scholarly journals Influence of Dental Composite Viscosity in Attachment Reproduction: An Experimental in Vitro Study

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4001
Author(s):  
Vincenzo D’Antò ◽  
Simone Muraglie ◽  
Beatrice Castellano ◽  
Ettore Candida ◽  
Maria Francesca Sfondrini ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Dental Composite ◽  
Maximum Deviation ◽  
Force System ◽  
Maximum Value ◽  
Significant Difference ◽  
The Difference ◽  
Level Of Significance ◽  
The Ideal

Background: Attachments are composite auxiliaries that are used during a clear aligner orthodontic therapy to achieve difficult tooth movements. Two important factors are the planned configuration and the actual position of these auxiliary elements to obtain the desired force system. The aim of the present study was to evaluate the role of different composite materials in the correct reproduction of attachment shape and position. Methods: The materials that were considered in the study were a flowable resin, a dental restorative material, and an orthodontic composite. The attachments were created on three models of extracted teeth. Once the impressions were performed, 25 attachments of different shapes were added onto each virtual model to obtain the necessary templates to make the attachments. Each tested material was used to create a set of 25 attachments that were then scanned with an accuracy of 10μm. The resultant STL (stereolithography) files were superimposed onto the ones from the initial virtual plan, through Geomagic software, and the aligned scans were then compared while using a color map. The parameters that were calculated to make a comparison between the created attachments and the ideal ones were the maximum deviation in defect and in excess, the overflow, and the volume’s difference. In addition to these measurements comparing the three above-mentioned groups, the difference in volume between all the ideal and realized samples were analyzed. To test for differences among the three groups, a one-way Analysis of variance (ANOVA) was used with a Bonferroni post-hoc test. The level of significance was set at p < 0.05. Results: No statistically significant results were found between the three groups regarding the maximum value in defect, the maximum value in excess, and the minimum value as control, while a statistically significant difference was found between the overflow of orthodontic resin when compared to the flowable composite. Conclusions: The three materials that were used in this study were appropriate for attachment fabrication. The fidelity of attachment reproduction was similar when using the three different composites. The orthodontic composite showed more overflow when compared with the flowable one.

scholarly journals Estimation of Total Fluoride Concentration, Total Soluble Fluoride Concentration and pH among Various Brands of Toothpastes

2021 ◽  
Author(s):  
Praneetha D Rani ◽  
Vijaya Hegde
Keyword(s):  
Group Analysis ◽  
Fluoride Concentration ◽  
In Vitro Study ◽  
Significant Difference ◽  
The Mean ◽  
The Difference ◽  
Institute Of Technology ◽  
Level Of Significance ◽  
Post Hoc

Introduction: Fluoride toothpastes are a major reason for the decline in dental caries globally. For fluoride toothpaste to be effective, an adequate amount of Total Soluble Fluoride (TSF) must be available in the toothpastes. Aim: To determine and compare the Total Fluoride (TF), TSF and pH among various toothpaste brands. Materials and Methods: An in-vitro study was conducted during October 2019 on 20 toothpaste samples, which belonged to four groups namely, herbal toothpastes group, nonherbal toothpastes group, medicated toothpastes group and kids toothpastes group. Analysis of the samples was done at the Department of Environmental Engineering Laboratory, National Institute of Technology, Surathkal, Karnataka, India. The TF and the TSF concentration was determined using fluoride ion electrode. The pH was determined using pH meter. Statistical analysis was performed using Statistical Package for Social Sciences (SPSS version 19.0). Analysis of variance (ANOVA) was used by Tukey’s post-hoc test to determine the difference between groups. The level of significance was kept at 0.05. Results: The results showed that there was a significant difference between the toothpaste types for mean TF concentration (p=0.004). The post-hoc test showed that there was a significant difference between herbal and nonherbal toothpastes (p=0.041) where the mean TF concentration for nonherbal toothpastes was 1095.20 ppm when compared to herbal toothpastes was 704.40 ppm. The results showed that there was a siginificant difference between the toothpaste types for Mean TSF concentration (p<0.003). There was a significant difference between medicated and kids toothpastes (p=0.024) where the mean total soluble fluoride concentration for medicated toothpastes was 938.60 ppm when compared to the kids toothpastes was 521.20 ppm. Conclusion: The present study showed that pH of all the toothpastes were either neutral or alkaline and the TSF concentration was less when compared to TF concentrations.

