scholarly journals Effect of Thermal Conductive Fillers on the Flame Retardancy, Thermal Conductivity, and Thermal Behavior of Flame-Retardant and Thermal Conductive Polyamide 6

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4114 ◽  
Author(s):  
Fang Wang ◽  
Wenbo Shi ◽  
Yuliang Mai ◽  
Bing Liao
Keyword(s):  
Thermal Conductivity ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Combustion Process ◽  
Polyamide 6 ◽  
Gravimetric Analysis ◽  
Limiting Oxygen Index ◽  
Conductive Fillers ◽  
Ul 94 ◽  
The Impact

In this work, polyamide 6 (PA6) composites with improved flame retardancy and thermal conductivity were prepared with different thermal conductive fillers (TC fillers) such as aluminum nitride (AlN) and boron nitride (BN) in a PA6 matrix with aluminum diethylphosphinate (AlPi) as a fire retardant. The resultant halogen-free flame retardant (HFFR) and thermal conductive (TC) PA6 (HFFR-TC-PA6) were investigated in detail with a mechanical property test, a limiting oxygen index (LOI), the vertical burning test (UL-94), a cone calorimeter, a thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of the impact fracture surface and char residue of the composites were analyzed by scanning electron microscopy (SEM). It was found that the thermal conductivity of the HFFR-TC-PA6 composite increased with the amount of TC fillers. The TC fillers exerted a positive effect for flame retardant PA6. For example, the HFFR-TC-PA6 composites with the thickness of 1.6 mm successfully passed the UL-94 V-0 rating with an LOI of more than 29% when the loading amount of AlN-550RFS, BN-SW08 and BN-NW04 was 30 wt%. The morphological structures of the char residues revealed that TC fillers formed a highly integrated char layer surface (without holes) during the combustion process, as compared to that of flame retardant PA6/AlPi composites. In addition, the thermal stability and crystallization behavior of the composites were studied.

The effect of boric acid on flame retardancy of intumescent flame retardant polypropylene composites including nanoclay

2021 ◽  
pp. 089270572110523
Author(s):  
Yasin Demirhan ◽  
Recep Yurtseven ◽  
Nazım Usta
Keyword(s):  
Thermal Conductivity ◽  
Boric Acid ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Boron Oxide ◽  
Experimental Studies ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Ul 94

In this study, different amounts of boric acid (BA, 1.25, 2.5, 3.75 and 5.0 wt%) were used to enhance the effectiveness of an intumescent flame retardant (IFR) system composed of ammonium polyphosphate (APP) and pentaerythritol (PER) in polypropylene (PP) including 2 wt% montmorillonite nanoclay (MMT). Meanwhile, metaboric acid and boron oxide which were generated by the decomposition of BA appeared in the melt compounding and the burning processes, respectively. Extensive experimental studies were performed to investigate the effects of BA/boron oxide and MMT combinations on the properties of PP/IFR. The fire resistances of the composites were studied by UL 94, limiting oxygen index (LOI) and cone calorimetry tests. The thermal properties were determined by using thermogravimetric analysis, differential scanning calorimetry and thermal conductivity measurements. In addition, the mechanical properties of the composites were examined. The experimental results revealed that although the additions of 1.25 and 2.5 wt% BA with 2 wt% MMT significantly enhanced thermal and flame resistances of PP composites, 3.75 and 5.0 wt% BA additions generated antagonistic effects and deteriorated the fire resistance of the composites. The sample including 2.5 wt% BA addition achieved the best flame retardancy. The LOI value was increased from 18 to 31% with UL 94 V-0 rating. In addition, the peak heat release rate was reduced from 668.6 to 150.0 kW/m2 and the total heat release value was decreased from 247.9 to 98.4 MJ/m2. In the meantime, the thermal conductivity was increased from 0.22 up to 0.28 W/mK. Furthermore, CO, CO2 and the smoke productions were significantly decreased with respect to PP. NO generation was decreased with BA replacements. At the same time, although there was a slight decrease in the tensile strength, the flexural strength significantly increased with BA and MMT additions.

