scholarly journals Machinability and Energy Efficiency in Micro-EDM Milling of Zirconium Boride Reinforced with Silicon Carbide Fibers

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3920 ◽  
Author(s):  
Mariangela Quarto ◽  
Giuliano Bissacco ◽  
Gianluca D’Urso
Keyword(s):  
Energy Efficiency ◽  
Process Parameters ◽  
Advanced Materials ◽  
Cavity Surface ◽  
Main Process ◽  
Zirconium Boride ◽  
Electrode Wear ◽  
Micro Edm ◽  
Process Performance ◽  
Sic Fibers

Several types of advanced materials have been developed to be applied in many industrial application fields to satisfy the high performance required. Despite this, research and development of process suited to machine are still limited. Due to the high mechanical properties, advanced materials are often considered as difficult to cut. For this reason, EDM (Electrical Discharge Machining) can be defined as a good option for the machining of micro components made of difficult to cut electrically conductive materials. This paper presents an investigation on the applicability of the EDM process to machine ZrB2 reinforced by SiC fibers, with assessment of process performance and energy efficiency. Different fractions of the additive SiC fibers were taken into account to evaluate the stability and repeatability of the process. Circular pocket features were machined by using a micro-EDM machine and the results from different process parameters combinations were analyzed with respect to material removal, electrode wear and cavity surface quality. Discharges data were collected and characterized to define the actual values of process parameters (peak current, pulse duration and energy per discharge). The characteristics of the pulses were used to evaluate the machinability and to investigate the energy efficiency of the process. The main process performance indicators were calculated as a function of the number of occurred discharges and the energy of a single discharge. The results show interesting aspects related to the process from both the performances and the removal mechanism point of view.

Investigating the Effect of Machining Parameters on Microdrilling of Titanium Grade 19 Alloy

2013 ◽  
Author(s):  
Shivraj Yeole ◽  
Nagabhushana Ramesh Nunna ◽  
Balu Naik Banoth
Keyword(s):  
Process Parameters ◽  
Material Removal ◽  
Removal Rate ◽  
Electrode Wear ◽  
Machining Parameters ◽  
Micro Edm ◽  
Electrode Diameter ◽  
Micro Holes ◽  
Titanium Grade ◽  
Edm Process

Electrical Discharge Micro Drilling (EDMD) is considered as one of the most effective method for machining difficult to cut and hard materials like titanium alloy. However, selection of process parameters for achieving superior surface finish, higher machining rate and accuracy is a challenging task in drilling micro-holes. In this paper, an attempt is made to optimize micro-EDM process parameters for drilling micro holes on titanium grade 19 alloy. In order to verify the optimal micro-EDM process parameters settings, material removal rate (MRR), electrode wear rate (EWR) and over cut (OC) were chosen as the responses to be observed. Pulse on time, pulse off time, electrode diameter and current were selected as the governing process parameters for evaluation by Taguchi method. Nine micro holes of 300 μm, 400 μm and 500 μm were drilled using L9 orthogonal array (OA) design. Optimal combination of machining parameters were obtained through Signal-to-Noise (S/N) ratio analysis. It is seen that machining performances like material removal rate and overcut are affected by the peak current whereas electrode wear is affected by peak current and electrode diameter. Morphology of the micro holes has been studied through SEM micrographs of machined micro-hole.

Process Optimization of One-Stage Propane Pre-Cooled MRC Cycle for Small-Scale LNG Plant

2012 ◽  
Vol 516-517 ◽  
pp. 1184-1187
Author(s):  
Heng Sun ◽  
Dan Shu ◽  
Hong Mei Zhu
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Process Parameters ◽  
Large Scale ◽  
High Energy ◽  
Small Scale ◽  
Main Process ◽  
One Stage ◽  
High Energy Efficiency ◽  
The One

One-stage pre-cooled mixture refrigerant cycle can be applied in small-scale LNG plant and be special suitable for skit mounted LNG plant. It has different character with the C3MR cycle used in large-scale LNG plant. The optimization of the mixture refrigerant is carried out using HYSYS software. The effect of the main process parameters on the performance of the cycle is calculated and discussed. The result shows that appropriate ranges of the process parameters exist. Higher and lower values of the parameters will increase the energy consumption significantly. The results also indicate that the optimization of the one-stage pre-cooled mixture refrigerant cycle can obtain rather high energy efficiency that is competitive with that of the SMR which is widely employed in small-scale LNG plant.

