionic Liquid/DNA Materials Investigated by High-Pressure Infrared Spectroscopy

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4202 ◽  
Author(s):  
Teng-Hui Wang ◽  
Min-Hsiu Shen ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
Ionic Liquid ◽  
Infrared Spectroscopy ◽  
High Pressures ◽  
Ambient Pressure ◽  
Dna Conformation ◽  
Absorption Bands ◽  
Dna Mixtures ◽  
Dna Materials ◽  
Dna Mixture

1-Butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6])/DNA and 1-methyl-3-propylimidazolium hexafluorophosphate ([C3MIM][PF6])/DNA mixtures were prepared and characterized by high-pressure infrared spectroscopy. Under ambient pressure, the imidazolium C2–H and C4,5–H absorption bands of [C4MIM][PF6]/DNA mixture were red-shifted in comparison with those of pure [C4MIM][PF6]. This indicates that the C2–H and C4,5–H groups may have certain interactions with DNA that assist in the formation of the ionic liquid/DNA association. With the increase of pressure from ambient to 2.5 GPa, the C2–H and C4,5–H absorption bands of pure [C4MIM][PF6] displayed significant blue shifts. On the other hand, the imidazolium C–H absorption bands of [C4MIM][PF6]/DNA showed smaller frequency shift upon compression. This indicates that the associated [C4MIM][PF6]/DNA conformation may be stable under pressures up to 2.5 GPa. Under ambient pressure, the imidazolium C2–H and C4,5–H absorption bands of [C3MIM][PF6]/DNA mixture displayed negligible shifts in frequency compared with those of pure [C3MIM][PF6]. The pressure-dependent spectra of [C3MIM][PF6]/DNA mixture revealed spectral features similar to those of pure [C3MIM][PF6]. Our results indicate that the associated structures of [C4MIM][PF6]/DNA are more stable than those of [C3MIM][PF6]/DNA under high pressures.

scholarly journals Utilizing Infrared Spectroscopy to Analyze the Interfacial Structures of Ionic Liquids/Al2O3 and Ionic Liquids/Mica Mixtures under High Pressures

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 373 ◽  
Author(s):  
Yen-Hsu Chang ◽  
Hai-Chou Chang ◽  
Yen-Pei Fu
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Infrared Spectroscopy ◽  
Local Structure ◽  
High Pressures ◽  
Ambient Pressure ◽  
Solid Particles ◽  
Solid Surfaces ◽  
Methyl Sulfate ◽  
Interfacial Interactions

The interfacial interactions between ionic liquids (1,3-dimethylimidazolium methyl sulfate and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate) and solid surfaces (mesoporous aluminum oxide and mica) have been studied by infrared spectroscopy at high pressures (up to 2.5 GPa). Under ambient pressure, the spectroscopic features of pure ionic liquids and mixtures of ionic liquids/solid particles (Al2O3 and mica) are similar. As the pressure is increased, the cooperative effect in the local structure of pure 1,3-dimethylimidazolium methyl sulfate becomes significantly enhanced as the imidazolium C–H absorptions of the ionic liquid are red-shifted. However, this pressure-enhanced effect is reduced by adding the solid particles (Al2O3 and mica) to 1,3-dimethylimidazolium methyl sulfate. Although high-pressure IR can detect the interactions between 1,3-dimethylimidazolium methyl sulfate and particle surfaces, the difference in the interfacial interactions in the mixtures of Al2O3 and mica is not clear. By changing the type of ionic liquid to 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, the interfacial interactions become more sensitive to the type of solid surfaces. The mica particles in the mixture perturb the local structure of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate under high pressures, forcing 1-ethyl-3-methylimidazolium trifluoromethanesulfonate to form into an isolated structure. For Al2O3, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate tends to form an associated structure under high pressures.

scholarly journals Characterization of Local Structures of Confined Imidazolium Ionic Liquids in PVdF-co-HFP Matrices by High Pressure Infrared Spectroscopy

