scholarly journals Critical Assessment of Techniques for the Description of the Phase Composition of Advanced High-Strength Steels

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4033 ◽  
Author(s):  
Anna Knaislová ◽  
Darya Rudomilova ◽  
Pavel Novák ◽  
Tomáš Prošek ◽  
Alena Michalcová ◽  
...  
Keyword(s):  
Phase Composition ◽  
Retained Austenite ◽  
Density Ratio ◽  
High Strength Steels ◽  
High Strength ◽  
Advanced Characterization ◽  
Minor Amount ◽  
Advanced High Strength Steels ◽  
Steel Grades ◽  
A Minor

The phase composition and portion of individual phases in advanced high-strength steels (AHSS) CP1000 and DP1000 was studied by complementary microscopic and diffraction techniques. CP1000 and DP1000 steel grades have a high strength-to-density ratio and they are used in many applications in the automotive industry. The microstructure of the CP1000 “complex phase” steel consists of ferrite, bainite, martensite and a small amount of retained austenite. DP1000 is a dual phase steel, which has a structure of a ferritic matrix with islands of martensite and a minor amount of retained austenite. The influence of selected etchants (Nital, LePera, Beraha I, Nital followed by metabisulfite, Nital followed by LePera, and Nital followed by Beraha I) on the microstructure image is described. X-ray diffraction, neutron diffraction and light optical, scanning and transmission electron microscopy were used in this work for advanced characterization of the microstructure and phase composition. The information provided by each technique is critically compared.

scholarly journals Heat Treatment Design for a QP Steel: Effect of Partitioning Temperature

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1136
Author(s):  
Marcel Carpio ◽  
Jessica Calvo ◽  
Omar García ◽  
Juan Pablo Pedraza ◽  
José María Cabrera
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
Tensile Tests ◽  
Quenching Temperature ◽  
Advanced High Strength Steels ◽  
New Family ◽  
Automotive Parts ◽  
Fresh Martensite ◽  
Industry Needs

Designing a new family of advanced high-strength steels (AHSSs) to develop automotive parts that cover early industry needs is the aim of many investigations. One of the candidates in the 3rd family of AHSS are the quenching and partitioning (QP) steels. These steels display an excellent relationship between strength and formability, making them able to fulfill the requirements of safety, while reducing automobile weight to enhance the performance during service. The main attribute of QP steels is the TRIP effect that retained austenite possesses, which allows a significant energy absorption during deformation. The present study is focused on evaluating some process parameters, especially the partitioning temperature, in the microstructures and mechanical properties attained during a QP process. An experimental steel (0.2C-3.5Mn-1.5Si (wt%)) was selected and heated according to the theoretical optimum quenching temperature. For this purpose, heat treatments in a quenching dilatometry and further microstructural and mechanical characterization were carried out by SEM, XRD, EBSD, and hardness and tensile tests, respectively. The samples showed a significant increment in the retained austenite at an increasing partitioning temperature, but with strong penalization on the final ductility due to the large amount of fresh martensite obtained as well.

scholarly journals Effect of Quenching and Partitioning Temperatures in the Q-P Process on the Properties of AHSS with Various Amounts of Manganese and Silicon

2012 ◽  
Vol 706-709 ◽  
pp. 2734-2739 ◽  
Author(s):  
Hana Jirková ◽  
Ludmila Kučerová ◽  
Bohuslav Mašek
Keyword(s):  
Tensile Strength ◽  
Retained Austenite ◽  
Isothermal Holding ◽  
Bainitic Ferrite ◽  
High Strength Steels ◽  
High Strength ◽  
Experimental Program ◽  
Quenching Temperature ◽  
Quenching And Partitioning ◽  
Advanced High Strength Steels

The use of the combined influence of retained austenite and bainitic ferrite to improve strength and ductility has been known for many years from the treatment of multiphase steels. Recently, the very fine films of retained austenite along the martensitic laths have also become the centre of attention. This treatment is called the Q-P process (quenching and partitioning). In this experimental program the quenching temperature and the isothermal holding temperature for diffusion carbon distribution for three advanced high strength steels with carbon content of 0.43 % was examined. The alloying strategies have a different content of manganese and silicon, which leads to various martensite start and finish temperatures. The model treatment was carried out using a thermomechanical simulator. Tested regimes resulted in a tensile strength of over 2000MPa with a ductility of above 14 %. The increase of the partitioning temperature influenced the intensity of martensite tempering and caused the decrease of tensile strength by 400MPa down to 1600MPa and at the same time more than 10 % growth of ductility occurred, increasing it to more than 20%.

