scholarly journals Discrete Element Mesoscale Modeling of Recycled Lump Concrete under Axial Compression

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3140 ◽  
Author(s):  
Yong Yu ◽  
Bo Wu
Keyword(s):  
Mechanical Properties ◽  
Axial Compression ◽  
Discrete Element ◽  
Relative Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Ordinary Concrete ◽  
Coarse Aggregates ◽  
Spatial Locations

In the past decade, directly reusing large pieces of coarsely crushed concrete (referred to as demolished concrete lumps or DCLs) with fresh concrete in new construction was demonstrated as an efficient technique for the recycling of waste concrete. Previous studies investigated the mechanical properties of recycled lump concrete (RLC) containing different sizes of DCLs; however, for actual application of this kind of concrete, little information is known about the influence of the spatial locations of DCLs and coarse aggregates on the concrete strength. Moreover, the mechanical responses of such a concrete containing various shapes of DCLs are also not well illustrated. To add knowledge related to these topics, two-dimensional mesoscale simulations of RLC containing DCLs under axial compression were performed using the discrete element method. The main variables of interest were the relative strength of the new and old concrete, the distribution of the lumps and other coarse aggregates, and the shape of the lumps. In addition, the differences in compression behavior between RLC and recycled aggregate concrete were also predicted. The numerical results indicate that the influence tendency of the spatial locations of DCLs and coarse aggregate pieces on the compressive stress–strain curves for RLC is similar to that of the locations of coarse aggregates for ordinary concrete. The strength variability of RLC is generally higher than that of ordinary concrete, regardless of the relative strength of the new and old concrete included; however, variability has no monotonic trend with an increase in the lump replacement ratio. The mechanical properties of RLC in compression are little influenced by the geometric shape of DCLs as long as the ratio of the length of their long axis to short axis is smaller than 2.0. The compressive strength and elastic modulus of RLC are always superior to those of recycled aggregate concrete designed with a conventional mixing method.

Effects of maximum particle size of coarse aggregates and steel fiber contents on the mechanical properties and impact resistance of recycled aggregate concrete

2021 ◽  
pp. 136943322110179
Author(s):  
DongTao Xia ◽  
ShaoJun Xie ◽  
Min Fu ◽  
Feng Zhu
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Steel Fiber ◽  
Impact Resistance ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Maximum Particle Size ◽  
Maximum Particle

Fiber reinforced recycled aggregate concrete has become a new type of green concrete material. The maximum particle size of coarse aggregates and steel fiber contents affect the mechanical properties and impact resistance of recycled aggregate concrete. However, such studies are rare in literature. The present paper shortens the gap through experimental study. A total of 144 specimens of 12 kinds of concrete mixtures were tested, which adopted different steel fiber volume admixtures (0%, 0.8%, 1.0%, 1.2%) and recycled coarse aggregates in different maximum particle sizes (9.5, 19, 31.5 mm) replacing 30% natural coarse aggregate. The compressive strength, splitting tensile strength, and impact resistance of the 12 concrete mixtures were tested. The results showed that the compressive strength, splitting tensile strength, and impact resistance of recycled aggregate concrete increased first and then decreased with the increase of the maximum particle size. The recycled aggregate concrete with the maximum particle size of 19 mm had the highest mechanical properties and impact resistance. Besides, with the increase of steel fiber content, the compressive strength, splitting tensile strength, and impact resistance of recycled aggregate concrete showed an increasing trend. Considering a large amount of experimental data and the coupling effect of steel fiber contents and the maximum particle size of coarse aggregates, the Weibull distribution function was introduced to analyze the impact test results and predict the number of resistance to impact under different failure probabilities. The results showed that the number of blows of the recycled aggregate concrete followed a two-parameter Weibull distribution, and the estimated value of the number of resistance to impact for failure increased with the increase of the failure probability.

Performance Enhancement of Recycled Aggregate Concrete – An Experimental Study

2021 ◽  
Author(s):  
Sivamani Jagan ◽  
Thurvas Renganathan Neelakantan ◽  
Palaniraj Saravanakumar
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Elastic Modulus ◽  
Performance Enhancement ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Durability Properties ◽  
Concrete Mixtures

Extensive studies have been performed on the mechanical and durability properties of the concrete prepared with recycled coarse aggregates (RCA), however, only modest consideration has been given to the studies on the behaviour of RAC prepared by alternative mixing approach techniques. This study presents the mechanical properties of the recycled aggregate concrete (RAC) with different percentages of RCA prepared by normal mixing approach (NMA), two-stage mixing approach (TSMA) and sand enveloped mixing approach (SEMA) techniques. The manufactured concrete mixtures were tested for compression, tension, flexure and elastic modulus at 7, 28 and 90 days. The results indicate that the mechanical properties of the RAC (with 100% of RCA) prepared through TSMA and SEMA were improved by 9.36 and 12.14% at 28 days. Perhaps, prolonged curing to TSMA and SEMA mixtures improved the mechanical properties of the RAC that is nearly equal to normal aggregate concrete (NAC) prepared by NMA.

