scholarly journals Effect of Nanosilica on Mechanical Properties and Microstructure of PVA Fiber-Reinforced Geopolymer Composite (PVA-FRGC)

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3624 ◽  
Author(s):  
Hasan Assaedi ◽  
Thamer Alomayri ◽  
Ayesha Siddika ◽  
Faiz Shaikh ◽  
Hatem Alamri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Microstructure Analysis ◽  
Flexural Behavior ◽  
Optimum Level ◽  
Fiber Reinforced ◽  
X Ray Diffraction ◽  
Geopolymer Matrix ◽  
The Matrix ◽  
Pva Fiber ◽  
Geopolymer Composites

This paper presents the effects of various nanosilica (NS) contents on the mechanical properties of polyvinyl alcohol (PVA) fiber-reinforced geopolymer composites (PVA-FRGC). Microstructure analysis with X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used to characterize the geopolymer composites. The results showed that the mechanical properties in terms of compressive strength, impact strength, and flexural behavior were improved due to the addition of NS to the PVA-FRGC. The optimum NS content was 1.0 to 2.0 wt%, which exhibited highest improvement in the above mechanical properties. Microstructure analysis showed that the addition of NS up to an optimum level densified the microstructure of the matrix as well as the PVA fiber–geopolymer matrix interface.

scholarly journals Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications

2008 ◽  
Vol 55-57 ◽  
pp. 477-480 ◽  
Author(s):  
T.D. Hung ◽  
D. Pernica ◽  
Dora Kroisová ◽  
Oleg Bortnovsky ◽  
Petr Louda ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Structure Characterization ◽  
Alkali Resistance ◽  
Matrix Composites ◽  
Japanese Industrial Standard ◽  
Geopolymer Matrix ◽  
The Matrix ◽  
Fiber Reinforcements ◽  
Geopolymer Composites

Geopolymer matrice Composites are fabricated at room temperature or thermoset in a simple autoclave. After approximately four hours of curing, composite materials exhibit excellent properties. Finding applications of geopolymeric composites in all fields of industry are the hot topics. This paper covers: (i) mechanical properties of fibers: carbon, Saint-Gobain Cemfil/CFV alkali resistance glass (various types), ARG-NEC (Nippon electric Columbia) alkali resistance glass, E-glass for pultrusion, AR glass for pultrusion were evaluated in accordance with Japanese Industrial Standard (JIS R 7601). (ii) properties of geopolymeric matrices: geopolymeric matrices are fabricated from various types of geopolymeric resins that were made at Research Institute of Inorganic Chemistry, Inc., Czech Republic and testing for mechanical properties, and by SEM for structure characterization. (iii) fabrication procedures of geopolymer matrix composites with carbon and other fiber reinforcements. (iv) results of mechanical testing of geopolymer composites, SEM for adhesion between the matrix and reinforcement, and (v) Results and discussion.

scholarly journals Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1124
Author(s):  
Zhifang Liang ◽  
Hongwu Wu ◽  
Ruipu Liu ◽  
Caiquan Wu
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Mechanical Performance ◽  
Tensile Elongation ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Impact Performance ◽  
The Matrix ◽  
Blending Process ◽  
Extension Direction

Green biodegradable plastics have come into focus as an alternative to restricted plastic products. In this paper, continuous long sisal fiber (SF)/polylactic acid (PLA) premixes were prepared by an extrusion-rolling blending process, and then unidirectional continuous long sisal fiber-reinforced PLA composites (LSFCs) were prepared by compression molding to explore the effect of long fiber on the mechanical properties of sisal fiber-reinforced composites. As a comparison, random short sisal fiber-reinforced PLA composites (SSFCs) were prepared by open milling and molding. The experimental results show that continuous long sisal fiber/PLA premixes could be successfully obtained from this pre-blending process. It was found that the presence of long sisal fibers could greatly improve the tensile strength of LSFC material along the fiber extension direction and slightly increase its tensile elongation. Continuous long fibers in LSFCs could greatly participate in supporting the load applied to the composite material. However, when comparing the mechanical properties of the two composite materials, the poor compatibility between the fiber and the matrix made fiber’s reinforcement effect not well reflected in SSFCs. Similarly, the flexural performance and impact performance of LSFCs had been improved considerably versus SSFCs.

scholarly journals Hemp Fiber Reinforced Red Mud/Fly Ash Geopolymer Composite Materials: Effect of Fiber Content on Mechanical Strength

