scholarly journals Deformation and Compressive Strength of Steel Fiber Reinforced MgO Concrete

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3617 ◽  
Author(s):  
Feifei Jiang ◽  
Zhongyang Mao ◽  
Min Deng ◽  
Dawang Li
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Interfacial Bond ◽  
Interfacial Bond Strength ◽  
Ordinary Concrete ◽  
Brittle Behavior ◽  
Compressive Strength Of Concrete ◽  
Mgo Concrete

To reduce the cracking caused by shrinkage and avoid the brittle behavior of concrete, MgO expansion agent and steel fibers were used in this paper. Firstly, the effect of MgO and steel fibers on the compressive strength of concrete was compared. The results showed that the compressive strength of steel fibers reinforced concrete (SC) and steel fiber reinforced MgO concrete (SMC) was significantly improved. Compared with ordinary concrete (OC), SMC’s 28 days compressive strength increased by 19.8%. Secondly, the influence of MgO and steel fibers with different contents on the self-volumetric deformation of concrete was compared through the experiment. The results showed that as a result of the hydration expansion of MgO, MC and SMC both showed obvious expansion, and their 190 days expansion was 335 μ ε and 288 μ ε , respectively. Lastly, through a scanning electron microscope (SEM) test, it was found that the constraint effect of steel fibers changed the expansion mode of MgO from outward expansion to inward extrusion, thus improving the interfacial bond strength of concrete.

Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)

2010 ◽  
Vol 34-35 ◽  
pp. 1441-1444 ◽  
Author(s):  
Ju Zhang ◽  
Chang Wang Yan ◽  
Jin Qing Jia
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Strength Concrete

This paper investigates the compressive strength and splitting tensile strength of ultra high strength concrete containing steel fiber. The steel fibers were added at the volume fractions of 0%, 0.5%, 0.75%, 1.0% and 1.5%. The compressive strength of the steel fiber reinforced ultra high strength concrete (SFRC) reached a maximum at 0.75% volume fraction, being a 15.5% improvement over the UHSC. The splitting tensile strength of the SFRC improved with increasing the volume fraction, achieving 91.9% improvements at 1.5% volume fraction. Strength models were established to predict the compressive and splitting tensile strengths of the SFRC. The models give predictions matching the measurements. Conclusions can be drawn that the marked brittleness with low tensile strength and strain capacities of ultra high strength concrete (UHSC) can be overcome by the addition of steel fibers.

Anchorage Capacity of Headed Bars in Steel Fiber Reinforced Concrete

2021 ◽  
Author(s):  
Payal Sachdeva ◽  
A.B. Danie Roy ◽  
Naveen Kwatra
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Failure Modes ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Concrete Compressive Strength ◽  
Pull Out

Headed bars (HB) with different head shapes (Square, Circular, and Rectangular) and bar diameters (db: 16, 20, and 25 mm) embedded in steel fiber reinforced concrete have been subjected to pull-out test. The influence of head shapes, concrete compressive strength (M20 and M40), db, and steel fibers (0, 0.5, 1, and 1.5%) on the anchorage capacity of HB have been evaluated. Numerical model for improving the anchorage capacity of HB has also been proposed. Results have revealed that the anchorage capacity of HB increases with the increase in concrete compressive strength, db, and steel fibers, which have been validated by non-linear regression analysis using dummy variables. Two failure modes namely, steel and concrete-blowout have been observed and the prevailing mode of failure is steel failure. Based on load-deflection curves and derived descriptive equations, it is observed that the circular HB has displayed the highest peak load.

scholarly journals The Effect of Steel Fibers Type and Content on the Development of Fresh and Hardened Properties and Durability of Selfconsolidating Concrete

2021 ◽  
Author(s):  
Nirmal Tamrakar
Keyword(s):  
Compressive Strength ◽  
Bond Strength ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Ring Test ◽  
Fiber Reinforced ◽  
Chloride Permeability ◽  
Freeze Thaw

