scholarly journals Effect of Nano Alumina on the Properties of Fluorinated Polyurethane

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4120
Author(s):  
Ruizhu Zhang ◽  
Wenbo Wang ◽  
Chongyang Wang ◽  
Wejie Tian ◽  
Jianlin Hang ◽  
...  
Keyword(s):  
Hard Segment ◽  
Wear Test ◽  
High Water ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Coating Materials ◽  
Near Surface ◽  
Coating Surface ◽  
Fluorinated Polyurethane ◽  
Nano Alumina

This article selects studies on the preparation of fluorinated polyurethane-nano-alumina composite coating materials, and analyzes the anti-wear, water resistantance, and surface microstructure. Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) shows that the polyurethane synthesized in this study does not contain hydrophilic –CH2OH groups. The cavitation wear test depicts that the actual cavitation amount C of the Al2O3-FPU (4) (fluorinated polyurethane) coating is 0.9035 × 10−3 kg, and the anti-wear ability increases by 61.9% compared with FPU-0.5. The water-resistant test shows that the contact angle of water droplets on the surface of the coating increase from 95.3° of FPU-0.5 to 123.1° of Al2O3-FPU (4), and the water absorption decreases from 2.52% to 1.04%. Scanning electron microscopy (SEM) observation confirms that alumina particles can protrude on the coating surface and resist strong wear, while the C-F chain with high bond energy at the near-surface exhibits high strength and water resistance, which prevents wear from spreading deep into the coating. Differential scanning calorimetry (DSC) results show that the Tg(HS) value of the hard segment phase decreases with higher external force. Notably, when the coating is subjected to erosion, which enhances the crystallinity of the hard segment phase, the tensile strength of the hard segment phase of the coating surface is improved, which supports the wear resistance. Herein, we show that the addition of nano-alumina to fluorinated polyurethanes can control high water and abrasion resistance.

scholarly journals Shape memory polyurethanes based on recycled polyvinyl butyral. I. Synthesis and morphology

2013 ◽  
Vol 11 (12) ◽  
pp. 2058-2065 ◽  
Author(s):  
Tsvetomir Tsonev ◽  
Michael Herzog ◽  
Sanchi Nenkova
Keyword(s):  
Shape Memory ◽  
Hard Segment ◽  
Soft Segment ◽  
Polyvinyl Butyral ◽  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Polypropylene Glycol ◽  
Scanning Calorimetry ◽  
Chemical Crosslinks ◽  
Physical And Chemical

AbstractShape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect.

The efficacy of electrospun polyurethane fibers with TiO2 in a real time weathering condition

2017 ◽  
Vol 88 (21) ◽  
pp. 2445-2453 ◽  
Author(s):  
Emilija Zdraveva ◽  
Budimir Mijovic ◽  
Emi Govorcin Bajsic ◽  
Vedrana Grozdanic
Keyword(s):  
Real Time ◽  
Uv Radiation ◽  
Hard Segment ◽  
Thermoplastic Polyurethane ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Degradation Temperature ◽  
Chain Mobility ◽  
Fiber Degradation ◽  
Almost All

This study focuses on the behavior of electrospun polyurethane fibers filled with nano, micro spheres and nanotube TiO2, thus nTiO2, mTiO2 or TiNT, under real time ultraviolet (UV) radiation. Analyses were conducted using scanning electron microscopy (SEM), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis and differential scanning calorimetry (DSC) techniques. Significant changes of thermoplastic polyurethane (TPU) + 0.5% nTiO2 and TPU + 0.5% mTiO2 fibers morphology, that is, agglomerated TiO2 particles, were observed on material surfaces due to TPU fiber degradation, also supported by FTIR spectra given as reduction in the peaks intensities after UV radiation, especially in the case of TPU + 0.5% nTiO2. Further, after UV radiation, the initial degradation temperature reduction of the hard segment for all materials was up to 40℃. A significant reduction in the final degradation temperature (from 397.8℃ to 274.1℃) was noticed for the mTiO2 filled fibers, suggesting their photocatalytic activity, while Tg was increased up to 20℃ for almost all fillers added to TPU, thus indicating lower molecular chain mobility upon UV radiation.

