scholarly journals Exploiting Reactor Geometry to Manipulate the Properties of Plasma Polymerized Acrylic Acid Films

Materials ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 2597 ◽  
Author(s):  
Karyn Jarvis ◽  
Sally McArthur
Keyword(s):  
Acrylic Acid ◽  
Photoelectron Spectroscopy ◽  
Plasma Reactor ◽  
Electrode Position ◽  
Film Properties ◽  
X Ray ◽  
Before And After ◽  
Reactor Geometry ◽  
Frequency Generator ◽  
Radio Frequency Generator

A number of different reactor geometries can be used to deposit plasma polymer films containing specific functional groups and result in films with differing properties. Plasma polymerization was carried out in a low-pressure custom-built stainless steel T-shaped reactor using a radio frequency generator. The internal aluminium disk electrode was positioned in two different geometries: parallel and perpendicular to the samples at varying distances to demonstrate the effect of varying the electrode position and distance from the electrode on the properties of plasma polymerized acrylic acid (ppAAc) films. The surface chemistry and film thickness before and after aqueous immersion were analysed via X-ray photoelectron spectroscopy and spectroscopic ellipsometry, respectively. For a perpendicular electrode, the ppAAc film thicknesses and aqueous stability decreased while the COOH/R group concentrations increased as the distance from the electrode increased due to decreased fragmentation. For films deposited at similar distances from the electrode, those deposited with the parallel electrode were thicker, had lower COOH/R group concentrations and greater aqueous stability. These results demonstrate the necessity of having a well characterized plasma reactor to enable the deposition of films with specific properties and how reactor geometry can be exploited to tailor film properties.

scholarly journals Synthesis of Novel Arginine-Based Flame Retardant and Its Application in Lyocell Fabric

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3588
Author(s):  
Jiayi Chen ◽  
Yansong Liu ◽  
Jiayue Zhang ◽  
Yuanlin Ren ◽  
Xiaohui Liu
Keyword(s):  
Fourier Transform ◽  
Heat Release ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Fourier Transform Infrared ◽  
Ftir Analysis ◽  
Excellent Thermal Stability ◽  
X Ray ◽  
Cone Calorimeter Test ◽  
Before And After

Lyocell fabrics are widely applied in textiles, however, its high flammability increases the risk of fire. Therefore, to resolve the issue, a novel biomass-based flame retardant with phosphorus and nitrogen elements was designed and synthesized by the reaction of arginine with phosphoric acid and urea. It was then grafted onto the lyocell fabric by a dip-dry-cure technique to prepare durable flame-retardant lyocell fabric (FR-lyocell). X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated that the flame retardant was successfully introduced into the lyocell sample. Thermogravimetric (TG) and Raman analyses confirmed that the modified lyocell fabric featured excellent thermal stability and significantly increased char residue. Vertical combustion results indicated that FR-lyocell before and after washing formed a complete and dense char layer. Thermogravimetric Fourier-transform infrared (TG-FTIR) analysis suggested that incombustible substances (such as H2O and CO2) were produced and played a significant fire retarding role in the gas phase. The cone calorimeter test corroborated that the peak of heat release rate (PHRR) and total heat release (THR) declined by 89.4% and 56.4%, respectively. These results indicated that the flame retardancy of the lyocell fabric was observably ameliorated.

Oxidation of Alloy-X in Subcritical, Transition, and Supercritical Water

CORROSION ◽  
10.5006/3881 ◽  
2021 ◽  
Author(s):  
Zachary Karmiol ◽  
Dev Chidambaram
Keyword(s):  
Supercritical Water ◽  
Photoelectron Spectroscopy ◽  
Focused Ion Beam ◽  
Elevated Temperatures ◽  
Subcritical Water ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Based Superalloy ◽  
Before And After

This work investigates the oxidation of a nickel based superalloy, namely Alloy X, in water at elevated temperatures: subcritical water at 261°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water at 380°C and 27 MPa for 100 hours. The morphology of the sample surfaces were studied using scanning electron microscopy coupled with focused ion beam milling, and the surface chemistry was investigated using X-ray diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy before and after exposure studies. Surfaces of all samples were identified to comprise of a ferrite spinel containing aluminum.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

scholarly journals Enhanced removal of hexavalent chromium by different acid-modified biochar derived from corn straw: behavior and mechanism