A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Lara Rebaioli ◽  
Irene Fassi
Keyword(s):  
Layer Thickness ◽  
Exposure Time ◽  
Process Parameters ◽  
Dimensional Accuracy ◽  
Main Process ◽  
Process Performance ◽  
Digital Light Processing ◽  
Specific Process ◽  
Experimental Campaign ◽  
Increasing Demand

Abstract Suitable benchmark artifacts are needed for assessing the technological capabilities and limitations of a specific process or for comparing the performances of different processes. Only a few benchmark artifacts have been specifically designed for features with microscale dimensions, even if their manufacturing is becoming very common due to the increasing demand for miniaturized parts or objects with microscale features. In this study, a suitable benchmark part is designed to evaluate the geometrical performance of a digital light processing (DLP) stereolithography (SLA) system for manufacturing microfeatures. The effect of the main process parameters (i.e., layer thickness and exposure time) and the feature position within the building platform on the process performance was assessed by a specifically studied experimental campaign. The results show that both the analyzed process parameters influence the minimum feasible size of protruding features and that the feature position influences the dimensional accuracy.

scholarly journals Optimizing Main Process Parameters When Conducting Powder-Mixed Electrical Discharge Machining of Hardened 90CrSi

Machines ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 375
Author(s):  
Anh-Tuan Nguyen ◽  
Xuan-Hung Le ◽  
Van-Tung Nguyen ◽  
Dang-Phong Phan ◽  
Quoc-Hoang Tran ◽  
...  
Keyword(s):  
Process Parameters ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Optimization Process ◽  
Main Process ◽  
Electrode Wear ◽  
Powder Concentration ◽  
Pulse On Time ◽  
Pulse Off Time

In the current study, an optimization process of powder-mixed electrical discharge machining (PMEDM) process when machining cylindrically shaped parts made of hardened 90CrSi steel is reported. In this study, SiC powder was mixed into the Diel MS 7000 dielectric solution. Additionally, graphite was chosen as the electrode material. The multi-objective functions were minimizing the surface roughness (SR) and electrode wear rate (EWR) and maximizing the material removal rate (MRR). The used input parameters of the optimization process included the powder concentration, the pulse-on time, the pulse-off time, the pulse current, and the servo voltage. A combination between the Taguchi method and the grey relation analysis (GRA) method with the support of Minitab R19 software was used to design the experiment and analyze the results. It was found that the optimal set of process parameters that can satisfy the above responses are Cp of 0.5 g/L, Ton of 8 µs, Toff of 8 µs, IP of 5 A, and SV of 4 V.

Recent Patents on Micro-EDM Milling

2020 ◽  
Vol 13 (3) ◽  
pp. 219-229
Author(s):  
Baocheng Xie ◽  
Jianguo Liu ◽  
Yongqiu Chen
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Three Dimensional ◽  
Processing Method ◽  
Electrode Wear ◽  
Micro Edm ◽  
Processing Efficiency ◽  
Processing Methods ◽  
Machining Quality ◽  
Micro Electrical Discharge Machining

Background: Micro-Electrical Discharge Machining (EDM) milling is widely used in the processing of complex cavities and micro-three-dimensional structures, which is a more effective processing method for micro-precision parts. Thus, more attention has been paid on the micro-EDM milling. Objective : To meet the increasing requirement of machining quality and machining efficiency of micro- EDM milling, the processing devices and processing methods of micro-EDM milling are being improved continuously. Methods: This paper reviews various current representative patents related to the processing devices and processing methods of micro-EDM milling. Results: Through summarizing a large number of patents about processing devices and processing methods of micro-EDM milling, the main problems of current development, such as the strategy of electrode wear compensation and the development trends of processing devices and processing methods of micro-EDM milling are discussed. Conclusion: The optimization of processing devices and processing methods of micro-EDM milling are conducive to solving the problems of processing efficiency and quality. More relevant patents will be invented in the future.

scholarly journals Shoulder Related Temperature Thresholds in FSSW of Aluminium Alloys

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4375
Author(s):  
David G. Andrade ◽  
Sree Sabari ◽  
Carlos Leitão ◽  
Dulce M. Rodrigues
Keyword(s):  
Heat Generation ◽  
Process Parameters ◽  
Rotational Speed ◽  
Aluminium Alloys ◽  
Spot Welding ◽  
Base Material ◽  
Main Process ◽  
Welding Temperature ◽  
Friction Stir ◽  
Tool Diameter

Friction Stir Spot Welding (FSSW) is assumed as an environment-friendly technique, suitable for the spot welding of several materials. Nevertheless, it is consensual that the temperature control during the process is not feasible, since the exact heat generation mechanisms are still unknown. In current work, the heat generation in FSSW of aluminium alloys, was assessed by producing bead-on-plate spot welds using pinless tools. Coated and uncoated tools, with varied diameters and rotational speeds, were tested. Heat treatable (AA2017, AA6082 and AA7075) and non-heat treatable (AA5083) aluminium alloys were welded to assess any possible influence of the base material properties on heat generation. A parametric analysis enabled to establish a relationship between the process parameters and the heat generation. It was found that for rotational speeds higher than 600 rpm, the main process parameter governing the heat generation is the tool diameter. For each tool diameter, a threshold in the welding temperature was identified, which is independent of the rotational speed and of the aluminium alloy being welded. It is demonstrated that, for aluminium alloys, the temperature in FSSW may be controlled using a suitable combination of rotational speed and tool dimensions. The temperature evolution with process parameters was modelled and the model predictions were found to fit satisfactorily the experimental results.

