scholarly journals A Study of Second-Phase Precipitates and Dispersoid Particles in 2024 Aluminum Alloy after Different Aging Treatments

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4168 ◽  
Author(s):  
Anna Staszczyk ◽  
Jacek Sawicki ◽  
Boguslawa Adamczyk-Cieslak
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Material Properties ◽  
Artificial Aging ◽  
Precipitation Hardening ◽  
Chemical Compositions ◽  
Second Phase ◽  
2024 Aluminum Alloy ◽  
Intermetallic Particles ◽  
Different Types

Aluminum alloys such as AA2024 are popular in the automotive and aircraft industries. The application of artificial aging significantly improves their mechanical properties by precipitation hardening. However, commercial alloys very often contain different amounts of elements such as Si and Fe that make the evolution of the microstructure harder to control. Large intermetallic particles can influence the overall results of heat treatment and cause deterioration of material properties. The authors decided to examine changes in the microstructure of three commercial 2024 alloys with varying chemical compositions by applying three different types of aging treatments. The results show considerable differences in the amount, size and morphologies of the precipitates. Second-phase Al2Cu and Al2CuMg precipitates were identified in one of the alloys. Other interesting types of multiphase particles were discovered in alloys with higher Si contents. The results show that even small variations in the composition can lead to a completely different microstructure.

scholarly journals Study of the precipitation hardening process in recycled Al-Si-Cu cast alloys

2017 ◽  
Vol 62 (1) ◽  
pp. 397-403 ◽  
Author(s):  
L. Kuchariková ◽  
E. Tillová ◽  
M. Matvija ◽  
J. Belan ◽  
M. Chalupová
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Precipitation Hardening ◽  
Cast Alloy ◽  
Solution Treatment ◽  
Second Phase ◽  
Thin Foils ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Cast Alloys

AbstractThe formation of extremely small uniformly dispersed particles of a second phase within the original phase matrix during heat treatment changed material properties. Therefore the characterization of precipitation had been investigated using high resolution transmission electron microscopy (TEM) and electron diffraction of thin foils for an AlSi9Cu3 cast alloy. For investigation the hardening effect onto mechanical properties of aluminium cast was used heat treatment, which consisted from solution treatment at 515°C / 4 hours (h), followed by quenching into water with temperature 50°C and artificial aging using different temperatures 170°C and 190°C with different holding time 2, 4, 8, 16, and 32 hours. The observations of microstructure and substructure reveals that precipitation hardening has caused great changes in size, morphology and distributions of structural components, the formation of precipitates of Cu phases, and the change of mechanical properties as well.

The Effect of Heat Treatment on Mechanical Properties of Car Interior Fabric Used for Injection Molding

2012 ◽  
Vol 532-533 ◽  
pp. 234-237
Author(s):  
Wei Lai Chen ◽  
Ding Hong Yi ◽  
Jian Fu Zhang
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
High Temperature ◽  
Injection Molding ◽  
High Temperatures ◽  
Material Properties ◽  
Injection Molding Process ◽  
Molding Process ◽  
Composite Fabrics

The purpose of this paper is to study the effect of high temperature in injection molding process on mechanical properties of the warp-knitted and nonwoven composite fabrics (WNC)used in car interior. Tensile, tearing and peeling properties of WNC fabrics were tested after heat treatment under120, 140,160,180°C respectively. It was found that, after 140°C heat treatment, the breaking and tearing value of these WNC fabrics are lower than others. The results of this study show that this phenomenon is due to the material properties of fabrics. These high temperatures have no much effect on peeling properties of these WNC fabrics. It is concluded that in order to preserve the mechanical properties of these WNC fabrics, the temperature near 140°C should be avoided possibly during injection molding process.