scholarly journals The Antibacterial Efficacy of Biopure MTAD in Root Canal Contaminated with Enterococcus faecalis

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Blerim Kamberi ◽  
Donika Bajrami ◽  
Miranda Stavileci ◽  
Shuhreta Omeragiq ◽  
Fatmir Dragidella ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Sodium Hypochlorite Solution ◽  
Antibacterial Efficacy ◽  
Human Teeth ◽  
Exact Test ◽  
Hypochlorite Solution ◽  
Root Canals ◽  
Significant Difference ◽  
Level Of Significance

Aim. The purpose of this in vitro study was to assess the antimicrobial efficacy of Biopure MTAD against E. faecalis in contaminated root canals. Materials and Methods. Forty-two single rooted extracted human teeth were inoculated with E. faecalis and incubated for four weeks. The samples were divided in two control and five experimental groups irrigated with 1.5% sodium hypochlorite solution (NaOCl); 3% NaOCl; BioPure MTAD; 1.5% NaOCl/17% EDTA; or 3% NaOCl/17% EDTA. After a one-week incubation, complete disinfection was confirmed by the absence of turbidity in the incubation media. Dentin shavings were taken from samples with no turbidity to verify whether E. faecalis was present in dentin tubules. Results were analyzed statistically using Fisher's exact test, with the level of significance set at . Results. Statistical analysis of the data obtained at Day 7 and after dentin shaving analysis showed that BioPure MTAD had significantly greater antibacterial activity than 1.5% NaOCl, 1.5% NaOCl/17% EDTA and 3% NaOCl/17% EDTA. No significant difference was detected between MTAD and 3% NaOCl. Conclusions. These findings suggest that BioPure MTAD possesses superior bactericidal activity compared with NaOCl and EDTA against E. faecalis.

scholarly journals Impact of Bleaching before or after Veneer Preparation on Color Masking Ability of Laminate Veneers: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Gollshang Ahmad Mhammed Dalloo ◽  
Bestoon Mohammed Faraj ◽  
Abdulsalam Rasheed Al-Zahawi
Keyword(s):  
Hydrogen Peroxide ◽  
Color Change ◽  
In Vitro Study ◽  
Tooth Discoloration ◽  
Significant Difference ◽  
Color System ◽  
The Difference ◽  
Laminate Veneers ◽  
Cielab Color

Purpose. This study evaluates the effect of bleaching before or after veneer preparation and the depth of preparation on color masking ability of laminate veneers. Methods. Sixty extracted premolars were artificially stained to vita shade A4, verified by digital spectrophotometer (Vita Easy Shade V), and then divided into three groups: NB = nonbleached , BBP = bleaching before preparation, and BAP = bleaching after preparation. Based on the preparation depths, each group was further divided into two subgroups: S 1 = 0.5   mm and S 2 = 1.0   mm . BBP and BAP were subjected to one session of in-office bleaching using 35% hydrogen peroxide. IPS e-max CAD veneers of 0.5 and 1.0 mm thickness (corresponding to the preparation depths) of the same shade and translucency (HT A1) were cemented immediately to the bleached surfaces. Immediately after cementation, the color change Δ E between the baseline (after staining) and the resulted shades was measured using the Vita Easy Shade V digital spectrophotometer and CIELab color system. Results. Bleached groups exhibited a significant Δ E value compared to the nonbleached group ( p < 0.05 ). BAP showed the highest Δ E value. No significant difference was found between BBP and BAP. S2 revealed a significant Δ E value than S1 ( p < 0.05 ). No significant difference was found between S1of BAP and S2 of NB, BBP, and BAP ( p > 0.05 ). Regarding the color coordinates, the difference between the tested groups was highly significant in lightness ( Δ L ∗ ) ( p < 0.001 ), while no significant differences were found in green/red value ( Δ a ∗ ) and yellow/blue value ( Δ b ∗ ) ( p > 0.05 ). Conclusions. In cases of severe tooth discoloration, one session of in-office bleaching before or after veneer preparation and the preparation depth do not influence the color masking ability of laminate veneers.

scholarly journals The difference of the salivary volume before and after drinking the rosella tea (Hibiscus sabdariffa)