scholarly journals Recycling Waste Cotton Cloths for the Isolation of Cellulose Nanocrystals: A Sustainable Approach

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 626
Author(s):  
Siti Hajar Mohamed ◽  
Md. Sohrab Hossain ◽  
Mohamad Haafiz Mohamad Kassim ◽  
Mardiana Idayu Ahmad ◽  
Fatehah Mohd Omar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cellulose Nanocrystals ◽  
Value Added ◽  
Crystallinity Index ◽  
Attenuated Total Reflection ◽  
Cellulose Content ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Alkaline Pulping ◽  
Hydrolysis Of Cellulose

There is an interest in the sustainable utilization of waste cotton cloths because of their enormous volume of generation and high cellulose content. Waste cotton cloths generated are disposed of in a landfill, which causes environmental pollution and leads to the waste of useful resources. In the present study, cellulose nanocrystals (CNCs) were isolated from waste cotton cloths collected from a landfill. The waste cotton cloths collected from the landfill were sterilized and cleaned using supercritical CO2 (scCO2) technology. The cellulose was extracted from scCO2-treated waste cotton cloths using alkaline pulping and bleaching processes. Subsequently, the CNCs were isolated using the H2SO4 hydrolysis of cellulose. The isolated CNCs were analyzed to determine the morphological, chemical, thermal, and physical properties with various analytical methods, including attenuated total reflection-Fourier transform-infrared spectroscopy (ATR-FTIR), field-emission scanning electron microscopy (FE-SEM), energy-filtered transmission electron microscopy (EF-TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results showed that the isolated CNCs had a needle-like structure with a length and diameter of 10–30 and 2–6 nm, respectively, and an aspect ratio of 5–15, respectively. Additionally, the isolated CNCs had a high crystallinity index with a good thermal stability. The findings of the present study revealed the potential of recycling waste cotton cloths to produce a value-added product.

scholarly journals Effect of Glycero-(9,10-trioxolane)-trialeate on the Physicochemical Properties of Non-Woven Polylactic Acid Fiber Materials

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2517
Author(s):  
Anatoliy Olkhov ◽  
Olga Alexeeva ◽  
Marina Konstantinova ◽  
Vyacheslav Podmasterev ◽  
Polina Tyubaeva ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Polylactic Acid ◽  
Specific Surface Area ◽  
Water Sorption ◽  
Fiber Surface ◽  
High Water ◽  
Scanning Calorimetry ◽  
Fiber Mats ◽  
Fiber Materials

Biocompatible glycero (9,10-trioxolane) trioleate (ozonide of oleic acid triglyceride, OTOA) was incorporated into polylactic acid (PLA) fibers by electrospinning and nonwoven PLA mats with 1%, 3% and 5% OTOA content. The morphological, mechanical, thermal and water sorption properties of electrospun PLA mats after the addition of OTOA were studied. A morphological analysis showed that the addition of OTOA increased the average fiber diameter and induced the formation of pores on the fiber surface, leading to an increase in the specific surface area for OTOA-modified PLA fibrous mats. PLA fiber mats with 3% OTOA content were characterized by a highly porous surface morphology, an increased specific surface area and high-water sorption. Differential scanning calorimetry (DSC) was used to analyze the thermal properties of the fibrous PLA mats. The glass transition temperatures of the fibers from the PLA–OTOA composites decreased as the OTOA content increased, which was attributed to the plasticizing effect of OTOA. DSC results showed that OTOA aided the PLA amorphization process, thus reducing the crystallinity of the obtained nonwoven PLA–OTOA materials. An analysis of the mechanical properties showed that the tensile strength of electrospun PLA mats was improved by the addition of OTOA. Additionally, fibrous PLA mats with 3% OTOA content showed increased elasticity compared to the pristine PLA material. The obtained porous PLA electrospun fibers with the optimal 3% OTOA content have the potential for various biomedical applications such as drug delivery and in tissue engineering.

scholarly journals Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna
Keyword(s):  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Chemical Structures ◽  
Atomic Force ◽  
Polymeric Blends ◽  
Ft Ir ◽  
Acrylate Monomers ◽  
Synthesized Materials

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).

scholarly journals Silver Nanoparticles from Oregano Leaves’ Extracts as Antimicrobial Components for Non-Infected Hydrogel Contact Lenses

