scholarly journals Removal of Cadmium from Aqueous Solutions by Saccharomyces cerevisiae–Alginate System

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4128
Author(s):  
Silvia Carolina Moreno Rivas ◽  
Rosa Idalia Armenta Corral ◽  
María del Carmen Frasquillo Félix ◽  
Alma Rosa Islas Rubio ◽  
Luz Vázquez Moreno ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Fixed Bed ◽  
Alginate Beads ◽  
Fixed Bed Column ◽  
Removal Capacity ◽  
Column System ◽  
Low Concentrations ◽  
Negative Surface ◽  
Negative Surface Charge ◽  
Efficient Option

The aim of this study was to determine the Cd2+ removal capacity of a biosorbent system formed by Saccharomyces cerevisiae in calcium alginate beads. The adsorption of Cd2+ by a S. cerevisiae–alginate system was tested either by batch or fixed-bed column experiments. The S. cerevisiae–alginate system was characterized using dynamic light scattering (DLS, zeta potential), size, hardness, scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy. Beads of the S. cerevisiae–alginate system showed a spherical–elliptical morphology, diameter of 1.62 ± 0.02 mm, 96% moisture, negative surface charge (−29.3 ± 2.57 mV), and texture stability during storage at 4 °C for 20 days. In batch conditions, the system adsorbed 4.3 µg of Cd2+/g of yeast–alginate beads, using a Cd2+ initial concentration of 5 mg/L. Adsorption capacity increased to 15.4 µg/g in a fixed-bed column system, removing 83% of total Cd2+. In conclusion, the yeast–alginate system is an efficient option for the removal of cadmium at low concentrations in drinking water.

Reduction of Surfactant Retention in Limestones Using Sodium Hydroxide

SPE Journal ◽  
2018 ◽  
Vol 24 (01) ◽  
pp. 92-115 ◽  
Author(s):  
D.. Wang ◽  
M.. Maubert ◽  
G. A. Pope ◽  
P. J. Liyanage ◽  
S. H. Jang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Sodium Hydroxide ◽  
Anionic Surfactants ◽  
Geochemical Modeling ◽  
Low Molecular Weight ◽  
Low Concentrations ◽  
Reservoir Conditions ◽  
Negative Surface ◽  
Negative Surface Charge ◽  
Indiana Limestone

Summary Geochemical modeling was used to design and conduct a series of alkaline/surfactant/polymer (ASP) coreflood experiments to measure the surfactant retention in limestone cores using sodium hydroxide (NaOH) as the alkali. Surfactant/polymer (SP) coreflood experiments were conducted under the same conditions for comparison. NaOH has been used for ASP floods of sandstones, but these are the first experiments to test it for ASP floods of limestones. Two studies performed under different reservoir conditions showed that NaOH significantly reduced the surfactant retention in Indiana Limestone. An ASP solution with 0.3 wt% NaOH has a pH of approximately 12.6 at 25°C. The high pH increases the negative surface charge of the carbonate, which favors lower adsorption of anionic surfactants. Another advantage of NaOH is that low concentrations of only approximately 0.3 wt% can be used because of its low molecular weight and its low consumption in limestones. Most reservoir carbonates contain gypsum or anhydrite, and therefore sodium carbonate (Na2CO3) will be consumed by the precipitation of calcium carbonate (CaCO3). As shown in the two studies, NaOH can be used in limestone reservoirs containing gypsum or anhydrite.

scholarly journals Sorption of Ag+ and Cu2+ by Vermiculite in a Fixed-Bed Column: Design, Process Optimization and Dynamics Investigations

2018 ◽  
Vol 8 (11) ◽  
pp. 2221 ◽  
Author(s):  
Olga Długosz ◽  
Marcin Banach
Keyword(s):  
Flow Rate ◽  
Continuous Process ◽  
Fixed Bed ◽  
Copper Ion ◽  
Cost Effective ◽  
Breakthrough Curves ◽  
Fixed Bed Column ◽  
Column System ◽  
Total Percentage ◽  
Bed Height

