scholarly journals A Continuum Damage Model for Intralaminar Progressive Failure Analysis of CFRP Laminates Based on the Modified Puck’s Theory

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3292
Author(s):  
Gu ◽  
Li ◽  
Su
Keyword(s):  
Coordinate System ◽  
Progressive Failure ◽  
Failure Process ◽  
Damage Model ◽  
Fracture Plane ◽  
Continuum Damage ◽  
Fiber Fracture ◽  
Continuum Damage Model ◽  
Cfrp Laminates ◽  
Damage Initiation

A continuum damage model is proposed to predict the intralaminar progressive failure of CFRP laminates based on the modified Puck’s theory. Puck’s failure criteria, with consideration of the in situ strength effect, are employed to evaluate the onset of intralaminar failure including fiber fracture and inter-fiber fracture. After damage initiation, a bilinear constitutive relation is used to describe the damage evolution process. In strict accordance with Puck’s concept of action plane, the extent of damage is quantified by the damage variables defined in the fracture plane coordinate system, rather than the traditional material principal coordinate system. Theoretical and experimental evaluation of CFRP laminates under different loading conditions demonstrates the rationality and effectiveness of the proposed numerical model. The model has been successfully implemented in a finite element (FE) software to simulate the intralaminar progressive failure process of CFRP laminates. A good agreement between the experimental and numerical results demonstrates that the present model is capable of predicting the intralaminar failure of CFRP laminates.

Cross-Ply Laminates under Static Three-Point Bending: A Numerical Development Model

2012 ◽  
Vol 498 ◽  
pp. 42-54 ◽  
Author(s):  
S. Benbelaid ◽  
B. Bezzazi ◽  
A. Bezazi
Keyword(s):  
Numerical Model ◽  
Damage Mechanics ◽  
Progressive Failure ◽  
Damage Model ◽  
Continuum Damage Mechanics ◽  
Failure Criteria ◽  
Continuum Damage ◽  
Damage Development ◽  
Element Analysis ◽  
Progressive Failure Analysis

This paper considers damage development mechanisms in cross-ply laminates using an accurate numerical model. Under static three points bending, two modes of damage progression in cross-ply laminates are predominated: transverse cracking and delamination. However, this second mode of damage is not accounted in our numerical model. After a general review of experimental approaches of observed behavior of laminates, the focus is laid on predicting laminate behavior based on continuum damage mechanics. In this study, a continuum damage model based on ply failure criteria is presented, which is initially proposed by Ladevèze. To reveal the effect of different stacking sequence of the laminate; such as thickness and the interior or exterior disposition of the 0° and 90° oriented layers in the laminate, an equivalent damage accumulation which cover all ply failure mechanisms has been predicted. However, the solution algorithm using finite element analysis which implements progressive failure analysis is summarized. The results of the numerical computation have been justified by the previous published experimental observations of the authors.

Study of the progressive failure of concrete by phase field modeling and experiments

2021 ◽  
pp. 105678952110014
Author(s):  
Jichang Wang ◽  
Xiaoming Guo ◽  
Nailong Zhang
Keyword(s):  
Phase Field ◽  
Progressive Failure ◽  
Failure Process ◽  
Damage Model ◽  
Concrete Fracture ◽  
Opening Displacement ◽  
Three Point Bending ◽  
Edge Notch ◽  
Modeling And Experiments ◽  
Crack Faces

In this research, experiments and numerical simulations are employed to research the failure process of concrete. Fracture experiments on three-point bending (TPB) concrete beams with a prefabricated edge notch at the middle of the beam bottom are performed using a modified rigid testing instrument. The characteristics of the crack and section are analyzed, including the crack tensile opening displacement, crack length and width, and crack faces characteristics. Also, the full curves of the force-crack tensile opening displacement (CMOD) and force-deflection of the TPB beams with the prefabricated edge notch after breakage are obtained. The phase field (PF) damage model is applied to the mixed-mode and mode-I failure processes of concrete structures through the ABAQUS subroutine user defined element (UEL). The crack path and the full curves of force-CMOD and force-deflection obtained by numerical calculations are consistent with the experimental results and the calculated results of other researchers. The influences of the mesh sizes, initial lengths, and notched depths on the TPB beam of concrete are also analyzed.

Modified Dyson Continuum Damage Model for Austenitic Steel Alloy

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Seok Jun Kang ◽  
Hoomin Lee ◽  
Jae Boong Choi ◽  
Moon Ki Kim
Keyword(s):  
Damage Model ◽  
Life Time ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Tests ◽  
Continuum Damage Model ◽  
Thermal Plant ◽  
Uniaxial Creep ◽  
Term Creep

Ultrasuper critical (USC) thermal plants are now in operation around the globe. Their applications include superheaters and reheaters, which generally require high temperature/pressure conditions. To withstand these harsh conditions, an austenitic heat-resistant HR3C (ASME TP310NbN) steel was developed for metal creep resistance. As the designed life time of a typical thermal plant is 150,000 h, it is very important to predict long-term creep behavior. In this study, a three-state variable continuum damage model (CDM) was modified for better estimation of long-term creep life. Accelerated uniaxial creep tests were performed to determine the material parameters. Also, the rupture type and microstructural precipitation were observed by scanning electron microscopy. The creep life of HR3C steel was predicted using only relatively short-term creep test data and was then successfully verified by comparison with the long-term creep data.

Failure Predictions for DP Steel Cross-die Test using Anisotropic Damage

2011 ◽  
Vol 21 (5) ◽  
pp. 713-754 ◽  
Author(s):  
M. S. Niazi ◽  
H. H. Wisselink ◽  
T. Meinders ◽  
J. Huétink
Keyword(s):  
Strain Rate ◽  
Damage Evolution ◽  
Damage Model ◽  
Anisotropic Damage ◽  
Continuum Damage ◽  
Anisotropic Plasticity ◽  
Continuum Damage Model ◽  
Damage Models ◽  
Isotropic Damage ◽  
Failure Predictions

The Lemaitre's continuum damage model is well known in the field of damage mechanics. The anisotropic damage model given by Lemaitre is relatively simple, applicable to nonproportional loads and uses only four damage parameters. The hypothesis of strain equivalence is used to map the effective stress to the nominal stress. Both the isotropic and anisotropic damage models from Lemaitre are implemented in an in-house implicit finite element code. The damage model is coupled with an elasto-plastic material model using anisotropic plasticity (Hill-48 yield criterion) and strain-rate dependent isotropic hardening. The Lemaitre continuum damage model is based on the small strain assumption; therefore, the model is implemented in an incremental co-rotational framework to make it applicable for large strains. The damage dissipation potential was slightly adapted to incorporate a different damage evolution behavior under compression and tension. A tensile test and a low-cycle fatigue test were used to determine the damage parameters. The damage evolution was modified to incorporate strain rate sensitivity by making two of the damage parameters a function of strain rate. The model is applied to predict failure in a cross-die deep drawing process, which is well known for having a wide variety of strains and strain path changes. The failure predictions obtained from the anisotropic damage models are in good agreement with the experimental results, whereas the predictions obtained from the isotropic damage model are slightly conservative. The anisotropic damage model predicts the crack direction more accurately compared to the predictions based on principal stress directions using the isotropic damage model. The set of damage parameters, determined in a uniaxial condition, gives a good failure prediction under other triaxiality conditions.

Sign in / Sign up

Export Citation Format

Share Document