scholarly journals Preparation and properties of flame-retardant epoxy resins containing reactive phosphorus flame retardant

2020 ◽  
Vol 15 ◽  
pp. 155892502090132
Author(s):  
Sang-Hoon Lee ◽  
Seung-Won Oh ◽  
Young-Hee Lee ◽  
Il-Jin Kim ◽  
Dong-Jin Lee ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Epoxy Resins ◽  
Phosphorus Content ◽  
Phosphorus Compound ◽  
Phosphorus Compounds ◽  
Limiting Oxygen Index ◽  
The Impact

To prepare flame-retardant epoxy resin, phosphorus compound containing di-hydroxyl group (10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ) was reacted with uncured epoxy resin (diglycidyl ether of bisphenol A, YD-128) and then cured using a curing agent (dicyandiamide, DICY). This study focused on the effect of phosphorus compound/phosphorus content on physical properties and flame retardancy of cured epoxy resin. The thermal decomposition temperature of the cured epoxy resins (samples: P0, P1.5, P2.0, and P2.5, the number represents the wt% of phosphorus) increased with increasing the content of phosphorus compound/phosphorus (0/0, 19.8/1.5, 27.8/2.0, and 36.8/2.5 wt%) based on epoxy resin. The impact strength of the cured epoxy resin increased significantly with increasing phosphorus compound content. As the phosphorus compound/phosphorus content increased from 0/0 to 36.8/2.5 wt%, the glass transition temperature (the peak temperature of loss modulus curve) increased from 135.2°C to 142.0°C. In addition, as the content of phosphorous compound increased, the storage modulus remained almost constant up to higher temperature. The limiting oxygen index value of cured epoxy resin increased from 21.1% to 30.0% with increasing phosphorus compound/phosphorus content from 0/0 to 36.8/2.5 wt%. The UL 94 V test result showed that no rating for phosphorus compounds less than 19.8 wt% and V-1 for 27.8 wt%. However, when the phosphorus compound was 36.8 wt%, the V-0 level indicating complete flame retardancy was obtained. In conclusion, the incorporation of phosphorus compounds into the epoxy chain resulted in improved properties such as impact strength and heat resistance, as well as a significant increase in flame retardancy.

Enhanced thermal conductivity and flame retardancy of polyamide 6/flame retardant composites with hexagonal boron nitride

2018 ◽  
Vol 38 (8) ◽  
pp. 767-774 ◽  
Author(s):  
Liang Wang ◽  
Luchong Zhang ◽  
Andreas Fischer ◽  
Yuhua Zhong ◽  
Dietmar Drummer ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Boron Nitride ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
High Performance ◽  
Heat Dissipation ◽  
Hexagonal Boron Nitride ◽  
Light Emitting Diode ◽  
Polyamide 6 ◽  
Twin Screw

Abstract High performance composite of polyamide 6 (PA6)/flame retardant (FR)/hexagonal boron nitride (hBN) was prepared via twin screw extrusion, followed by injection molding. The heat dissipation of the composite was significantly improved by incorporating 40 vol% of hBN, and the corresponding thermal conductivity was up to 5.701 W/(m·K), nearly 17 times that of the PA6/FR composites. In addition, the combination effect of hBN and FR to the flame retardancy of the composites was observed, and the addition of hBN could dramatically enhance the flame retardancy of composites, achieving a UL94 V-0 rating with a limited oxygen index (LOI) value of 37%. This multifunctional modification would broaden the application field of PA6 composites in light-emitting diode (LED) lamps, electronic products, and so on.