2010 ◽  
Vol 22 (3) ◽  
Author(s):  
Mutiara Indah Permata Sari Islami ◽  
Edeh Roletta Haroen ◽  
Sri Tjahajawati
Keyword(s):  
In Vitro Study ◽  
T Test ◽  
Hibiscus Sabdariffa ◽  
Test Analysis ◽  
Community Benefits ◽  
Significant Difference ◽  
Before And After ◽  
Quasi Experimental ◽  
The Difference

Introduction: Roselle plants (Hibiscus sabdariffa) is one of the herbs that began to be used by the community. Benefits of this plant is quite a lot for health. The portion taken for consumption is the red flower petals. oselle tea is one of the sour beverages which can affect the salivary gland secretion. The purpose of this study is to analyzed the difference of salivary volume before and after drinking roselle tea. Methods: This study has been conducted to 40 students of Faculty of Dentistry, Padjadjaran University, ranging from 18-23 years of age with good general condition. This study is quasi-experimental in vitro study using the paired test analysis with α = 0,05 of the data collected from salivary volume. Results: The result of study indicates that the average of salivary volume before drinking roselle tea is 1,90 milliliter. After drinking roselle tea, the average of salivary volume is 4,54 milliliter. The result of paired test analysis shows that t-test is 16,172 and t-table is 2,022. The value of t-test > t-table. Result of statistic shown there is significant difference of salivary volume before and after drinking roselle tea. Conclusion: There is a difference of salivary volume before and after drinking roselle tea.

Effect of Metal Extension of Crown in the Screw Access Channel of a Posterior Implant Abutment on the Retention of Cement Retained Prosthesis

2015 ◽  
Vol 41 (5) ◽  
pp. 537-541 ◽  
Author(s):  
Rashmi Biyani ◽  
Mohsin Ali ◽  
Donald Belles ◽  
John M. Powers
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Acrylic Resin ◽  
Instron Testing Machine ◽  
Access Channel ◽  
Significant Difference ◽  
Implant Abutment ◽  
Tensile Forces ◽  
Level Of Significance

Purpose: Reducing the height of the implant abutment due to limited interarch space decreases the surface area for retention of cemented restorations. The purpose of this in vitro study was to see whether engaging the screw access channel with metal extension compensates for the loss of retention of posterior crowns cemented on shorter abutments. Material and Methods: Four identical prefabricated abutments were mounted on implant replicas embedded in acrylic resin blocks. Three of these abutments were reduced in height by 1 mm, 2 mm, and 3 mm respectively and one was left unmodified. Two sets of base metal crowns were fabricated for each abutment, one without and one with the metal extension inside the screw access channel. The crowns were cemented using Tempbond NE. The tensile forces required to separate the cemented crowns from abutments were measured using an Instron testing machine. Statistical analysis of the data was performed using a 2-way analysis of variance and Fisher's protected least significant difference at 0.05 level of significance. Results: An increase of 24% to 261% in retentive forces was observed for the group having metal extension in the screw access channel. Statistically significant differences (P &lt; .001) were found among 2 types of crowns and four heights of abutments. Generally, the retentive forces were reduced in magnitude as the abutment height was reduced. Conclusion: The retention of a casting cemented to posterior implant abutments is influenced by the height of the abutment and the metal extension engaging the screw access channel. The crowns made with a metal extension showed superior retention values.

The Effect of Bleaching Agents on the Color Stability of Ceromer and Porcelain Restorative Materials In Vitro

2012 ◽  
Vol 38 (1) ◽  
pp. E1-E8 ◽  
Author(s):  
HB Kara ◽  
F Aykent ◽  
B Ozturk
Keyword(s):  
Color Change ◽  
Glass Ceramics ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Changes ◽  
Bleaching Procedure ◽  
Significant Difference ◽  
Restorative Materials ◽  
The Difference