2020 ◽  
Vol 81 (10) ◽  
pp. 2270-2280
Author(s):  
Yonggang Xu ◽  
Tianxia Bai ◽  
Yubo Yan ◽  
Yunfeng Zhao ◽  
Ling Yuan ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrogen Ion ◽  
Corn Straw ◽  
Order Model ◽  
Freundlich Model ◽  
X Ray ◽  
Modified Biochar ◽  
Before And After ◽  
Pseudo Second Order ◽  
Kinetics Of

Abstract It is of great significance to remove Cr(VI) from water as a result of its high toxicity. Biochar from corn straw was modified by different acids (HNO3, H2SO4 and H3PO4) to remove Cr(VI) from aqueous solution. To estimate the removal mechanisms of Cr(VI) by the acid-modified biochars, batch experiments were performed in the light of contact time, Cr(VI) concentration, and pH, and the characteristics of acid-modified biochars before and after Cr(VI) adsorption were investigated by Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS). The adsorption kinetics of Cr(VI) by acid-modified biochars were consistent with the pseudo-second-order model, and the adsorption isotherm obeyed the Freundlich model. Furthermore, the acid- modified biochars could supply more oxygen-containing functional groups (-COOH and -OH) as electron donor (e−) and hydrogen ion (H+) to enhance the reduction of Cr(VI) to Cr(III), resulting in enhanced removal of Cr(VI). HNO3-modified biochar exhibited the highest removal efficiency of Cr(VI). In general, the acid modifition of biochar was an effective method to increase the removal of Cr(VI).

scholarly journals Synthesis of Nanoscale Zerovalent Iron (nZVI) Supported on Biochar for Chromium Remediation from Aqueous Solution and Soil

2019 ◽  
Vol 16 (22) ◽  
pp. 4430 ◽  
Author(s):  
Haixia Wang ◽  
Mingliang Zhang ◽  
Hongyi Li
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Zero Valent Iron ◽  
Zerovalent Iron ◽  
X Ray ◽  
Nanoscale Zerovalent Iron ◽  
Before And After ◽  
Pseudo Second Order ◽  
Xrd Patterns ◽  
Co Precipitation

Maize straw biochar-supported nanoscale zero-valent iron composite (MSB-nZVI) was prepared for efficient chromium (Cr) removal through alleviating the aggregation of zero-valent iron particles. The removal mechanism of MSB-nZVI was investigated by scanning electron microscopy with energy dispersive X-ray (SEM-EDX), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). Cr(VI) removal from aqueous solution by MSB-nZVI was greatly affected by pH and initial concentration. The removal efficiency of Cr(VI) decreased with increasing pH, and the removal kinetics followed the pseudo-second-order model. XRD patterns of MSB-nZVI before and after reaction showed that reduction and precipitation/co-precipitation (FeCr2O4, Fe3O4, Fe2O3) occurred with the conversion of Cr(VI) to Cr(III) and Fe(0) to Fe(II)/Fe(III). The produced precipitation/co-precipitation could be deposited on the MSB surface rather than being only coated on the surface of nZVI particles, which can alleviate passivation of nZVI. For remediation of Cr(VI)-contaminated saline–alkali soil (pH 8.6–9.0, Cr 341 mg/kg), the released amount of Cr(VI) was 70.7 mg/kg, while it sharply decreased to 0.6–1.7 mg/kg at pH 4.0–8.0, indicating that the saline–alkali environment inhibited the remediation efficiency. These results show that MSB-nZVI can be used as an effective material for Cr(VI) removal from aqueous solution and contaminated soil.

scholarly journals Photocatalytic CO2 Reduction and Electrocatalytic H2 Evolution over Pt(0,II,IV)-Loaded Oxidized Ti Sheets

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1909
Author(s):  
Ju Hyun Yang ◽  
So Jeong Park ◽  
Choong Kyun Rhee ◽  
Youngku Sohn
Keyword(s):  
Hydrogen Evolution ◽  
Photoelectron Spectroscopy ◽  
Co2 Reduction ◽  
Oxidation States ◽  
X Ray ◽  
Catalytic Activities ◽  
Before And After ◽  
Reduction Methods ◽  
Chemical States ◽  
Sputter Deposited