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1973 ◽  
Author(s):  
Teng-Hui Wang ◽  
Ming-Siou Wu ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
Ionic Liquids ◽  
Infrared Spectroscopy ◽  
High Pressures ◽  
Vinylidene Fluoride ◽  
Ambient Pressure ◽  
Liquid Polymer ◽  
Local Structures ◽  
Poly Vinylidene Fluoride

The nanoscale ion ordering of ionic liquids at confined interfaces under high pressures was investigated in this study. 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([HMIM][NTf2])/poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-co-HFP) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf2])/PVdF-co-HFP were prepared and characterized by using high-pressure infrared spectroscopy. Under ambient pressure, imidazolium C2–H and C4,5–H absorptions were blue-shifted in frequency due to the presence of PVdF-co-HFP. However, the absorption of anionic νa SO2 did not reveal any significant shifts in frequency upon dilution by PVdF-co-HFP. The experimental results suggest that PVdF-co-HFP disturbs the local structures of the imidazolium C–H groups instead of the anionic SO2 groups. The frequency shifts of C4,5–H became dramatic for the mixtures at high pressures. These results suggest that pressure-enhanced ionic liquid–polymer interactions may play an appreciable role in IL-PVdF-co-HFP systems under high pressures. The pressure-induced blue-shifts due to the PVdF-co-HFP additions were more obvious for the [HMIM][NTf2] mixtures than for [EMIM][NTf2] mixtures.

scholarly journals Pressure-Dependent Clustering in Ionic-Liquid-Poly (Vinylidene Fluoride) Mixtures: An Infrared Spectroscopic Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2099
Author(s):  
Teng-Hui Wang ◽  
Wei-Xiang Wang ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Vinylidene Fluoride ◽  
Ambient Pressure ◽  
Infrared Spectroscopic Study ◽  
Research Attention ◽  
Nanoscale Structures ◽  
Local Structures ◽  
Poly Vinylidene Fluoride ◽  
Hydrogen Bonded

The nanostructures of ionic liquids (ILs) have been the focus of considerable research attention in recent years. Nevertheless, the nanoscale structures of ILs in the presence of polymers have not been described in detail at present. In this study, nanostructures of ILs disturbed by poly(vinylidene fluoride) (PVdF) were investigated via high-pressure infrared spectra. For 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([HEMIm][TFSI])-PVdF mixtures, non-monotonic frequency shifts of the C4,5-H vibrations upon dilution were observed under ambient pressure. The experimental results suggest the presence of microheterogeneity in the [HEMIm][TFSI] systems. Upon compression, PVdF further influenced the local structure of C4,5–H via pressure-enhanced IL–PVdF interactions; however, the local structures of C2–H and hydrogen-bonded O–H were not affected by PVdF under high pressures. For choline [TFSI]–PVdF mixtures, PVdF may disturb the local structures of hydrogen-bonded O–H. In the absence of the C4,5–H⋯anion and C2–H⋯anion in choline [TFSI]–PVdF mixtures, the O–H group becomes a favorable moiety for pressure-enhanced IL–PVdF interactions. Our results indicate the potential of high-pressure application for designing pressure-dependent electronic switches based on the possible changes in the microheterogeneity and electrical conductivity in IL-PVdF systems under various pressures.

PRESSURE-INDUCED ELECTRONIC PHASE TRANSITIONS AND SUPERCONDUCTIVITY IN TITANIUM

2009 ◽  
Vol 23 (05) ◽  
pp. 723-741 ◽  
Author(s):  
K. IYAKUTTI ◽  
C. NIRMALA LOUIS ◽  
S. ANURATHA ◽  
S. MAHALAKSHMI
Keyword(s):  
High Pressure ◽  
Band Structure ◽  
Fermi Surface ◽  
High Pressures ◽  
Ambient Pressure ◽  
Structural Phase ◽  
Normal Pressure ◽  
Orbital Method ◽  
Superconducting Transition ◽  
Electronic Band

