scholarly journals Synthesis of Sub 3 nm-Sized Uniform Magnetite Nanoparticles Using Reverse Micelle Method for Biomedical Application

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3850 ◽  
Author(s):  
Euiyoung Jung ◽  
Sung-Won Kim ◽  
Ahyoung Cho ◽  
Yu-Jin Kim ◽  
Gun-Jae Jeong ◽  
...  
Keyword(s):  
Magnetite Nanoparticles ◽  
Fe3o4 Nanoparticles ◽  
Reverse Micelles ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Experimental Conditions ◽  
Air Atmosphere ◽  
Size Uniformity ◽  
Novel Method ◽  
Apoptotic Activity

We report a synthetic method for small and uniform Fe3O4 (magnetite) nanoparticles under mild conditions. Spherical sub-3 nm-sized magnetite nanoparticles were prepared via reverse micelles composed of oleylamine, F127, xylene, and water for the reaction of iron(III) stearate with hydrazine at a reaction temperature of 90 °C in air atmosphere. These synthesized magnetite nanoparticles exhibited good size uniformity. By controlling experimental conditions, we could easily control both size and size uniformity of these magnetite nanoparticles. We further investigated whether Fe3O4 could be used in biomedical applications. Cytotoxicity of Fe3O4 was evaluated with human adipose-derived stem cells (hADSCs). Our results showed that the number of hADSCs did not significantly decrease when these cells were treated with Fe3O4 nanoparticles at a concentration of up to 9 μg/mL. Apoptotic activity and cell proliferation of hADSCs treated with Fe3O4 nanoparticles were similar to those of hADSCs without any treatment. This novel method could be used for synthesizing uniform and biocompatible Fe3O4 nanoparticles with further biomedical applications.

scholarly journals Synthesis and Characterization of Super Paramagnetic Magnetite Nanoparticles for Drug Delivery Application

2018 ◽  
Vol 7 (2.19) ◽  
pp. 87
Author(s):  
D BALAJ ◽  
C SARALA RUBI ◽  
N G. RENGANATHAN
Keyword(s):  
Drug Delivery ◽  
Magnetite Nanoparticles ◽  
Fe3o4 Nanoparticles ◽  
Biomedical Application ◽  
Synthesis And Characterization ◽  
Xrd Pattern ◽  
Magnetite Fe3o4 ◽  
Tumor Hyperthermia ◽  
Potential Applications

Attractive nanoparticles have been broadly considered on account of their potential applications as complexity operators in attractive reverberation imaging (MRI) of tumors, cell and DNA partition, attractively guided medication conveyance, tumor hyperthermia. Among the attractive oxides, magnetite nanoparticles are most appropriate because of their low danger and great attractive properties which may be used in drug delivery. Magnetite nanoparticles were synthesized using FeCl3 and FeSO4 as precursors and characterized for size and shape using non-contact AFM.  The formation of magnetite was confirmed by XRD pattern. The elemental composition of the obtained phase was determined using EDAX. In this work, we are aiming to develop drug loaded biopolymer Magnetite nanoparticles for biomedical application. Our main objective is to synthesize and characterize Magnetite (Fe3O4) nanoparticles.  

Graphene and Graphene-Based Materials in Biomedical Applications

2019 ◽  
Vol 26 (38) ◽  
pp. 6834-6850 ◽  
Author(s):  
Mohammad Omaish Ansari ◽  
Kalamegam Gauthaman ◽  
Abdurahman Essa ◽  
Sidi A. Bencherif ◽  
Adnan Memic
Keyword(s):  
Tissue Engineering ◽  
Thermal Properties ◽  
Gene Delivery ◽  
Regenerative Medicine ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Two Dimensional ◽  
Drug And Gene Delivery ◽  
Biomedical Fields

: Nanobiotechnology has huge potential in the field of regenerative medicine. One of the main drivers has been the development of novel nanomaterials. One developing class of materials is graphene and its derivatives recognized for their novel properties present on the nanoscale. In particular, graphene and graphene-based nanomaterials have been shown to have excellent electrical, mechanical, optical and thermal properties. Due to these unique properties coupled with the ability to tune their biocompatibility, these nanomaterials have been propelled for various applications. Most recently, these two-dimensional nanomaterials have been widely recognized for their utility in biomedical research. In this review, a brief overview of the strategies to synthesize graphene and its derivatives are discussed. Next, the biocompatibility profile of these nanomaterials as a precursor to their biomedical application is reviewed. Finally, recent applications of graphene-based nanomaterials in various biomedical fields including tissue engineering, drug and gene delivery, biosensing and bioimaging as well as other biorelated studies are highlighted.

Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges

2020 ◽  
Vol 27 (28) ◽  
pp. 4622-4646 ◽  
Author(s):  
Huayu Liu ◽  
Kun Liu ◽  
Xiao Han ◽  
Hongxiang Xie ◽  
Chuanling Si ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Ion ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Cellulose Nanofibrils ◽  
Wound Dressings ◽  
Preparation Methods ◽  
Tissue Scaffold ◽  
Surface Areas ◽  
Mechanical Methods

Background: Cellulose Nanofibrils (CNFs) are natural nanomaterials with nanometer dimensions. Compared with ordinary cellulose, CNFs own good mechanical properties, large specific surface areas, high Young's modulus, strong hydrophilicity and other distinguishing characteristics, which make them widely used in many fields. This review aims to introduce the preparation of CNFs-based hydrogels and their recent biomedical application advances. Methods: By searching the recent literatures, we have summarized the preparation methods of CNFs, including mechanical methods and chemical mechanical methods, and also introduced the fabrication methods of CNFs-based hydrogels, including CNFs cross-linked with metal ion and with polymers. In addition, we have summarized the biomedical applications of CNFs-based hydrogels, including scaffold materials and wound dressings. Results: CNFs-based hydrogels are new types of materials that are non-toxic and display a certain mechanical strength. In the tissue scaffold application, they can provide a micro-environment for the damaged tissue to repair and regenerate it. In wound dressing applications, it can fit the wound surface and protect the wound from the external environment, thereby effectively promoting the healing of skin tissue. Conclusion: By summarizing the preparation and application of CNFs-based hydrogels, we have analyzed and forecasted their development trends. At present, the research of CNFs-based hydrogels is still in the laboratory stage. It needs further exploration to be applied in practice. The development of medical hydrogels with high mechanical properties and biocompatibility still poses significant challenges.

Biomedical Applications and Patents on Metallic Nanoparticles

2020 ◽  
Vol 10 ◽  
Author(s):  
Geetanjali Singh ◽  
Pramod Kumar Sharma ◽  
Rishabha Malviya
Keyword(s):  
Metallic Nanoparticles ◽  
Biomedical Applications ◽  
Size Range ◽  
Biomedical Application ◽  
Chemical Reduction ◽  
Chemical Methods ◽  
Future Challenges ◽  
Biological Methods ◽  
Cancer Diagnosis And Therapy ◽  
Physical And Chemical

Aim/Objective: The author writes the manuscript by reviewing the literatures related to the biomedical application of metallic nanoparticles. The term metal nanoparticles are used to describe the nanosized metals with the dimension within the size range of 1-100 nm. Methods: The preparation of metallic nanoparticles and their application is an influential area for research. Among various physical and chemical methods (viz. chemical reduction, thermal decomposition, etc.) for synthesizing silver nanoparticles, biological methods have been suggested as possible eco-friendly alternatives. The synthesis of metallic nanoparticles is having many problems inclusive of solvent toxicity, the formation of hazardous byproducts and consumption of energy. So it is important to design eco-friendly benign procedures for the synthesis of metallic nanoparticles. Results: From the literature survey, we concluded that metallic nanoparticles have applications in the treatment of different diseases. Metallic nanoparticles are having a great advantage in the detection of cancer, diagnosis, and therapy. And it can also have properties such as antifungal, antibacterial, anti-inflammatory, antiviral and anti-angiogenic. Conclusion: In this review, recent upcoming advancement of biomedical application of nanotechnology and their future challenges has been discussed.

scholarly journals Functionalization of Gold Nanostars with Cationic β-Cyclodextrin-Based Polymer for Drug Co-Loading and SERS Monitoring

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Orlando Donoso-González ◽  
Lucas Lodeiro ◽  
Álvaro E. Aliaga ◽  
Miguel A. Laguna-Bercero ◽  
Soledad Bollo ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Colloidal Stability ◽  
Biomedical Application ◽  
Drug Loading ◽  
Gold Nanostars ◽  
Raman Optical Activity ◽  
Cationic Group ◽  
Low Cytotoxicity ◽  
Stability Limits ◽  
Zeta Potential Analysis