Energy recycling and production using abundant atmospheric CO2 and H2O have increasingly attracted attention for solving energy and environmental problems. Herein, Pt-loaded Ti sheets were prepared by sputter-deposition and Pt4+-reduction methods, and their catalytic activities on both photocatalytic CO2 reduction and electrochemical hydrogen evolution were fully demonstrated. The surface chemical states were completely examined by X-ray photoelectron spectroscopy before and after CO2 reduction. Gas chromatography confirmed that CO, CH4, and CH3OH were commonly produced as CO2 reduction products with total yields up to 87.3, 26.9, and 88.0 μmol/mol, respectively for 700 °C-annealed Ti under UVC irradiation for 13 h. Pt-loading commonly negated the CO2 reduction yields, but CH4 selectivity was increased. Electrochemical hydrogen evolution reaction (HER) activity showed the highest activity for sputter-deposited Pt on 400 °C-annealed Ti with a HER current density of 10.5 mA/cm2 at −0.5 V (vs. Ag/AgCl). The activities of CO2 reduction and HER were found to be significantly dependent on both the nature of Ti support and the oxidation states (0,II,IV) of overlayer Pt. The present result could provide valuable information for designing efficient Pt/Ti-based CO2 recycle photocatalysts and electrochemical hydrogen production catalysts.

A study of adsorption and absorption mechanisms of copper in palygorskite

Clay Minerals ◽  
2008 ◽  
Vol 43 (2) ◽  
pp. 195-203 ◽  
Author(s):  
Y. F. Cai ◽  
J. Y. Xue
Keyword(s):  
Photoelectron Spectroscopy ◽  
Esr Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tetrahedral Sites ◽  
Octahedral Cation ◽  
Spin Resonance ◽  
Before And After ◽  
Cu Ions ◽  
Complex Ion

AbstractDesorption experiments performed on four Cu-adsorbed palygorskites suggest that the leached Cu2+ ion originates at the surface and/or net-like interstice of the palygorskite fibres. The leached fraction, calculated from the quantities of adsorbed Cu2+ before and after desorption, is <1%. This may indicate that the majority of Cu is in inaccessible structural sites. X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared (FTIR) spectroscopy and electron spin resonance (ESR) were used to determine the mineralogical character of the Cu-adsorbed palygorskite. Two photoelectron lines at 932.5 and/or 933.7 eV in the narrow scan Cu 2p3/2 spectra show that Cu adsorbed on the surface of palygorskite is in the Cu+ and Cu2+ state. The stretching vibrations of the octahedral cation shift ~3–5 cm–1 towards a greater wavenumber in the FTIR spectra of Cu-adsorbed palygorskite. It can be deduced that the Cu2+ is trapped in the channel of the palygorskite structure. The ESR spectra of the palygorskite give g values of 2.34, 2.12, 2.08 and 2.05, suggesting that some Cu ions cannot be reached by H+. These results confirm that Cu is adsorbed by palygorskite via three possible mechanisms: (1) the Cu is adsorbed onto the surface or in a net-like interstice, and its oxidation states are +1 and +2; (2) Cu forms a complex ion – [Cu(H2O)4]2+ or [Cu(H2O)6]2+, and is trapped in the channel; or (3) Cu enters into the hexagonal channel of the tetrahedral sites or the unoccupied octahedral sites of palygorskite.

Aqueous Dissolution of Perovskite (CaTiO3): Effects of Surface Damage and [Ca2+] in the Leachant

2005 ◽  
Vol 20 (9) ◽  
pp. 2462-2473 ◽  
Author(s):  
Zhaoming Zhang ◽  
Mark G. Blackford ◽  
Gregory R. Lumpkin ◽  
Katherine L. Smith ◽  
Eric R. Vance
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Mechanical Damage ◽  
Surface Damage ◽  
Dissolution Behavior ◽  
Dissolution Testing ◽  
Cross Sectional ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Before And After