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 511 ◽  
Author(s):  
Eyerusalem A. Taye ◽  
Judith A. Roether ◽  
Dirk W. Schubert ◽  
Daniel T. Redda ◽  
Aldo R. Boccaccini
Keyword(s):  
Fly Ash ◽  
Mechanical Strength ◽  
Red Mud ◽  
Fiber Reinforced ◽  
Brazilian Tensile Strength ◽  
Hemp Fiber ◽  
Hemp Fibers ◽  
The Matrix ◽  
Geopolymer Composites ◽  
Scanning Electron

Novel hemp fiber reinforced geopolymer composites were fabricated. The matrix was a new geopolymer based on a mixture of red mud and fly ash. Chopped, randomly oriented hemp fibers were used as reinforcement. The mechanical properties of the geopolymer composite, such as diametral tensile (DTS) (or Brazilian tensile) strength and compressive strength (CS), were measured. The geopolymer composites reinforced with 9 vol.% and 3 vol.% hemp fiber yielded average DTS values of 5.5 MPa and average CS values of 40 MPa. Scanning electron microscopy (SEM) studies were carried out to evaluate the microstructure and fracture surfaces of the composites. The results indicated that the addition of hemp fiber is a promising approach to improve the mechanical strength as well as to modify the failure mechanism of the geopolymer, which changed from brittle to “pseudo-ductile”.

scholarly journals Effect of different PVA and steel fiber length and content on mechanical properties of CaCO3 whisker reinforced cementitious composites

2019 ◽  
Vol 69 (336) ◽  
pp. 200 ◽  
Author(s):  
M. Cao ◽  
C. Xie ◽  
L. Li ◽  
M. Khan
Keyword(s):  
Mechanical Properties ◽  
Crack Resistance ◽  
Fiber Length ◽  
Large Deflection ◽  
Steel Fiber ◽  
Flexural Behavior ◽  
Cementitious Composites ◽  
Hybrid Fiber ◽  
Pva Fiber ◽  
Fiber Reinforced Cementitious Composites

In this paper, calcium carbonate (CaCO3) whisker as a fiber reinforcement is mixed with steel and PVA fiber to form a multiscale hybrid fiber reinforced cementitious composites (MHFRCC). ASTM standard and post-crack strength techniques are performed to evaluate the mechanical properties of MHFRCC. The 1.25 % long steel fiber, 0.55 % short PVA fiber and 2.0 % CaCO3 whisker specimens showed the best flexural behavior before L/600 deflection. However, 1.5 % long steel fiber, 0.4 % long PVA fiber and 1.0 % CaCO3 whisker specimens presented better crack resistance after L/600 deflection. It is revealed that flexural parameters increase as comprehensive reinforcing index increase. The result showed that the CaCO3 whisker and short PVA fiber provided crack resistance effect at micro-scale and mainly play a dominate role in inhibiting micro-cracking. However, long steel fiber and long PVA fiber showed a better bridging effect of macro cracks at a large deflection.

Mix design and flexural toughness of PVA fiber reinforced fly ash-geopolymer composites

2017 ◽  
Vol 150 ◽  
pp. 179-189 ◽  
Author(s):  
Fang Xu ◽  
Xin Deng ◽  
Chao Peng ◽  
Jing Zhu ◽  
Jianping Chen
Keyword(s):  
Fly Ash ◽  
Mix Design ◽  
Fiber Reinforced ◽  
Flexural Toughness ◽  
Pva Fiber ◽  
Geopolymer Composites

scholarly journals Efficient Hydrophobic Modification of Old Newspaper and Its Application in Paper Fiber Reinforced Composites

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 842 ◽  
Author(s):  
Weiwei Zhang ◽  
Jin Gu ◽  
Dengyun Tu ◽  
Litao Guan ◽  
Chuanshuang Hu
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Natural Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Oh Groups ◽  
Uniform Dispersion ◽  
The Matrix ◽  
Paper Fibers