Vermiculite has been used for the removal of Cu 2 + and Ag + from aqueous solutions in a fixed-bed column system. The effects of initial silver and copper ion concentrations, flow rate, and bed height of the adsorbent in a fixed-bed column system were investigated. Statistical analysis confirmed that breakthrough curves depended on all three factors. The highest inlet metal cation concentration (5000 mg/dm3), the lowest bed height (3 cm) and the lowest flow rate (2 and 3 cm3/min for Ag + and Cu 2 + , respectively) were optimal for the adsorption process. The maximum total percentage of metal ions removed was 60.4% and 68.7% for Ag+ and Cu2+, respectively. Adsorption data were fitted with four fixed-bed adsorption models, namely Clark, Bohart–Adams, Yoon–Nelson and Thomas models, to predict breakthrough curves and to determine the characteristic column parameters. The adsorbent was characterized by SEM, FTIR, EDS and BET techniques. The results showed that vermiculite could be applied as a cost-effective sorbent for the removal of Cu 2 + and Ag + from wastewater in a continuous process.

scholarly journals Surface properties related to concanavalin A-induced agglutination. A comparative study of several Entamoeba strains.

1977 ◽  
Vol 145 (3) ◽  
pp. 652-665 ◽  
Author(s):  
D Trissl ◽  
A Martínez-Palomo ◽  
C Argüello ◽  
M de la Torre ◽  
R de la Hoz
Keyword(s):  
Surface Properties ◽  
Concanavalin A ◽  
Room Temperature ◽  
Lectin Binding ◽  
Cationized Ferritin ◽  
Con A ◽  
Low Concentrations ◽  
Negative Surface ◽  
Negative Surface Charge ◽  
Axenic Strains

Pathogenic strains of Entamoeba histolytica are more easily agglutinated with concanavalin A (Con A) than strains isolated from human asymptomatic carriers. All three pathogenic strains studied here were found to agglutinate with low concentrations of Con A in contrast to various nonpathogenic axenic strains of amebas, characterized by their ability to grow at room temperature. Our present observations suggest that the extreme susceptibility of pathogenic strains of E. histolytica to agglutinate with Con A is related to their higher capacity for lectin binding and to their lack of detectable repulsive charges at the cell surface. The amount of fluorescein-tagged Con A bound to the surface was much higher in pathogenic strains. Only nonpathogenic strains showed a detectable negative surface charge as studied both by means of cell microelectrophoresis and by labeling cells with cationized ferritin at 0 degrees C. The mobility of surface Con A receptors estimated as the percentage of caps was comparable in all strains. Results of one strain cultured in axenic and monoxenic conditions suggested that bacteria can modify the behaviour of E. histolytica trophozoites by altering surface properties of the amebas.

scholarly journals Batch and Fixed-Bed Biosorption of Pb (II) Using Free and Alginate-Immobilized Spirulina

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 466
Author(s):  
Maria Villen-Guzman ◽  
Carlos Jiménez ◽  
Jose Miguel Rodriguez-Maroto
Keyword(s):  
Ionic Strength ◽  
Adsorption Capacity ◽  
Dose Response ◽  
Ph Value ◽  
Fixed Bed ◽  
Alginate Beads ◽  
Breakthrough Curves ◽  
Pressure Drops ◽  
Removal Capacity ◽  
Biosorption Process

The valorization of Spirulina as a potential biosorption material to treat contaminated wastewater was evaluated. Batch experiments were conducted to study the influence of pH value and ionic strength on the biosorption capacity of Spirulina. Higher removal capacity was observed at pH 5.2, while higher ionic strength was found to result in lower adsorption capacity, which suggests that ion exchange is a relevant mechanism for Pb (II) adsorption on Spirulina. The immobilization of Spirulina on alginate beads was found not only to increase the adsorption capacity, but also to overcome limitations such as unacceptable pressure drops on column systems. The Langmuir model was the most appropriate model to describe the biosorption equilibrium of lead by free and immobilized Spirulina. The experimental breakthrough curves were evaluated using the Thomas, Bohart-Adams, and dose-response models. The experimental results were most properly described by the dose-response model, which is consistent with previous results. The adsorption capacity of Spirulina was found to increase linearly with the influent lead concentration (in the range 4–20 mg L−1) at 1.6 mL min−1 flow rate. Batch and column experiments were compared to better understand the biosorption process. The promising results obtained indicate the potential use of Spirulina immobilized on alginate beads to treat industrial wastewater polluted with toxic metals.

Sign in / Sign up

Export Citation Format

Share Document