SUMMARY Purpose The aim of this in vitro study was to determine the color changes of five different restorative materials after exposing these materials to two different home bleaching agents. Methods This study applied bleaching agents to an ultralow-fusing porcelain, a low-fusing porcelain, two types of heat-pressed glass ceramics, and a ceromer. A total of 24 disc-shaped specimens were fabricated (with a diameter of 10 mm and a thickness of 2 mm) from each material (n=12). The initial color measurements were taken with a spectrophotometer. The first set of specimens were bleached with 10% hydrogen peroxide (HP) for one hour daily for 10 days. The other set of specimens were bleached with 10% carbamide peroxide (CP) bleaching gel for eight hours daily for 14 days. Data were analyzed with the one-way analysis of variance and Kruskal-Wallis statistical test. The difference in the prebleaching and postbleaching color of each material was considered to be statistically significant at p &lt; 0.05. Results The study found a statistically significant difference among the color changes of the test groups after exposing them to both bleaching agents (p&lt;0.05). Appreciable color change was observed in the Estenia (ΔE=3.99) specimens that were bleached with the HP, and noticeable color changes were observed in the Estenia (ΔE=1.89) and IPS Empress 2 (ΔE=1.66) groups when they were treated with the CP. Conclusions Restorations (especially polymer-containing restorative materials) should be protected before any bleaching procedure due to the high risk of color change.

scholarly journals Is There a Significant Difference in Accuracy of Four Intraoral Scanners for Short-Span Fixed Dental Prosthesis? A Comparative In Vitro Study

2021 ◽  
Vol 11 (18) ◽  
pp. 8280
Author(s):  
Anca Jivănescu ◽  
Adrian Bara ◽  
Andrei-Bogdan Faur ◽  
Raul Nicolae Rotar
Keyword(s):  
Data Analysis ◽  
In Vitro Study ◽  
Digital Impression ◽  
Precision Data ◽  
Fixed Partial Denture ◽  
Fixed Dental Prosthesis ◽  
Significant Difference ◽  
Short Span ◽  
Level Of Significance

Is the accuracy of the older generation of IOSs an impediment for obtaining a quality intraoral digital impression? The aim of this study was to evaluate the differences in accuracy between four intraoral scanners (two of the latest IOSs and two older IOSs) in the scenario of a short span fixed partial denture, and to determine if these differences have a major impact on the quality of the final digital impression. Four intraoral scanners: Cerec PrimeScan, Medit i700, Cerec Omnicam and Planmeca PlanScan and one laboratory scanner were used in this study. The scanned data were processed with the help of Geomagic Control X, a metrology software. For the statistical data analysis, the level of significance was set as 0.05 (α = 0.05). The Medit i700 group displayed the best level of trueness with the median value of 23.25 µm, PrimeScan group with a median of 25.55 µm, Omnicam group with a median of 32.3 µm and the PlanScan group which displayed the lowest level of trueness with a median value of 75.8 µm. From the precision data analysis, it was concluded that the PrimeScan group showed the best results, followed by Medit i700, Omnicam and the PlanScan group which showed the lowest precision. Even if there are some significant differences in accuracy between old and new IOSs, in the in vitro scenario of short span dental prostheses, the accuracy values were within the clinically acceptable range and may present important clinical implications.

scholarly journals A Pilot Study on the Degree of Tooth Staining Caused by Pollen Water and Chlorhexidine: In Vitro Study

2021 ◽  
Vol 15 (1) ◽  
pp. 674-679
Author(s):  
Khalid S. Almulhim ◽  
Muhanad S. Alhareky ◽  
Ahmed Mohammed AlDakhil ◽  
Odai Alsultan ◽  
Kasumi K. Barouch
Keyword(s):  
Color Change ◽  
In Vitro Study ◽  
Three Solutions ◽  
Human Teeth ◽  
Oral Rinse ◽  
Significant Difference ◽  
Normal Water ◽  
The Difference ◽  
Sudden Decrease

Background: Chlorhexidine oral rinse has been used as an adjuvant in the treatment of periodontal disease. However, there are drawbacks of using chlorhexidine i.e. tooth staining and other side effects, including allergy reaction. In light of the proven therapeutic properties of pollen water as well as its relatively cheap cost in the market, pollen water has a potential to be an effective alternative to chlorhexidine oral rinse. The aim of this study is to compare the degree of tooth staining influenced by water-based pollen mouthwash to the standard Chlorhexidine mouthwash using spectrophotometer. Materials and Methods: 24 specimens from extracted intact human teeth were soaked into the three different solutions, Chlorhexidine, Pollen water (date palm pollen water suspension), and normal water. Color measurements were carried out by a spectrophotometer devise and recorded at 5 different time intervals. Color change (∆E), Chroma (C*) and Hue (H*) were analyzed and compared among the three solutions. Results: Overall mean ∆E was similar in all groups, significant difference between all time points was found only in pollen water. The change in C* was higher in pollen water as compared to other solutions. There was a subtle increase in H* in the Chlorhexidine samples after week 3. The H* values in pollen water were stable, but a sudden decrease was observed in week 6. The difference in H* among the three solutions was significant after 3 weeks. Conclusion: Within the limitation of our study, it can be concluded that Pollen water stained teeth to a lesser extent than did chlorhexidine. It might be beneficial to use Pollen water as mouthwash however, further investigation is needed regarding the efficacy of plaque control.