Flame Retardant Effect of a Modified Intumescent Flame Retardant on a Rigid Polyurethane Foam

2017 ◽  
Vol 748 ◽  
pp. 51-54
Author(s):  
Pei Bang Dai ◽  
Lin Ying Yang ◽  
Ting Zheng ◽  
Chang Qin ◽  
Qi Chen Tang
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Composite Foam ◽  
Composite Foams ◽  
Suitable Amount ◽  
Ul 94 ◽  
Pu Foams

A rigid polyurethane (PU) flame retardant composite foam was prepared by the compounding of polyols and diisocyanates with a modified intumescent flame retardant (MIFR). The MIFR was based on the three components of intumescent flame retardant normally used and was modified in a surfactant TX-10 solution. The flame retardancy of the PU flame retardant composite foams were evaluated by using the limiting oxygen index (LOI), the UL-94 (vertical flame) test and scanning electron microscopy (SEM). When MIFR was fixed at 20.0 wt% in PU/MIFR composite foams, the MIFR could enhance the flame retardancy and pass V-0 rating of UL-94 test. The microstructures observed by SEM demonstrate that a suitable amount of MIFR can promote formation of compact intumescent charred layers in PU foams.

Nacre-mimetic CH/MMT fabrication coating on PET fabric for improving anti-dripping performance

2020 ◽  
Vol 32 (6) ◽  
pp. 803-812
Author(s):  
Yinchun Fang ◽  
Xinhua Liu ◽  
Wenqing Fei
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Thermo Gravimetric Analysis ◽  
Original Research ◽  
Gravimetric Analysis ◽  
Experimental Basis ◽  
Limiting Oxygen Index ◽  
Content Type ◽  
Pet Fabric ◽  
Assembly Method

PurposePET fiber is widely used in many fields, such as clothing and decorative materials. However, the high flammability and dripping problem restrict its applications. It is vital for PET fiber to overcome these two main drawbacks for practical applications.Design/methodology/approachIn this paper nacre-mimetic flame retardant coating of chitosan (CH) and Montmorillonite (MMT) was fabricated on PET fabrics through the layer-by-layer assembly method. The flame retardancy and anti-dripping performance of the treated PET fabric were investigated.FindingsThe results of limiting oxygen index (LOI) value and vertical burning test revealed the anti-dripping performance of PET fabrics which was greatly improved, while the flame retardancy has not been improved. The dripping phenomena was eliminated when the CH/MMT bilayers were over 5 BL. Thermo gravimetric analysis (TGA) results revealed that nacre-mimetic coated CH/MMT bilayers on PET fabrics would promote the char formation both under nitrogen atmosphere and under air atmosphere indicating the obviously condensed phase flame retardant action. scanning electron microscopy (SEM) images of the char residues revealed that coated PET fabrics would promote the formation of char.Research limitations/implicationsHowever, the char was an unstable char which would further combust to change the thermal degradation and combustion process of PET fabric. Though PET fabric coated by this CH/MMT nacre-mimetic system had no flame retardancy, the anti-dripping performance was greatly improved. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic materials.Originality/valueThis research is the original research for the flame retardant treatment by fabrication nacre-mimetic CH/MMT coating on PET fabric, which has not been reported previously. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic polymer fabrics.

Synthesis and characterisation of the halogen-free flame retardant and mechanical performance of the retardant epoxies resin

2017 ◽  
Vol 46 (3) ◽  
pp. 172-180 ◽  
Author(s):  
Bing Liang ◽  
Jiao Lv ◽  
Gang Wang ◽  
Tsubaki Noritatsu
Keyword(s):  
Flame Retardant ◽  
Mechanical Performance ◽  
Cyanuric Chloride ◽  
Proton Nuclear Magnetic Resonance ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
Content Type ◽  
Ul 94 ◽  
Halogen Free ◽  
The Impact

Purpose The purpose of this paper is to prepare a novel halogen-free intumescent flame retardant (IFR) BHPPODC (benzene hydroquinone phosphorous oxy dichloride cyanuric chloride) for application to epoxy resin (EP) and study their mechanical and flame-retardant performance. Design/methodology/approach The IFR was synthesised by phenylphosphonic dichloride, hydroquinone and cyanuric chloride via solvent reaction, and the structure was fully characterised by proton nuclear magnetic resonance (1H-NMR), mass spectrometry (MS) and Fourier transform infrared (FT-IR) spectroscopy. The thermal stability, mechanical and flame properties and morphology of the char layer of the flame-retardant EP was investigated by using thermogravimetric analysis (TGA), tensile and Charpy impact tests, limiting oxygen index (LOI) and vertical burning test (UL-94) and scanning electron microscopy (SEM). Findings Results of the LOI indicated that the halogen-free flame retardant as an additive exhibits very good flame-retardant effects. The results showed that the addition of IFR improved the flame resistance properties of epoxies resin composites, and the residual char ratio at 800°C significantly increased. Research limitations/implications The IFR can be prepared successfully and can improve the flame-retardant performance. Practical implications This contribution can provide a high flame retardant performance and has minimal impact on the mechanical performance of the BHPPODC/EP composition. Originality/value This study showed that flame-retardant BHPPODC has an effective flame effect under optimal conditions. When the 12 Wt.% IFR was added to the EP, the LOI was 29.1 and the UL-94 rank can reach V-0 rank, the tensile strength was 83.86 MPa and the impact strength was 8.82 kJ/m2.