Steel fiber reinforced self-consolidated concrete (SFRSCC) has the advantages of both selfconsolidated concrete and fiber reinforced concrete. Thirteen concrete mixtures (with short and long steel fiber) were prepared including control mix. The steel fiber volume fraction varied from 0 to 2.4% by the volume of concrete. The fresh properties of SCC were evaluated using slump flow test, J-ring test, V-funnel test and L-Box test. Bond strength, compressive strength and flexural tests were performed in order to investigate mechanical properties. Water sorptivity, water absorption and porosity, rapid chloride permeability test (RCPT), corrosion and freezethaw cycles tests were performed in order to investigate the durability properties. Bond strength gain of 244% with respect to control mix was observed. Moreover, the compressive strength and MOR gained 45% and 127%, respectively. There was no significant weight loss of the concrete specimen after freeze-thaw cycles for concrete mixture with steel fibers. However, flexural toughness was reduced after freeze-thaw cycles.

scholarly journals Relationship between Density and Early Compressive Strength of Slurry Infiltrated Fiber Reinforced Concrete (SIFCON)

2021 ◽  
Vol 2129 (1) ◽  
pp. 012062
Author(s):  
Mustaqqim Abdul Rahim ◽  
Lim Jiann Jonq ◽  
Afizah Ayob ◽  
Shamilah Anudai Anuar ◽  
Nor Faizah Bawadi ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Mechanical Characteristics ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Concrete Compressive Strength ◽  
Ordinary Concrete ◽  
Percentage Volume ◽  
Physical And Mechanical Characteristics

Abstract The aim of the study is to study the physical and mechanical characteristics of Slurry Infiltrated Fiber Reinforced Concrete with fiber percentage volume of 5% and lower. For the testing of physical characteristics of the concrete, density test been conducted. For the testing of mechanical characteristics, compression test used to determine strength of concrete sample. The density of Slurry Infiltrated Fiber Reinforced Concrete increased when the usage of steel fiber percentage volume increases from 1% to 5%, nevertheless when compared to density of ordinary concrete, ordinary concrete is denser. For the significant of study, the mechanical properties of Slurry Infiltrated Fiber Reinforced Concrete, compressive strength increased when the fiber content increases from 1% to 5% percentage volume.

scholarly journals Study on the Mechanical Properties and Frost Resistance of Multiple Modified Concrete

2021 ◽  
Author(s):  
Xiaosa Yuan ◽  
Li Zhang ◽  
Xinxiao Chen ◽  
Fang Liu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Frost Resistance ◽  
Steel Fiber ◽  
Freeze Thaw ◽  
Ordinary Concrete ◽  
Compressive Strength Of Concrete ◽  
Better Than ◽  
Mixed Concrete

Abstract To study the effects of graphene oxide (GO), fly ash, and steel fiber on the mechanical properties and durability of concrete, the mechanical properties, frost resistance, and internal pore structure of modified concrete are investigated by compression tests, freeze–thaw cycle tests, and industrial computed tomography (CT) tests. The test results show that the compressive strength of concrete with GO is better than that of mixed concrete, concrete mixed with only steel fiber, and ordinary concrete. Further, it is strongest at all ages when the GO content is 0.03%; the compressive strength of mixed concrete with 30% of fly ash is generally better than that with 15% and 45% of fly ash. In general, the frost resistance of concrete with only GO is better than that of ordinary concrete. With the increase in fly ash content, the internal porosity of concrete decreases, and its compressive strength increases accordingly; as GO increases, the porosity decreases and then increases, with the lowest porosity and the highest compressive strength of concrete at 0.03% of GO. With an increase in porosity, the mass loss and relative dynamic elastic modulus of concrete increase after 100 freeze–thaw cycles, which indicates that porosity directly affects the frost resistance of concrete.