Paper fibers have gained broad attention in natural fiber reinforced composites in recent years. The specific problem in preparing paper fiber reinforced composites is that paper fibers easily become flocculent after pulverization, which increases difficulties during melt-compounding with polymer matrix and results in non-uniform dispersion of paper fibers in the matrix. In this study, old newspaper (ONP) was treated with a low dosage of gaseous methyltrichlorosilane (MTCS) to solve the flocculation. The modified ONP fibers were characterized by Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Thermogravimetric Analysis (TG). Then the modified ONP fibers and high-density polyethylene (HDPE) were extruded and pelletized to prepare ONP/HDPE composites via injection molding. Maleic anhydride-grafted polyethylene (MAPE) was added to enhance the interfacial bonding performance with the ultimate purpose of improving the mechanical strength of the composites. The mechanical properties such as tensile, flexural, and impact strength and the water absorption properties of the composite were tested. The results showed that the formation of hydrogen bonding between ONP fibers was effectively prevented after MTCS treatment due to the reduction of exposed –OH groups at the fiber surface. Excessive dosage of MTCS led to severe fiber degradation and dramatically reduced the aspect ratio of ONP fibers. Composites prepared with ONP fibers modified with 4% (v/w) MTCS showed the best mechanical properties due to reduced polarity between the fibers and the matrix, and the relatively long aspect ratio of treated ONP fibers. The composite with or without MAPE showed satisfactory water resistance properties. MTCS was proven to be a cheap and efficient way to pretreat old newspaper for preparing paper fiber reinforced composites.

Microstructure characterization and evaluation of mechanical properties of stir rheocast AA2024/TiB2 composite

2019 ◽  
Vol 54 (7) ◽  
pp. 981-997
Author(s):  
Semegn Cheneke ◽  
D Benny Karunakar
Keyword(s):  
Mechanical Properties ◽  
Dendritic Structure ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Globular Structure ◽  
Cast Sample ◽  
X Ray ◽  
Weight Percentage ◽  
The Matrix ◽  
Fractured Surface

In this research, microstructure and mechanical properties of stir rheocast AA2024/TiB2 metal matrix composite have been investigated. The working temperature was 640℃, which was the selected semisolid temperature that corresponds to 40% of the solid fraction. Two weight percentage, 4 wt%, and 6 wt% of the TiB2 reinforcements were added to the matrix. The field emission scanning electron microscope micrographs of the developed composites showed a uniform distribution of the particles in the case of the 2 wt% and 4 wt% of the reinforcements. However, the particles agglomerated as the weight percentages of the reinforcement increases to 6%. The optical microscope of the liquid cast sample showed the dendritic structure, whereas the rheocast samples showed a globular structure. The X-ray diffraction analysis confirmed the distribution of the reinforcements in the matrix and the formation of some intermetallic compounds. Mechanical properties significantly improved by the addition of the reinforcements in the matrix. An increase in tensile strength of 13.3%, 40%, 28%, and 5% was achieved for the unreinforced rheocast sample, 2 wt%, 4 wt%, and 6 wt% reinforced rheocast samples respectively, compared to the liquid cast sample. An increase in 20% of hardness was attained for the composite with 2 wt% TiB2 compared to the liquid cast sample. According to the fractography analysis, small dimples were observed on the fractured surface of the unreinforced rheocast sample, whereas small and large voids were dominant on the fractured surface of the 2 wt% composite, which shows the ductile fracture mode.

Mechanical Properties of Wood Fiber Reinforced Geopolymer Composites with Sand Addition

2019 ◽  
Vol 18 (2) ◽  
pp. 285-296 ◽  
Author(s):  
Gabriel Furtos ◽  
Laura Silaghi-Dumitrescu ◽  
Petru Pascuta ◽  
Codruta Sarosi ◽  
Kinga Korniejenko
Keyword(s):  
Mechanical Properties ◽  
Wood Fiber ◽  
Fiber Reinforced ◽  
Geopolymer Composites

scholarly journals The Application of Fiber-Reinforced Materials in Disc Repair

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Bao-Qing Pei ◽  
Hui Li ◽  
Gang Zhu ◽  
De-Yu Li ◽  
Yu-Bo Fan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dynamic Properties ◽  
Spinal Diseases ◽  
Fiber Reinforced ◽  
Research Directions ◽  
Fiber Reinforced Materials ◽  
The Matrix ◽  
Disc Repair ◽  
Regenerative Therapies ◽  
Reinforced Materials

The intervertebral disc degeneration and injury are the most common spinal diseases with tremendous financial and social implications. Regenerative therapies for disc repair are promising treatments. Fiber-reinforced materials (FRMs) are a kind of composites by embedding the fibers into the matrix materials. FRMs can maintain the original properties of the matrix and enhance the mechanical properties. By now, there are still some problems for disc repair such as the unsatisfied static strength and dynamic properties for disc implants. The application of FRMs may resolve these problems to some extent. In this review, six parts such as background of FRMs in tissue repair, the comparison of mechanical properties between natural disc and some typical FRMs, the repair standard and FRMs applications in disc repair, and the possible research directions for FRMs' in the future are stated.

Sign in / Sign up

Export Citation Format

Share Document