2021 ◽  
Vol 22 (7) ◽  
pp. 3539
Author(s):  
Anastasia Meretoudi ◽  
Christina N. Banti ◽  
Panagiotis K. Raptis ◽  
Christina Papachristodoulou ◽  
Nikolaos Kourkoumelis ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Contact Lenses ◽  
Attenuated Total Reflection ◽  
Bacterial Strains ◽  
Scanning Calorimetry ◽  
X Ray ◽  
E Coli ◽  
Polymer Hydrogels ◽  
20 Nm ◽  
And Staphylococcus Aureus

The oregano leaves’ extract (ORLE) was used for the formation of silver nanoparticles (AgNPs(ORLE)). ORLE and AgNPs(ORLE) (2 mg/mL) were dispersed in polymer hydrogels to give the pHEMA@ORLE_2 and pHEMA@AgNPs(ORLE)_2 using hydroxyethyl–methacrylate (HEMA). The materials were characterized by X-ray fluorescence (XRF) spectroscopy, X-ray powder diffraction analysis (XRPD), thermogravimetric differential thermal analysis (TG-DTA), derivative thermogravimetry/differential scanning calorimetry (DTG/DSC), ultraviolet (UV-Vis), and attenuated total reflection mode (ATR-FTIR) spectroscopies in solid state and UV–Vis in solution. The crystallite size value, analyzed with XRPD, was determined at 20 nm. The antimicrobial activity of the materials was investigated against Gram-negative bacterial strains Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli). The Gram-positive ones of the genus of Staphylococcus epidermidis (S. epidermidis) and Staphylococcus aureus (S. aureus) are known to be involved in microbial keratitis by the means of inhibitory zone (IZ), minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). The IZs, which developed upon incubation of P. aeruginosa, E. coli, S. epidermidis, and S. aureus with paper discs soaked in 2 mg/mL of AgNPs(ORLE), were 11.7 ± 0.7, 13.5 ± 1.9, 12.7 ± 1.7, and 14.3 ± 1.7 mm. When the same dose of ORLE was administrated, the IZs were 10.2 ± 0.7, 9.2 ± 0.5, 9.0 ± 0.0, and 9.0 ± 0.0 mm. The percent of bacterial viability when they were incubated over the polymeric hydrogel discs of pHEMA@AgNPs(ORLE)_2 was interestingly low (66.5, 88.3, 77.7, and 59.6%, respectively, against of P. aeruginosa, E. coli, S. epidermidis, and S. aureus) and those of pHEMA@ORLE_2 were 89.3, 88.1, 92.8, and 84.6%, respectively. Consequently, pHEMA@AgNPs(ORLE)_2 could be an efficient candidate toward the development of non-infectious contact lenses.

Synthesis of Amino-Functionalized Graphene Oxide/Azobenzene Polyimide and its Simulation of Optical Switches

2017 ◽  
Vol 231 (11-12) ◽  
Author(s):  
Tianlin Cao ◽  
Fanyu Zhao ◽  
Zulin Da ◽  
Fengxian Qiu ◽  
Dongya Yang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Near Infrared ◽  
Optical Switches ◽  
Attenuated Total Reflection ◽  
Functionalized Graphene ◽  
Visible Spectroscopy ◽  
Scanning Calorimetry ◽  
Functionalized Graphene Oxide ◽  
Uv Visible ◽  
532 Nm

AbstractIn this work, an amino-functionalized graphene oxide (AFGO) was synthesized by graphene oxide (GO) and ethylene diamine. A novel amino-functionalized graphene oxide/azobenzene polyimide (AFGO/ACPI) was synthesized with AFGO, azobenzene chromophore and pyromellitic dianhydride (PMDA). The structure, mechanical and thermal property of AFGO/ACPI were characterized and measured by fourier transform infrared, UV-visible spectroscopy, near-infrared spectrum, thermogravimetric analysis and differential scanning calorimetry. To obtain the refractive index of AFGO/ACPI at different temperature and wavelength (532 nm, 650 nm and 850 nm), the attenuated total reflection (ATR) method was used to measure, and thermo optic coefficients (dn/dT) were −7.22×10

Sign in / Sign up

Export Citation Format

Share Document