Permanent Mold Casting Practice and Microstructure and Mechanical Properties of Thin-Sectioned ADI Casting

2007 ◽  
Vol 26-28 ◽  
pp. 531-534
Author(s):  
B.M. Moon ◽  
Bong Hwan Kim ◽  
Je Sik Shin ◽  
Sang Mok Lee
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Ductile Cast Iron ◽  
Treatment Temperature ◽  
Chemical Compositions ◽  
Permanent Mold ◽  
Permanent Mold Casting ◽  
Treatment Practice ◽  
Mold Casting ◽  
Si Content

For thin-walled casting development of austempered ductile iron (ADI), permanent mold casting and accompanied heat treatment practice were systematically investigated to suppress and/or remove chill defects of ductile cast iron (DCI) with various thickness of 2 to 9 mm and to ensure mechanical properties of the final ADI casting. Si content was increased up to 3.8% to reduce the chill formation tendency under a high cooling rate. The residual Mg content remarkably affected the nodule count, while the nodule size and spherodization were proven to have weak relationships. Austenitizing process followed by austempering was very sensitive to chemical compositions (Si and Sn) and heat treatment temperature. As a practical application, the steel bar coupler for a structural frame was tried to produce without subsequent machining.

Heat treatememt effect on microstructure and mechanical properties of precipitation hardening elinvar alloy

2021 ◽  
pp. 68-73
Author(s):  
G.V. Shlyakhova ◽  
◽  
A.V. Bochkareva ◽  
M.V. Nadezhkin ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Phase Composition ◽  
Structural Analysis ◽  
Thermal Treatment ◽  
Precipitation Hardening ◽  
Physical And Mechanical Properties ◽  
Alloy Structure ◽  
Treatment Mode ◽  
Elinvar Alloy

This study presents experimental results of structural analysis, such as phase composition, grains size assessment, strength and hardness of Ni-SPAN-C alloy 902 after various heat treatment modes (hardening and aging for stress relaxation). A thermal treatment mode has been selected to obtain higher physical and mechanical properties of the elinvar alloy. It is shown that the improvement of the alloy structure in thermal treatment occurs due to the thermic stresses, as well as the formation and dissolution of intermetallides.

Comparison of Microstructure and Mechanical Properties of Additively Manufactured and Conventional Maraging Steel

2020 ◽  
Vol 405 ◽  
pp. 133-138
Author(s):  
Ludmila Kučerová ◽  
Andrea Jandová ◽  
Ivana Zetková
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Maraging Steel ◽  
Precipitation Hardening ◽  
High Strength ◽  
Hardness Measurement ◽  
Nickel Steel ◽  
Heat Treated ◽  
Good Material ◽  
Iron Nickel

Maraging steel is an iron-nickel steel alloy, which achieves very good material properties like high toughness, hardness, good weldability, high strength and dimensional stability during heat treatment. In this work, maraging steel 18Ni-300 was manufactured by selective laser melting. It is a method of additive manufacturing (AM) technology, which produces prototypes and functional parts. Sample of additively manufactured and conventional steel with the same chemical composition were tested after in three different states – heat treated (as-built/as-received), solution annealed and precipitation hardened. Resulting microstructures were analysed by light and scanning electron microscopy and mechanical properties were obtained by hardness measurement and tensile test. Cellular martensitic microstructures were observed in additively manufactured samples and conventional maraging steel consisted of lath martensitic microstructures. Very similar mechanical properties were obtained for both steels after the application of the same heat treatment. Ultimate tensile strengths reached 839 – 900 MPa for samples without heat treatment and heat treated by solution annealing, the samples after precipitation hardening had tensile strengths of 1577 – 1711 MPa.

scholarly journals Friction Stir Welding Parameters: Impact of Abnormal Grain Growth during Post-Weld Heat Treatment on Mechanical Properties of Al–Mg–Si Welded Joints

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1607
Author(s):  
Amir Hossein Baghdadi ◽  
Zainuddin Sajuri ◽  
Mohd Zaidi Omar ◽  
Armin Rajabi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Friction Stir Welding ◽  
Grain Growth ◽  
Precipitation Hardening ◽  
Al Alloys ◽  
Abnormal Grain Growth ◽  
Post Weld Heat Treatment ◽  
Welding Parameters ◽  
Friction Stir