Gold nanostars (AuNSs) exhibit modulated plasmon resonance and have a high SERS enhancement factor. However, their low colloidal stability limits their biomedical application as a nanomaterial. Cationic β-cyclodextrin-based polymer (CCD/P) has low cytotoxicity, can load and transport drugs more efficiently than the corresponding monomeric form, and has an appropriate cationic group to stabilize gold nanoparticles. In this work, we functionalized AuNSs with CCD/P to load phenylethylamine (PhEA) and piperine (PIP) and evaluated SERS-based applications of the products. PhEA and PIP were included in the polymer and used to functionalize AuNSs, forming a new AuNS-CCD/P-PhEA-PIP nanosystem. The system was characterized by UV–VIS, IR, and NMR spectroscopy, TGA, SPR, DLS, zeta potential analysis, FE-SEM, and TEM. Additionally, Raman optical activity, SERS analysis and complementary theoretical studies were used for characterization. Minor adjustments increased the colloidal stability of AuNSs. The loading capacity of the CCD/P with PhEA-PIP was 95 ± 7%. The physicochemical parameters of the AuNS-CCD/P-PhEA-PIP system, such as size and Z potential, are suitable for potential biomedical applications Raman and SERS studies were used to monitor PhEA and PIP loading and their preferential orientation upon interaction with the surface of AuNSs. This unique nanomaterial could be used for simultaneous drug loading and SERS-based detection.

scholarly journals Cryogenic Exfoliation of 2D Stanene Nanosheets for Cancer Theranostics

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Jiang Ouyang ◽  
Ling Zhang ◽  
Leijiao Li ◽  
Wei Chen ◽  
Zhongmin Tang ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Density Functional ◽  
Biomedical Application ◽  
Density Functional Theory Calculations ◽  
Free Electrons ◽  
Functional Theory ◽  
New Approach ◽  
New Type ◽  
Average Size ◽  
Cancer Theranostics

Abstract Stanene (Sn)-based materials have been extensively applied in industrial production and daily life, but their potential biomedical application remains largely unexplored, which is due to the absence of the appropriate and effective methods for fabricating Sn-based biomaterials. Herein, we explored a new approach combining cryogenic exfoliation and liquid-phase exfoliation to successfully manufacture two-dimensional (2D) Sn nanosheets (SnNSs). The obtained SnNSs exhibited a typical sheet-like structure with an average size of ~ 100 nm and a thickness of ~ 5.1 nm. After PEGylation, the resulting PEGylated SnNSs (SnNSs@PEG) exhibited good stability, superior biocompatibility, and excellent photothermal performance, which could serve as robust photothermal agents for multi-modal imaging (fluorescence/photoacoustic/photothermal imaging)-guided photothermal elimination of cancer. Furthermore, we also used first-principles density functional theory calculations to investigate the photothermal mechanism of SnNSs, revealing that the free electrons in upper and lower layers of SnNSs contribute to the conversion of the photo to thermal. This work not only introduces a new approach to fabricate 2D SnNSs but also establishes the SnNSs-based nanomedicines for photonic cancer theranostics. This new type of SnNSs with great potential in the field of nanomedicines may spur a wave of developing Sn-based biological materials to benefit biomedical applications.

scholarly journals Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2896
Author(s):  
Sara Ferraris ◽  
Silvia Spriano ◽  
Alessandro Calogero Scalia ◽  
Andrea Cochis ◽  
Lia Rimondini ◽  
...  
Keyword(s):  
Surface Modification ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Electrospun Fibers ◽  
Natural Polymers ◽  
Polymeric Fibers ◽  
Biological Phenomena ◽  
Proper Design ◽  
Synthetic And Natural Polymers ◽  
Selection Of

Electrospinning is gaining increasing interest in the biomedical field as an eco-friendly and economic technique for production of random and oriented polymeric fibers. The aim of this review was to give an overview of electrospinning potentialities in the production of fibers for biomedical applications with a focus on the possibility to combine biomechanical and topographical stimuli. In fact, selection of the polymer and the eventual surface modification of the fibers allow selection of the proper chemical/biological signal to be administered to the cells. Moreover, a proper design of fiber orientation, dimension, and topography can give the opportunity to drive cell growth also from a spatial standpoint. At this purpose, the review contains a first introduction on potentialities of electrospinning for the obtainment of random and oriented fibers both with synthetic and natural polymers. The biological phenomena which can be guided and promoted by fibers composition and topography are in depth investigated and discussed in the second section of the paper. Finally, the recent strategies developed in the scientific community for the realization of electrospun fibers and for their surface modification for biomedical application are presented and discussed in the last section.

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

Sign in / Sign up

Export Citation Format

Share Document