scholarly journals Effect of Polymerization Time on Residual Monomer Release in Dental Composite: In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Ezgi Sonkaya ◽  
Zeliha Gonca Bek Kürklü ◽  
Şeyhmus Bakır
Keyword(s):  
High Performance ◽  
Storage Period ◽  
In Vitro Study ◽  
Composite Resins ◽  
Dental Composite ◽  
Polymerization Time ◽  
Residual Monomer ◽  
Significant Difference ◽  
And Storage

Light activated resin-based composites are the most accepted and used materials among clinicians. The aim of this study is to determine the amount of residual monomer released from nanofiller composite resins for different polymerization times and storage periods in vitro. To this purpose, Tetric Ceram (Ivoclar, Liechtenstein), Clearfil Majesty Posterior (Kuraray, Japan), Grandio (VOCO, Germany), and Filtek Ultimate Universal (3M, USA) were used as nanofiller resin composites samples. Four groups ( n = 40 , diameter: 5 mm, thickness: 2 mm) of each material were fabricated, and each group was exposed to three different polymerization time (10, 20 and 40 sec). High-performance liquid chromatography (HPLC) was used to measure the amount of monomers released over 1, 15, and 30 days. The highest amount of monomer release was seen in Tetric EvoCream composite, while the least monomer release was seen in Clearfil Majesty composite. Regardless of the polymerization time, material, or storage period, the highest amount of eluted monomer was Bis-GMA. It is observed that there is no statistically significant difference between various polymerization times. Monomer release reached its highest level on the 15th day and decreased on the 30th day for all composites. Polymerization time did not affect the monomer release from the composites, but the type of the monomers and concentration of the filler used in the composites affected the amount of released monomers. The use of TEGDMA (co)monomer reduced the monomer release.

Comparative Assessment of Antibacterial Efficacy of Commercially Available Different Dental Gels: An In-vitro Study

2020 ◽  
Vol 15 ◽  
Author(s):  
Minal M. Kshirsagar ◽  
Arun S. Dodamani ◽  
Prashanth Vishwakarma ◽  
Gaurao Mali ◽  
Vrushali Ramdas Khobragadec ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Diffusion Method ◽  
Antibacterial Efficacy ◽  
Zone Of Inhibition ◽  
Prolonged Duration ◽  
The Difference ◽  
Level Of Significance ◽  
Post Hoc ◽  
Medium Diameter

Background: The topical routes of administering drug have certain visible advantages as direct application of a drug to the site of action and persistence of action for prolonged duration. More stability and better application property of gel cause its use for topical application. Objectives: To determine and compare antibacterial efficacy of commercially available different dental gels. Methods: For the evaluation of antibacterial efficacy of commercially available different antiseptic gels on Streptococcus mutans and Lactobacillus acidophilus well-diffusion method was used. To assess the antibacterial efficacy after incubation in appropriate culture medium diameter of zone of inhibition was measured. Results: Maximum zone of inhibition was found with Curenext gel (40 mm,40mm) followed by Hexigel (30 mm, 21mm) Mucopain (17 mm, 17mm) and Dologel (7 mm, 16mm) against S. mutans and L. acidophilus respectively. Analysis of variance (ANOVA) and Post Hoc Test were used to analyze results statistically. The difference between commercially available different dental gels was statistically significant (P < 0.001) at 5% of level of significance. Conclusion: In the present study, it was seen that Curenext gel was more effective followed by Hexigel, Mucopain gel and Dologel on S. Mutans and L. Acidophilus.

Sign in / Sign up

Export Citation Format

Share Document