scholarly journals Optimization of injection molding process for car fender in consideration of energy efficiency and product quality

2014 ◽  
Vol 1 (4) ◽  
pp. 256-265 ◽  
Author(s):  
Hong Seok Park ◽  
Trung Thanh Nguyen
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Injection Molding ◽  
Product Quality ◽  
Process Parameters ◽  
Optimization Problems ◽  
Computational Cost ◽  
Injection Molding Process ◽  
Molding Process ◽  
Nsga Ii

Abstract Energy efficiency is an essential consideration in sustainable manufacturing. This study presents the car fender-based injection molding process optimization that aims to resolve the trade-off between energy consumption and product quality at the same time in which process parameters are optimized variables. The process is specially optimized by applying response surface methodology and using nondominated sorting genetic algorithm II (NSGA II) in order to resolve multi-object optimization problems. To reduce computational cost and time in the problem-solving procedure, the combination of CAE-integration tools is employed. Based on the Pareto diagram, an appropriate solution is derived out to obtain optimal parameters. The optimization results show that the proposed approach can help effectively engineers in identifying optimal process parameters and achieving competitive advantages of energy consumption and product quality. In addition, the engineering analysis that can be employed to conduct holistic optimization of the injection molding process in order to increase energy efficiency and product quality was also mentioned in this paper.

Formability of Explosive Welded Mg/Al Bimetallic Bar

2016 ◽  
Vol 716 ◽  
pp. 114-120 ◽  
Author(s):  
Sebastian Mróz ◽  
Piotr Szota ◽  
Teresa Bajor ◽  
Andrzej Stefanik
Keyword(s):  
Plastic Deformation ◽  
Strain Rate ◽  
Process Parameters ◽  
Metal Forming ◽  
Explosive Welding ◽  
Physical Modelling ◽  
Main Process ◽  
Compression Tests ◽  
Welding Method

The paper presents the results of physical modelling of the plastic deformation of the Mg/Al bimetallic specimens using the Gleeble 3800 simulator. The plastic deformation of Mg/Al bimetal specimens characterized by the diameter to thickness ratio equal to 1 was tested in compression tests. The aim of this work was determination of the range of parameters as temperature and strain rate that mainly influence on the plastic deformation of Mg/Al bars during metal forming processes. The tests were carried out for temperature range from 300 to 400°C for different strain rate values. The stock was round 22.5 mm-diameter with an Al layer share of 28% Mg/Al bars that had been produced using the explosive welding method. Based on the analysis of the obtained testing results it has been found that one of the main process parameters influencing the plastic deformation the bimetal components is the initial stock temperature and strain rate values.

Quality Monitoring and Prospects of Wire Bonding

2012 ◽  
Vol 588-589 ◽  
pp. 1156-1160
Author(s):  
Ge Ge Mei ◽  
Bin Jin ◽  
Wei Gong
Keyword(s):  
Process Parameters ◽  
Wire Bonding ◽  
Quality Monitoring ◽  
Main Trend ◽  
Microelectronic Packaging ◽  
Main Process ◽  
Bonding Quality ◽  
Semiconductor Packaging

Wire bonding is rapidly developmental technology of microelectronic packaging nearly half a century and become the main trend of semiconductor packaging field currently. This article introduces the main process parameters influencing on bonding quality, the methods to improve the bonding reliability, and prospects of developmental tendency of wire bonding.

Optimization and surface modification in electrical discharge machining of AA 6061/SiCp composite using Cu–W electrode

2015 ◽  
Vol 231 (3) ◽  
pp. 332-348 ◽  
Author(s):  
Balbir Singh ◽  
Jatinder Kumar ◽  
Sudhir Kumar
Keyword(s):  
Process Parameters ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Surface Characteristics ◽  
Electrode Wear ◽  
Material Transfer ◽  
Machined Surface ◽  
Recast Layer Thickness ◽  
Pulse On Time ◽  
Pulse Off Time

This paper presents the experimental investigation on the electro-discharge machining of aluminum alloy 6061 reinforced with SiC particles using sintered Cu–W electrode. Experiments have been designed as per central composite rotatable design, using response surface methodology. Machining characteristics such as material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR) have been investigated under the influence of four electrical process parameters; namely peak current, pulse on time, pulse off time, and gap voltage. The process parameters have been optimized to obtain optimal combination of MRR, EWR, and SR. Further, the influence of sintered Cu–W electrode on surface characteristics has been analyzed with scanning electron microscopy, energy dispersive spectroscopy, and Vicker microhardness tests. The results revealed that all the process parameters significantly affect MRR, EWR, and SR. The machined surface properties are modified as a result of material transfer from the electrode. The recast layer thickness is increased at higher setting of electrical parameters. The hardness across the machined surface is also increased by the use of sintered Cu–W electrode.

Sign in / Sign up

Export Citation Format

Share Document