The electronic band structure, density of states, structural phase transition, superconducting transition and Fermi surface cross section of titanium ( Ti ) under normal and high pressures are reported. The high pressure band structure exhibits significant deviations from the normal pressure band structure due to s → d transition. On the basis of band structure and total energy results obtained using tight-binding linear muffin-tin orbital method (TB LMTO), we predict a phase transformation sequence of α( hcp ) → ω (hexagonal) → γ (distorted hcp) → β (bcc) in titanium under pressure. From our analysis, we predict a δ (distorted bcc) phase which is not stable at any high pressures. At ambient pressure, the superconducting transition occurs at 0.354 K. When the pressure is increased, it is predicted that, Tc increases at a rate of 3.123 K/Mbar in hcp–Ti . On further increase of pressure, Tc begins to decrease at a rate of 1.464 K/Mbar. The highest value of Tc(P) estimated is 5.043 K for hcp–Ti , 4.538 K for ω– Ti and 4.85 K for bcc – Ti . From this, it is inferred that the maximum value of Tc(P) is rather insensitive to the crystal structure of Ti . The nonlinearities in Tc(P) is explained by considering the destruction and creation of new parts of Fermi surface at high pressure. At normal pressure, the hardness of Ti is in the following order: ω- Ti > hcp - Ti > bcc- Ti > γ- Ti .

LEAD-CHALCOGENIDES UNDER PRESSURE: AB-INITIO STUDY

2013 ◽  
Vol 22 ◽  
pp. 612-618 ◽  
Author(s):  
DINESH C. GUPTA ◽  
IDRIS HAMID
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
Ab Initio ◽  
Band Gap ◽  
Rock Salt ◽  
High Pressures ◽  
Ambient Pressure ◽  
High Pressure Phase ◽  
Lead Chalcogenides ◽  
Pressure Phase

ab-initio calculations using fully relativistic pseudo-potential have been performed to investigate the high pressure phase transition, elastic and electronic properties of lead-chalcogenides including the less known lead polonium. The calculated ground state parameters, for the rock-salt structure show good agreement with the experimental data. The enthalpy calculations show that these materials undergo a first-order phase transition from rock-salt to CsCl structure at 19.4, 15.5, 11.5 and 7.3 GPa for PbS, PbSe, PbTe and PbPo, respectively. Present calculations successfully predicted the location of the band gap at L-point of Brillouin zone as well as the value of the band gap in every case at ambient pressure. It is observed that unlike other lead-chalcogenides, PbPo is semi-metal at ambient pressure. The pressure variation of the energy gap indicates that these materials metalized under high pressures. For this purpose, the electronic structure of these materials has also been computed in parent as well as in high pressure phase.

High-pressure transformations of NbO2F

2000 ◽  
Vol 56 (2) ◽  
pp. 189-196 ◽  
Author(s):  
Stefan Carlson ◽  
Ann-Kristin Larsson ◽  
Franziska E. Rohrer
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
High Pressures ◽  
Ambient Pressure ◽  
Close Packing ◽  
Hexagonal Close Packing ◽  
Rietveld Refinements ◽  
X Ray ◽  
Anion Coordination ◽  
Diamond Anvil

The ReO3-type structure NbO2F, niobium dioxyfluoride, has been studied at high pressures using diamond anvil cells and synchrotron X-ray radiation. High-pressure powder diffraction measurements have been performed up to 40.1 GPa. A phase transition from the cubic (Pm3¯m) ambient pressure structure to a rhombohedral (R3¯c) structure at 0.47 GPa has been observed. Rietveld refinements at 1.38, 1.96, 3.20, 6.23, 9.00 and 10.5 GPa showed that the transition involves an a − a − a − tilting of the cation–anion coordination octahedra and a change of the anion–anion arrangement to approach hexagonal close packing. Compression and distortion of the Nb(O/F)6 octahedra is also revealed by the Rietveld refinements. At 17–18 GPa, the diffraction pattern disappears and the structure becomes X-ray amorphous.

scholarly journals Crystal structures and dynamical properties of dense CO2

2016 ◽  
Vol 113 (40) ◽  
pp. 11110-11115 ◽  
Author(s):  
Xue Yong ◽  
Hanyu Liu ◽  
Min Wu ◽  
Yansun Yao ◽  
John S. Tse ◽  
...  
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Theoretical Calculations ◽  
Ambient Pressure ◽  
Md Simulations ◽  
Ab Initio Molecular Dynamics ◽  
Structural Polymorphism ◽  
Stability Structure ◽  
Dynamical Properties ◽  
The Stability