Influence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free Steel

2016 ◽  
Vol 879 ◽  
pp. 867-872 ◽  
Author(s):  
M.C. Taboada ◽  
I. Gutiérrez ◽  
D. Jorge-Badiola ◽  
S.M.C. van Bohemen ◽  
F. Hisker ◽  
...  
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
High Volume ◽  
X Ray Diffraction ◽  
Tempered Martensite ◽  
Trip Steels ◽  
Volume Fractions ◽  
Advanced High Strength Steels ◽  
Processing Variables

New trends focused on achieving higher performance steels has led to a so-called 3rd Generation Advanced High Strength Steels (AHSS), in which the typical polygonal ferrite found in TRIP steels as a matrix phase is replaced by harder phases as Carbide-Free Bainite (CFB) and/or (tempered) martensite. Besides, large volume fractions of retained austenite (R.A.) with adequate stability are aimed for to improve the formability of the steels. Si containing steels are regarded as the most suitable to retard cementite formation and consequently reach high volume fractions of RA. In this work, CFB annealing schedules were applied to dilatometer samples of Fe-0.22C-2.0Mn-1.3Si. The overaging temperature TB was varied between 390 oC and 480 oC, and other processing variables investigated were the austenitizing temperature Taus, and the overaging holding time tB. The annealed samples analyzed with LOM, FEG-SEM, EBSD and X-ray diffraction techniques show that markedly different complex microstructures made up of bainite, ferrite, MA phase and retained austenite (R.A) are accomplished depending on the specific thermal cycle. These results are described in detail and discussed in relation to the dilatometry measurements.

scholarly journals Substructure Development and Damage Initiation in a Carbide-Free Bainitic Steel upon Tensile Test

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1261
Author(s):  
Mari Carmen Taboada ◽  
Amaia Iza-Mendia ◽  
Isabel Gutiérrez ◽  
Denis Jorge-Badiola
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
Tensile Tests ◽  
Formation Mechanisms ◽  
Tempered Martensite ◽  
Damage Initiation ◽  
Advanced High Strength Steels ◽  
Significant Strength ◽  
The Stability

Carbide-free bainitic (CFB) steels belong to the family of advanced high strength steels (AHSS) that are struggling to become part of the third-generation steels to be marketed for the automotive industry. The combined effects of the bainitic matrix and the retained austenite confers a significant strength with a remarkable ductility to these steels. However, CFB steels usually show much more complex microstructures that also contain MA (Martensite–Austenite) phase and auto-tempered martensite (ATM). These phases may compromise the ductility of CFB steels. The present work analyzes the substructure evolution during tensile tests in the necking zone, and deepens into the void and crack formation mechanisms and their relationship with the local microstructure. The combination of FEG-SEM imaging, EBSD, and X-ray diffraction has been necessary to characterize the substructure development and damage initiation. The bainite matrix has shown great ductility through the generation of high angle grain boundaries and/or large orientation gradients around voids, which are usually found close to the bainite and MA/auto-tempered martensite interfaces or fragmenting the MA phase. Special attention has been paid to the stability of the retained austenite (RA) during the test, which may eventually be transformed into martensite (Transformation Induced Plasticity, or TRIP effect).

scholarly journals Enhancing the Mechanical Properties of a Hot Rolled High-Strength Steel Produced by Ultra-Fast Cooling and Q&P Process

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 958 ◽  
Author(s):  
Teng Wu ◽  
Run Wu ◽  
Bin Liu ◽  
Wen Liang ◽  
Deqing Ke
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
Controlled Rolling ◽  
Grain Structure ◽  
Ultra Fast Cooling ◽  
Advanced High Strength Steels ◽  
Fast Cooling ◽  
Austenite Grains ◽  
Hot Rolled

The quenching and partitioning (Q&P) process of advanced high strength steels results in a significant enhancement in their strength and ductility. The development of controlled rolling and cooling technology provides an efficient tool for microstructural design in steels. This approach allows to control phase transformations in order to generate the desired microstructure in steel and, thus, to achieve the required properties. To refine grain structure in a Fe-Si-Mn-Nb steel and to generate the microstructure consisting of martensitic matrix with embedded retained austenite grains, hot rolling and pressing combined with ultrafast cooling and Q&P process is employed. The slender martensite in hot rolled Q&P steel improves the strength of test steel and the flake retained austenite improves the plasticity and work hardening ability through the Transformation Induced Plasticity (TRIP) effect.