scholarly journals HYBRID FIBER REINFORCED CONCRETE WITH POZZOLANIC MATERIALS

2020 ◽  
Vol 1 (1) ◽  
pp. 16-24
Author(s):  
Saeid Golizadeh Fard
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Bending Strength ◽  
Steel Fiber ◽  
Low Cost ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Micro Cracks ◽  
Pozzolanic Materials

This paper investigates the possibility of combining steel fibers with different weight percentages along with their functions in increasing compressive strength, indirect tensile strength and bending strength. It`s been considered an important economic issue for a long time the ability to service and increase the load-bearing capacity of structural materials. Concrete as a widely used structural material is widely used today. Despite its remarkable properties including high ductility, high durability, longevity, availability and low cost, concrete is a brittle material and performs extremely poor under flexural and tensile loads. In general, the breakdown and destruction of concrete is strongly dependent on the formation of cracks and micro-cracks. As the loading increases, the micro-cracks interconnect and form cracks. In order to address this problem and to create homogeneous conditions, a series of thin filaments has been used throughout the concrete in recent decades; They are called fibers. Steel fiber is one of the most commonly used fibers in concrete. In this study, the compressive strength of concrete was investigated which in some specimens reinforced with steel and containing pozzolanic materials, the compressive strength of control samples increased with the use of fiber etc. In the present study, the flexural and tensile strength of steel fiber reinforced specimens were investigated. According to the results, flexural strength increases with increase in steel fibers. The designs contain 1%, 1.5% and 2% of the Dramix hooked steel fibers used in the research. By reinforcing the specimens with steel fibers, the behavior of tensile concrete is much more flexible than that of non-steel specimens.

scholarly journals The Effect of Steel Fibers Type and Content on the Development of Fresh and Hardened Properties and Durability of Selfconsolidating Concrete

2021 ◽  
Author(s):  
Nirmal Tamrakar
Keyword(s):  
Compressive Strength ◽  
Bond Strength ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Ring Test ◽  
Fiber Reinforced ◽  
Chloride Permeability ◽  
Freeze Thaw

Steel fiber reinforced self-consolidated concrete (SFRSCC) has the advantages of both selfconsolidated concrete and fiber reinforced concrete. Thirteen concrete mixtures (with short and long steel fiber) were prepared including control mix. The steel fiber volume fraction varied from 0 to 2.4% by the volume of concrete. The fresh properties of SCC were evaluated using slump flow test, J-ring test, V-funnel test and L-Box test. Bond strength, compressive strength and flexural tests were performed in order to investigate mechanical properties. Water sorptivity, water absorption and porosity, rapid chloride permeability test (RCPT), corrosion and freezethaw cycles tests were performed in order to investigate the durability properties. Bond strength gain of 244% with respect to control mix was observed. Moreover, the compressive strength and MOR gained 45% and 127%, respectively. There was no significant weight loss of the concrete specimen after freeze-thaw cycles for concrete mixture with steel fibers. However, flexural toughness was reduced after freeze-thaw cycles.

Experimental Study on Mechanical Properties of Steel Fiber Reinforced High Performance Concrete

2013 ◽  
Vol 859 ◽  
pp. 56-59 ◽  
Author(s):  
Yong Qiang Ma
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Flexural Strength ◽  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced

A large number of experiments have been carried out in this study to reveal the effect of the steel fiber dosage on the mechanical properties of HPC (high performance concrete). The mechanical property includes compressive strength, elastic modulus and flexural strength. The results indicate that the addition of steel fiber increase the compressive strength, elastic modulus and flexural strength of HPC. When the steel fiber dosage is less than 2%, these mechanical property parameters are increasing gradually with the increase of steel fiber dosage, while these parameters begin to decrease when the steel fiber dosage is more than 2%. With the development of HPC, the application of steel fibers in HPC becomes more and more popular. In the actual construction of steel fiber reinforced HPC, the dosage of steel fiber should be controlled strictly in order to ensure that the steel fibers can perform their best improvement on high performance concrete.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Sign in / Sign up

Export Citation Format

Share Document