We have characterized thermally annealed perovskite (CaTiO3) surfaces, both before and after aqueous dissolution testing, using scanning electron microscopy, cross-sectional transmission electron microscopy, x-ray photoelectron spectroscopy, and atomic force microscopy. It was shown that mechanical damage caused by polishing was essentially removed at the CaTiO3 surface by subsequent annealing; such annealed samples were used to study the intrinsic dissolution behavior of perovskite in deionized water at RT, 90 °C, and 150 °C. Our results indicate that, although mechanical damage caused higher Ca release initially, it did not affect the long-term Ca dissolution rate. However, the removal of surface damage by annealing did lead to the subsequent spatial ordering of the alteration product, which was identified as anatase (TiO2) by both x-ray and electron diffraction, on CaTiO3 surfaces after dissolution testing at150 °C. The effect of Ca2+ in the leachant on the dissolution reaction of perovskite at 150 °C was also investigated, and the results suggest that under repository conditions, the release of Ca from perovskite is likely to be significantly slower if Ca2+ is present in ground water.

X-ray photoelectron spectroscopic analysis of halloysites with different composition and particle morphology

Clay Minerals ◽  
1992 ◽  
Vol 27 (4) ◽  
pp. 413-421 ◽  
Author(s):  
M. Soma ◽  
G. J. Churchman ◽  
B. K. G. Theng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Cation Exchange Capacity ◽  
Spectroscopic Analysis ◽  
Surface Composition ◽  
Particle Morphology ◽  
Exchange Capacity ◽  
Surface Layers ◽  
X Ray ◽  
Fe Content ◽  
Before And After

AbstractThe surface composition of some halloysites with different particle morphology has been investigated by X-ray photoelectron spectroscopy (XPS) before and after removal of external Fe. The Fe(III) 2p3/2 binding energy of external Fe is appreciably smaller than that of structural Fe. Particle morphology is influenced by structural Fe content. The long-tubular halloysite has very little surface Fe, and its concentration tends to increase with the proportion of non-tubular particles in the samples. The spheroidal sample contains the most structural Fe which, however, does not appear to influence particle shape directly. Study by XPS indicates that Fe substitutes for Al in octahedral positions in approximately 1 : 2 proportion. As a result, an increase in octahedral vacancies and cation exchange capacity would be predicted. Further, halloysite layers within a crystal are generally inhomogeneous in composition. Built up like “onion skins”, the surface layers would either be enriched or depleted in Fe depending on the chemical environment in which crystal growth occurs.

Grain Boundary Diffusion in Co/Cu and Co/Cr Magnetic Thin Films

1993 ◽  
Vol 313 ◽  
Author(s):  
John G. Holl-Pellerin ◽  
S.G.H. Anderson ◽  
P.S. Ho ◽  
K.R. Coffey ◽  
J.K. Howard ◽  
...  
Keyword(s):  
Thin Films ◽  
Activation Energy ◽  
Diffusion Coefficient ◽  
Grain Boundary ◽  
Photoelectron Spectroscopy ◽  
Boundary Diffusion ◽  
Magnetic Thin Films ◽  
Grain Boundary Diffusion ◽  
X Ray ◽  
Before And After

ABSTRACTX-ray photoelectron spectroscopy (XPS) has been used to investigate grain boundary diffusion of Cu and Cr through 1000 Å thick Co films in the temperature range of 325°C to 400°C. Grain boundary diffusivities were determined by modeling the accumulation of Cu or Cr on Co surfaces as a function of time at fixed annealing temperature. The grain boundary diffusivity of Cu through Co is characterized by a diffusion coefficient, D0gb, of 2 × 104 cm2/sec and an activation energy, Ea,gb, of 2.4 eV. Similarly, Cr grain boundary diffusion through Co thin films occurs with a diffusion coefficient, Do,gb, of 6 × 10-2cm2/sec and an activation energy, Ea,gb of 1.8 eV. The Co film microstructure has been investigated before and after annealing by x-ray diffraction and transmission electron Microscopy. Extensive grain growth and texturing of the film occurred during annealing for Co deposited on a Cu underlayer. In contrast, the microstructure of Co deposited on a Cr underlayer remained relatively unchanged upon annealing. Magnetometer Measurements have shown that increased in-plane coercivity Hc, reduced remanence squareness S, and reduced coercive squareness S* result from grain boundary diffusion of Cu and Cr into the Co films.

Sign in / Sign up

Export Citation Format

Share Document