EFFECT OF DIFFERENT TYPES OF FIBER UTILIZATION ON MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE CONTAINING SILICA FUME

2020 ◽  
Vol 15 (1) ◽  
pp. 119-136 ◽  
Author(s):  
Muhammet Gökhan Altun ◽  
Meral Oltulu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hybrid Fibers ◽  
Normal Concrete ◽  
Aggregate Concrete ◽  
Volume Fractions ◽  
Coarse Aggregates

ABSTRACT The use of recycled aggregate (RA) instead of natural aggregate (NA) in concrete is necessary for environmental protection and the effective utilization of resources. The addition of recycled aggregates in concrete increases shrinkage, porosity and decreases the mechanical properties compared to that of normal concrete. This study was aimed at investigating how the addition of various proportions of polypropylene and steel fiber affect the mechanical properties of recycled aggregate concrete (RAC). The natural coarse aggregates (NCAs) used in the production of normal concrete (NC) were replaced in 30% and 50% proportions by recycled coarse aggregates (RCAs) obtained from the demolished buildings. In this case, a polypropylene fiber (PF) content of 0.1% and steel fiber (SF) 1% and 2% volume fractions were used, along with hybrid fibers-a combination of the two. While the material performance of RAC compared to NC is analyzed by reviewing existing published literature, it is not evident what the use of RCAs and hybrid fibers have on the mechanical properties of concrete. The results showed that the compressive strength, flexural strength and impcat resistance of RAC were reduced as the percentage of RCAs increased. It was observed that the compressive strength was increased with the addition of 1% steel fiber in the RAC. The flexural and impact performance of steel fiber-reinforced concrete (Specimens NC and RAC) was increased as the volume fractions of steel fiber increased. The hybrid fiber reinforced concretes showed the best results in their mechanical performance of all the concrete groups.

scholarly journals Experimental Study on the Mechanical Properties and Compression Size Effect of Recycled Aggregate Concrete

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2323
Author(s):  
Yubing Du ◽  
Zhiqing Zhao ◽  
Qiang Xiao ◽  
Feiting Shi ◽  
Jianming Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Size Effect ◽  
Compressive Stress ◽  
Failure Modes ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Substitution Ratio ◽  
The Impact

To explore the basic mechanical properties and size effects of recycled aggregate concrete (RAC) with different substitution ratios of coarse recycled concrete aggregates (CRCAs) to replace natural coarse aggregates (NCA), the failure modes and mechanical parameters of RAC under different loading conditions including compression, splitting tensile resistance and direct shear were compared and analyzed. The conclusions drawn are as follows: the failure mechanisms of concrete with different substitution ratios of CRCAs are similar; with the increase in substitution ratio, the peak compressive stress and peak tensile stress of RAC decrease gradually, the splitting limit displacement decreases, and the splitting tensile modulus slightly increases; with the increase in the concrete cube’s side length, the peak compressive stress of RAC declines gradually, but the integrity after compression is gradually improved; and the increase in the substitution ratio of the recycled aggregate reduces the impact of the size effect on the peak compressive stress of RAC. Furthermore, an influence equation of the coupling effect of the substitution ratio and size effect on the peak compressive stress of RAC was quantitatively established. The research results are of great significance for the engineering application of RAC and the strength selection of RAC structure design.

scholarly journals Experimental Study on a Prediction Model of the Shrinkage and Creep of Recycled Aggregate Concrete

2019 ◽  
Vol 9 (20) ◽  
pp. 4322 ◽  
Author(s):  
Lv ◽  
Liu ◽  
Zhu ◽  
Bai ◽  
Qi
Keyword(s):  
Substitution Rate ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Creep Model ◽  
Aggregate Concrete ◽  
Ordinary Concrete ◽  
Group I ◽  
Significant Difference ◽  
Shrinkage And Creep ◽  
Group Ii

The significant difference between recycled aggregate and natural aggregate is the content of the attached mortar layer. With the increase of the replacement rate of recycled aggregate, the shrinkage and creep of recycled aggregate concrete is significantly increased. In this paper, 180-day shrinkage and creep tests of recycled aggregate concrete with different water–cement ratios were designed in order to analyze the effect of the substitution rate and water–cement ratio on shrinkage and creep properties. The results show that the shrinkage strain of recycled aggregate concrete with a substitution rate of 50% and 100% at 180 days is 26% and 48% higher than that of ordinary concrete, respectively, and the growth of group II is 22% and 47%, respectively. When the load was 180 days old, the creep coefficient of recycled aggregate concrete with a substitution rate of 50% and 100% in group I increased by 19.6% and 39.6%, respectively compared with ordinary concrete, and group II increased by 23.6% and 44.3%, respectively. Based on the difference of adhering mortar content, the creeping increase coefficient and shrinkage increase coefficient of the attached mortar were proposed, and a shrinkage and creep model of recycled aggregate concrete was established. When compared with the experimental results, the model calculation results met the accuracy requirements.

Sign in / Sign up

Export Citation Format

Share Document