scholarly journals PREPARATION OF IRON- REDUCED GRAPHENE OXIDE/ EPOXY RESIN COMPOSITE AND ITS FLAME RETARDANCY AND THERMAL STABILITY

10.6036/10327 ◽  
2022 ◽  
Vol 97 (1) ◽  
pp. 98-103
Author(s):  
XIAN WANG ◽  
JINLONG ZHUO ◽  
TIANQING XING ◽  
Xingran Wang
Keyword(s):  
Thermal Stability ◽  
Graphene Oxide ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Iron Powder ◽  
Flame Retardancy ◽  
Limiting Oxygen Index ◽  
Cone Calorimeter Test ◽  
Industrial Manufacture ◽  
Ul 94

In order to reduce flammability, smoke release and enhance thermal stability of epoxy resin (EP), iron powder is mixed with graphene oxide/ epoxy resin (GO/EP) composite by mechanical blending. The combustion performance of composite material is investigated through limiting oxygen index (LOI), Underwriters Laboratory (UL)-94 test, and cone calorimeter test (CCT). Thermogravimetric-Fourier transform infrared spectroscopy (TG-FTIR) and scanning electron microscope (SEM) are also used to explore the mechanism of flame retardancy and smoke suppression. Results show that, with the addition of 0.5% mass fraction of GO and the corresponding iron powder combination (EP3 sample), the LOI value can achieve 32.5% while reaching the UL-94 V0 rating. Compare with EP0, the peaks of heat release rate, smoke production rate, and smoke factor values of EP3 are decreased by 42%, 60%, and 50%, respectively. The char and TG-FTIR data of EP3 reveal that it has a more compact structure, good thermal stability, and produce fewer toxic gases and smoke. Reduction of GO could inhibit the degradation of EP, and iron catalyzes the formation of carbonaceous char on the surface. Thus, the thermal stability and flame retardancy of EP are improved significantly. This study provides a suitable way to prepare graphene/EP composites that contain iron catalyst and can be extended to the industrial manufacture of flame retardant polymer composites. Keywords: iron powder; epoxy resin; graphene oxide; flame retardant; thermal stability

The synergistic flame retardancy of modified expandable graphite and metal hydroxides on HDPE/EVA composites

2020 ◽  
pp. 089270572092513
Author(s):  
Xincheng Guo ◽  
Nian Liu ◽  
Lingtong Li ◽  
Zhuyu Bai ◽  
Xiaolang Chen ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardancy ◽  
Synergistic Effects ◽  
Zinc Borate ◽  
Expandable Graphite ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Limiting Oxygen Index ◽  
Cone Calorimeter Test ◽  
Ul 94

In this article, the flammable behaviors and synergistic effects of modified expanded graphite (MEG) with zinc borate (ZB) on flame-retardant high-density polyethylene/ethylene vinyl acetate (HDPE/EVA) composites containing magnesium hydroxide (MH) and aluminum hydroxide (ATH) are investigated by the Underwriters Laboratories-94 (UL-94) test, limiting oxygen index (LOI), cone calorimeter test (CCT), thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR), differential scanning calorimetry, and tensile tests. The LOI, UL-94, and CCT results show that the synergistic effect of MEG and ZB can improve the flame retardancy of the composites. With the addition of ZB and MEG, the LOI value increases, and the UL-94 reaches the V-0 rating. The heat release rate and total heat release decrease, respectively. The data obtained from the TGA indicate that the synergistic effects of ZB with MEG increase the decomposition temperature when 2 phr ZB and 8 phr MEG are added into the composites. The data from FTIR show that HMEG8 and HMEG10 composites produce phosphate at high temperatures, which promotes the formation of stable and compact charred layer. All the results show that ZB and MEG have positive synergistic effects on HDPE/EVA composites containing MH and ATH. However, ZB and MEG play a negative role in the tensile properties of the HDPE/EVA composites.