Quenching and Partitioning of Ni-Added High Strength Steels

2007 ◽  
Vol 539-543 ◽  
pp. 4476-4481 ◽  
Author(s):  
F.C. Rizzo ◽  
A.R. Martins ◽  
John G. Speer ◽  
David K. Matlock ◽  
A. Clarke ◽  
...  
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
Processing Parameters ◽  
Carbide Formation ◽  
X Ray Diffraction ◽  
Quenching And Partitioning ◽  
Steel Microstructure ◽  
Advanced High Strength Steels ◽  
Treatment Procedures

High strength steels containing significant fractions of retained austenite have been developed in recent years, and are the subject of growing commercial interest when associated with the TRIP phenomenon during deformation. A new process concept “quenching and partitioning” (Q&P) has been proposed by CSM/USA, and the results show the potential to create a new kind of steel microstructure with controlled amounts of retained austenite, enriched by carbon partitioning. Four steels containing C, Si, Mn, Ni, Cr and Mo, were designed with variation in the Ni and C content, aiming to decrease Bs temperature and to suppress carbide formation during the partitioning treatment. Several heat-treatment procedures were performed in specimens previously machined for tensile testing, while x-ray diffraction was used to determine the fraction of retained austenite. The tensile test results showed that except for the high C high Ni alloy, most of the processing conditions resulted in strengths superior to those of advanced high strength steels (AHSS), although it is importantly recognized that higher alloy additions were used in this study, in comparison with conventional AHSS grades.. A variety of strength and ductility combinations were observed, confirming the potential of the Q&P process and illustrating the strong influence of the final microstructure on the mechanical properties. Experimental results for samples partitioned at 400 °C indicate that higher ultimate tensile strength is associated with higher fraction of retained austenite for multiple heat treatments of each alloy investigated. The amount of retained austenite obtained was generally lower than that predicted by the model. Further studies are in progress to understand the influence of alloying and processing parameters (time/temperature) on the partitioning of carbon and precipitation of transition carbides.

scholarly journals Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels

2020 ◽  
Vol 51 (11) ◽  
pp. 5517-5586 ◽  
Author(s):  
Dierk Raabe ◽  
Binhan Sun ◽  
Alisson Kwiatkowski Da Silva ◽  
Baptiste Gault ◽  
Hung-Wei Yen ◽  
...  
Keyword(s):  
Recent Progress ◽  
High Strength Steels ◽  
High Strength ◽  
Advanced Characterization ◽  
Critical Discussion ◽  
Press Hardening ◽  
Advanced High Strength Steels ◽  
Bainitic Steels ◽  
Challenges And Opportunities ◽  
Recent Developments

Abstract This is a viewpoint paper on recent progress in the understanding of the microstructure–property relations of advanced high-strength steels (AHSS). These alloys constitute a class of high-strength, formable steels that are designed mainly as sheet products for the transportation sector. AHSS have often very complex and hierarchical microstructures consisting of ferrite, austenite, bainite, or martensite matrix or of duplex or even multiphase mixtures of these constituents, sometimes enriched with precipitates. This complexity makes it challenging to establish reliable and mechanism-based microstructure–property relationships. A number of excellent studies already exist about the different types of AHSS (such as dual-phase steels, complex phase steels, transformation-induced plasticity steels, twinning-induced plasticity steels, bainitic steels, quenching and partitioning steels, press hardening steels, etc.) and several overviews appeared in which their engineering features related to mechanical properties and forming were discussed. This article reviews recent progress in the understanding of microstructures and alloy design in this field, placing particular attention on the deformation and strain hardening mechanisms of Mn-containing steels that utilize complex dislocation substructures, nanoscale precipitation patterns, deformation-driven transformation, and twinning effects. Recent developments on microalloyed nanoprecipitation hardened and press hardening steels are also reviewed. Besides providing a critical discussion of their microstructures and properties, vital features such as their resistance to hydrogen embrittlement and damage formation are also evaluated. We also present latest progress in advanced characterization and modeling techniques applied to AHSS. Finally, emerging topics such as machine learning, through-process simulation, and additive manufacturing of AHSS are discussed. The aim of this viewpoint is to identify similarities in the deformation and damage mechanisms among these various types of advanced steels and to use these observations for their further development and maturation.