Friction stir welding (FSW) is an alternative method to join aluminum (Al) alloys in a solid-state condition. However, the coarsening or dissolution of precipitation hardening phases in the welding zone causes strength reduction or softening behavior in the welded area of age-hardened Al alloys. Therefore, this research aimed to improve the mechanical properties of an FSW Al–Mg–Si alloy via post-weld heat treatment (PWHT) and the possibility of controlling the abnormal grain growth (AGG) using different welding parameters. FSW was performed with different rotational and travel speeds, and T6 heat treatment was carried out on the FSW samples as the PWHT. The results showed a decrease in the strength of the FSW samples compared with that of the base material (BM) due to the dissolution of precipitation hardening particles in the heat-affected zone. However, the emergence of AGG in the microstructure after the T6-PWHT was identified as the potential event in the microstructure of the PWHT samples. It is found that the AGG of the microstructure in similar joints of Al6061(T6) was governed by the welding parameters. The results proved that PWHT was able to increase the tensile properties of the welded samples to values comparable to that of Al6061(T6)-BM. The increased mechanical properties of the FSW joints were attributed to a proper PWHT that resulted in a homogeneous distribution of the precipitation hardening phases in the welding zones.

scholarly journals Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3805 ◽  
Author(s):  
Janusz Kluczyński ◽  
Lucjan Śnieżek ◽  
Krzysztof Grzelak ◽  
Artur Oziębło ◽  
Krzysztof Perkowski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Hot Isostatic Pressing ◽  
Tensile Tests ◽  
Fracture Analysis ◽  
Image Correlation ◽  
Treatment Processes ◽  
Different Types ◽  
316L Steel ◽  
Precipitation Heat

In this study, we analyzed the mechanical properties of selectively laser melted (SLM) steel obtained via different modifications during and after the manufacturing process. The aim was to determine the effects of precipitation heat treatment on the mechanical properties of elements additively manufactured using three different process parameters. Some samples were additionally obtained using hot isostatic pressing (HIP), while some were treated using two different types of heat treatment and a combination of those two processes. From each manufactured sample, a part of the material was taken for structural analysis including residual stress analysis and microstructural investigations. In the second part of the research, the mechanical properties were studied to define the scleronomic hardness of the samples. Finally, tensile tests were conducted using a digital image correlation (DIC) test and fracture analysis. The treated samples were found to be significantly elongated, thus indicating the advantages of using precipitation heat treatment. Additionally, precipitation heat treatment was found to increase the porosity of samples, which was the opposite compared to HIP-treated samples.

Effect of Non-Conventional Aging Treatments on the Tensile Properties of Non-Hipped Castings of Aluminum Alloy 354

2014 ◽  
Vol 875-877 ◽  
pp. 1397-1405 ◽  
Author(s):  
G. Dinesh Babu ◽  
M. Nageswara Rao
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
Tensile Properties ◽  
Artificial Aging ◽  
Natural Aging ◽  
Single Step ◽  
Cast Aluminum Alloy ◽  
Cast Aluminum ◽  
Automobile Components

Cast aluminum alloy 354 is used extensively for production of critical automobile components, owing to its excellent castability and attractive combination of mechanical properties after heat-treatment. With the advent of higher performance engines, there has been a steady demand to further improve the mechanical behavior of the castings made of the alloy, among others, through improvements in processing. The present study explores the possibility of improving tensile properties of the alloy by adopting certain non-conventional aging treatments. The non-conventional treatments include aging cycles similar to T6I4 and T6I6 referred to in the published literature, artificial aging in two steps instead of in single step and artificial aging preceded by various natural aging times. The results show that none of these non-conventional treatments leads to improvement of all tensile properties compared to the standard T61 treatment. Significant hardening takes place in the alloy due to natural aging. Changing the time of natural aging preceding artificial aging was found to have little effect on tensile properties.

Sign in / Sign up

Export Citation Format

Share Document