scholarly journals Flame-Retardant Performance of Transparent and Tensile-Strength-Enhanced Epoxy Resins

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 317 ◽  
Author(s):  
Liang Li ◽  
Zaisheng Cai
Keyword(s):  
Tensile Strength ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Epoxy Resins ◽  
Diglycidyl Ether ◽  
Laser Raman Spectroscopy ◽  
Limiting Oxygen Index ◽  
Laser Raman ◽  
Ul 94 ◽  
Amine Curing

In this study, a flame-retardant additive with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) groups denoted DSD was successfully synthesized from DOPO, 4,4′-diaminodiphenyl sulfone (DDS), and salicylaldehyde. The chemical structure of DSD was characterized by FTIR–ATR, NMR, and elemental analysis. DSD was used as an amine curing agent, and the transparent, tensile strength-enhanced epoxy resins named EP–DSD were prepared via thermal curing reactions among the diglycidyl ether of bisphenol A (DGEBA), 4,4′-diaminodiphenylmethane (DDM), and DSD. The flame-retardancy of composites was studied by the limiting oxygen index (LOI) and UL-94 test. The LOI values of EP–DSD composites increased from 30.7% for a content of 3 wt % to 35.4% for a content of 9 wt %. When the content of DSD reached 6 wt %, a V-0 rating under the UL-94 vertical test was achieved. SEM photographs of char residues after the UL-94 test indicate that an intumescent and tight char layer with a porous structure inside was formed. The TGA results revealed that EP–DSD thermosets decomposed ahead of time. The graphitization degree of the residual chars was also investigated by laser Raman spectroscopy. The measurement of tensile strength at breaking point shows that the loading of DSD increases the tensile strength of epoxy thermosets. Py-GC/MS analysis shows the presence of phosphorus fragments released during EP–DSD thermal decomposition, which could act as free radical inhibitors in the gas phase. Owing to the promotion of the formation of intumescent and compact char residues in the condensed phase and nonflammable phosphorus fragments formed from the decomposition of DOPO groups, EP–DSD composites displayed obvious flame-retardancy.

Epoxy resin/cyanate ester composites containing DOPO and wollastonite with simultaneously improved flame retardancy and thermal resistance

2020 ◽  
Vol 32 (6) ◽  
pp. 710-718
Author(s):  
Zhengzhou Wang ◽  
Xin Gao ◽  
Wenfeng Li
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Thermal Studies ◽  
Cyanate Ester ◽  
Total Heat Release ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
Ul 94

Flame-retardant epoxy (EP) resin/cyanate ester (CE) composites were prepared with 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) and wollastonite (Wo). The combustion behavior of the flame-retardant EP/CE composites was investigated by limiting oxygen index (LOI), UL-94, and cone calorimeter tests. It is found that the EP/CE composite containing 7 wt% DOPO and 3 wt% Wo (sample 7DO/3Wo/EP/CE) exerts the best flame retardancy (LOI 35.5% and UL-94 V-0 rating). The peak heat release rate and total heat release of sample 7DO/3Wo/EP/CE increase slightly, while total smoke release decreases about 14% compared with the EP/CE composite containing 10 wt% DOPO (sample 10DO/EP/CE). Thermal studies indicate that the glass transition temperature and temperature at 5% mass loss of sample 7DO/3Wo/EP/CE are higher than that of sample 10DO/EP/CE. Moreover, the mechanical properties of EP/CE composites were investigated.

Sign in / Sign up

Export Citation Format

Share Document