Application of Advanced Multiphase Steels in Crashworthiness Structures: Experimental Study and Constitutive Equations

2006 ◽  
Vol 514-516 ◽  
pp. 579-583 ◽  
Author(s):  
Nuno Peixinho ◽  
António Pinho
Keyword(s):  
Constitutive Equations ◽  
Tensile Testing ◽  
High Strength Steels ◽  
High Strength ◽  
Experimental Program ◽  
Dual Phase ◽  
Strain Rates ◽  
Trip Steels ◽  
Advanced High Strength Steels ◽  
Steel Grades

This work presents results of tensile testing of advanced high strength steels of interest for crashworthy structures: Dual-Phase and TRIP (Transformation Induced Plasticity) steels. The improvements in vehicle crashworthiness observed in recent years have been closely linked to advanced high-strength steels that are currently being produced or in process of development. Amongst these, Dual-Phase and TRIP steels have presented excellent properties for use in crashworthy structures. For these steel grades an understanding of material behaviour at relevant strain rates is needed as well as constitutive equations suitable for use in analytic and numerical calculations. For that purpose an experimental program of tensile testing was performed in a range of strain rates of interest for crashworthiness problems: 0.0001 /s to 1000 /s. The test results were used to compare material properties and to evaluate the Cowper-Symonds constitutive equation and a modified version. Crush tests were performed at different speeds for top-hat and hexagonal tubes manufactured using laser welding and the results discussed in view of energy absorption.

Influence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength Steels

2016 ◽  
Vol 879 ◽  
pp. 217-223 ◽  
Author(s):  
Marion Bellavoine ◽  
Myriam Dumont ◽  
Josée Drillet ◽  
Philippe Maugis ◽  
Véronique Hebert
Keyword(s):  
High Strength Steels ◽  
High Strength ◽  
Solute Drag ◽  
Dual Phase ◽  
Comparative Efficiency ◽  
Advanced High Strength Steels ◽  
Steel Grades ◽  
Cold Rolled ◽  
Microalloying Elements ◽  
Predominant Effect

Microalloying elements Ti and Nb are commonly added to high-strength Dual Phase steels as they can provide efficient means for additional strengthening due to grain refinement and precipitation strengthening mechanisms. In the form of solute elements or as fine carbonitride precipitates, Ti and Nb are also expected to have a significant effect on the microstructural changes during annealing and especially on recrystallization kinetics. The present work investigates the influence of microalloying elements Ti and Nb on recrystallization in various cold-rolled Dual Phase steel grades with the same initial microstructure but different microalloying contents. Using complementary experimental and modeling approaches makes it possible to give some clarifications regarding both the nature of this effect and the comparative efficiency of Ti and Nb on delaying recrystallization. It is shown that niobium is the most efficient micro-alloying element to impede recrystallization and that the predominant effect is solute drag.

scholarly journals Addressing Retained Austenite Stability in Advanced High Strength Steels

2013 ◽  
Vol 738-739 ◽  
pp. 212-216 ◽  
Author(s):  
Elena V. Pereloma ◽  
Azdiar A. Gazder ◽  
Ilana B. Timokhina
Keyword(s):  
Retained Austenite ◽  
Mechanical Stability ◽  
Volume Fraction ◽  
High Strength Steels ◽  
High Strength ◽  
Processing Parameters ◽  
Advanced High Strength Steels ◽  
Austenite Stability ◽  
Retained Austenite Stability ◽  
Size And Morphology

Advances in the development of new high strength steels have resulted in microstructures containing significant volume fractions of retained austenite. The transformation of retained austenite to martensite upon straining contributes towards improving the ductility. However, in order to gain from the above beneficial effect, the volume fraction, size, morphology and distribution of the retained austenite need to be controlled. In this regard, it is well known that carbon concentration in the retained austenite is responsible for its chemical stability, whereas its size and morphology determines its mechanical stability. Thus, to achieve the required mechanical properties, control of the processing parameters affecting the microstructure development is essential.

Sign in / Sign up

Export Citation Format

Share Document