Structural polymorphism in dense carbon dioxide (CO2) has attracted significant attention in high-pressure physics and chemistry for the past two decades. Here, we have performed high-pressure experiments and first-principles theoretical calculations to investigate the stability, structure, and dynamical properties of dense CO2. We found evidence that CO2-V with the 4-coordinated extended structure can be quenched to ambient pressure below 200 K—the melting temperature of CO2-I. CO2-V is a fully coordinated structure formed from a molecular solid at high pressure and recovered at ambient pressure. Apart from confirming the metastability of CO2-V (I-42d) at ambient pressure at low temperature, results of ab initio molecular dynamics and metadynamics (MD) simulations provided insights into the transformation processes and structural relationship from the molecular to the extended phases. In addition, the simulation also predicted a phase V′(Pna21) in the stability region of CO2-V with a diffraction pattern similar to that previously assigned to the CO2-V (P212121) structure. Both CO2-V and -V′ are predicted to be recoverable and hard with a Vicker hardness of ∼20 GPa. Significantly, MD simulations found that the CO2 in phase IV exhibits large-amplitude bending motions at finite temperatures and high pressures. This finding helps to explain the discrepancy between earlier predicted static structures and experiments. MD simulations clearly indicate temperature effects are critical to understanding the high-pressure behaviors of dense CO2 structures—highlighting the significance of chemical kinetics associated with the transformations.

High Pressure Properties of Superconducting Material Palladium

2013 ◽  
Vol 813 ◽  
pp. 327-331
Author(s):  
Wei Min Peng ◽  
Zhong Li Liu ◽  
Hong Zhi Fu
Keyword(s):  
High Pressure ◽  
Perturbation Theory ◽  
Transition Temperature ◽  
Superconducting Transition Temperature ◽  
Density Functional ◽  
High Pressures ◽  
Ambient Pressure ◽  
Superconducting Transition ◽  
Superconducting Properties ◽  
Density Functional Perturbation Theory

The electronic and the superconducting properties of Pd were studied in the framework of density functional perturbation theory. We explored the superconducting transition temperature for bulk Pd and predicted possible superconductivity at ambient and high pressures. It is found that of Pd is 0.0356 K at ambient pressure and it decreases with pressure.

Water and hexane in an ionic liquid: computational evidence of association under high pressure

2017 ◽  
Vol 19 (13) ◽  
pp. 8661-8666 ◽  
Author(s):  
A. Mariani ◽  
R. Caminiti ◽  
L. Gontrani
Keyword(s):  
High Pressure ◽  
Ionic Liquid ◽  
High Pressures

Dissolving water and hexane in an ionic liquid, our simulations clearly show association between them at high pressures.

High Pressure Materials Physics Research at UNLV

2014 ◽  
Vol 783-786 ◽  
pp. 1836-1838
Author(s):  
Andrew L. Cornelius ◽  
Brant Abeln ◽  
Daniel Antonio ◽  
Jason Baker ◽  
Patricia E. Kalita ◽  
...  
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Ambient Pressure ◽  
Strongly Correlated ◽  
Electron Systems ◽  
Strongly Correlated Electron ◽  
Correlated Electron Systems ◽  
Correlated Electron ◽  
High Pressure Studies ◽  
Heat Capacity Measurements

High-pressure studies on strongly correlated-electron systems allow the study of the relationship between structural, elastic, electronic, and magnetic properties of d-and f-band systems. The High Pressure Science and Engineering Center (HiPSEC) at UNLV performs interdisciplinary research on a wide variety of materials at high pressures. One such system, YbB2 displays antiferromagnet order at ambient pressure. We present heat capacity measurements at high magnetic fields to 9 T and structural measurement at pressures up to 5 GPa on YbB2.

Sign in / Sign up

Export Citation Format

Share Document