scholarly journals 3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2491 ◽  
Author(s):  
Chunyang Ma ◽  
Le Jiang ◽  
Yingjin Wang ◽  
Fangli Gang ◽  
Nan Xu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Three Dimensional ◽  
Solvent Casting ◽  
Tissue Engineering Scaffolds ◽  
New Era ◽  
Conductive Materials ◽  
Conductive Film ◽  
Traditional Preparation ◽  
Natural Tissue

Inspired by electrically active tissues, conductive materials have been extensively developed for electrically active tissue engineering scaffolds. In addition to excellent conductivity, nanocomposite conductive materials can also provide nanoscale structure similar to the natural extracellular microenvironment. Recently, the combination of three-dimensional (3D) printing and nanotechnology has opened up a new era of conductive tissue engineering scaffolds exhibiting optimized properties and multifunctionality. Furthermore, in the case of two-dimensional (2D) conductive film scaffolds such as periosteum, nerve membrane, skin repair, etc., the traditional preparation process, such as solvent casting, produces 2D films with defects of unequal bubbles and thickness frequently. In this study, poly-l-lactide (PLLA) conductive scaffolds incorporated with polypyrrole (PPy) nanoparticles, which have multiscale structure similar to natural tissue, were prepared by combining extrusion-based low-temperature deposition 3D printing with freeze-drying. Furthermore, we creatively integrated the advantages of 3D printing and solvent casting and successfully developed a 2D conductive film scaffold with no bubbles, uniform thickness, and good structural stability. Subsequently, the effects of concentration and morphology of PPy nanoparticles on electrical properties and mechanical properties of 3D conductive scaffolds and 2D conductive films scaffolds have been studied, which provided a new idea for the design of both 2D and 3D electroactive tissue engineering scaffolds.

scholarly journals Solvent-based Extrusion 3D Printing for the Fabrication of Tissue Engineering Scaffolds

2020 ◽  
Vol 6 (1) ◽  
pp. 19 ◽  
Author(s):  
Bin Zhang ◽  
Rodica Cristescu ◽  
Douglas B. Chrisey ◽  
Roger J. Narayan
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds ◽  
Scaffold Fabrication ◽  
Simultaneous Control ◽  
Scaffold Structure ◽  
3D Printed ◽  
Natural Tissue

Three-dimensional (3D) printing has been emerging as a new technology for scaffold fabrication to overcome the problems associated with the undesirable microstructure associated with the use of traditional methods. Solvent-based extrusion (SBE) 3D printing is a popular 3D printing method, which enables incorporation of cells during the scaffold printing process. The scaffold can be customized by optimizing the scaffold structure, biomaterial, and cells to mimic the properties of natural tissue. However, several technical challenges prevent SBE 3D printing from translation to clinical use, such as the properties of current biomaterials, the difficulties associated with simultaneous control of multiple biomaterials and cells, and the scaffold-to-scaffold variability of current 3D printed scaffolds. In this review paper, a summary of SBE 3D printing for tissue engineering (TE) is provided. The influences of parameters such as ink biomaterials, ink rheological behavior, cross-linking mechanisms, and printing parameters on scaffold fabrication are considered. The printed scaffold structure, mechanical properties, degradation, and biocompatibility of the scaffolds are summarized. It is believed that a better understanding of the scaffold fabrication process and assessment methods can improve the functionality of SBE-manufactured 3D printed scaffolds.

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

scholarly journals Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 353
Author(s):  
Yanting Han ◽  
Qianqian Wei ◽  
Pengbo Chang ◽  
Kehui Hu ◽  
Oseweuba Valentine Okoro ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Biomedical Application ◽  
Three Dimensional ◽  
Antibacterial Properties ◽  
Natural Polymers ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
Dental Applications ◽  
Hard Tissue Engineering

Hydroxyapatite (HA) and HA-based nanocomposites have been recognized as ideal biomaterials in hard tissue engineering because of their compositional similarity to bioapatite. However, the traditional HA-based nanocomposites fabrication techniques still limit the utilization of HA in bone, cartilage, dental, applications, and other fields. In recent years, three-dimensional (3D) printing has been shown to provide a fast, precise, controllable, and scalable fabrication approach for the synthesis of HA-based scaffolds. This review therefore explores available 3D printing technologies for the preparation of porous HA-based nanocomposites. In the present review, different 3D printed HA-based scaffolds composited with natural polymers and/or synthetic polymers are discussed. Furthermore, the desired properties of HA-based composites via 3D printing such as porosity, mechanical properties, biodegradability, and antibacterial properties are extensively explored. Lastly, the applications and the next generation of HA-based nanocomposites for tissue engineering are discussed.

scholarly journals Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

2020 ◽  
Vol 6 (1) ◽  
pp. 57-69
Author(s):  
Amirhosein Fathi ◽  
Farzad Kermani ◽  
Aliasghar Behnamghader ◽  
Sara Banijamali ◽  
Masoud Mozafari ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Composite Scaffolds ◽  
3D Printed ◽  
Co Doped

AbstractOver the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30% of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 × 12 × 2 mm3.The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials.

scholarly journals Polymeric Bioinks for 3D Hepatic Printing

Chemistry ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 164-181
Author(s):  
Joyita Sarkar ◽  
Swapnil C. Kamble ◽  
Nilambari C. Kashikar
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Soft Tissues ◽  
Three Dimensional ◽  
Stem Cell Differentiation ◽  
Synthetic Polymers ◽  
Bioactive Molecules ◽  
Complex Geometries ◽  
Printing Techniques ◽  
Natural And Synthetic

Three-dimensional (3D) printing techniques have revolutionized the field of tissue engineering. This is especially favorable to construct intricate tissues such as liver, as 3D printing allows for the precise delivery of biomaterials, cells and bioactive molecules in complex geometries. Bioinks made of polymers, of both natural and synthetic origin, have been very beneficial to printing soft tissues such as liver. Using polymeric bioinks, 3D hepatic structures are printed with or without cells and biomolecules, and have been used for different tissue engineering applications. In this review, with the introduction to basic 3D printing techniques, we discuss different natural and synthetic polymers including decellularized matrices that have been employed for the 3D bioprinting of hepatic structures. Finally, we focus on recent advances in polymeric bioinks for 3D hepatic printing and their applications. The studies indicate that much work has been devoted to improvising the design, stability and longevity of the printed structures. Others focus on the printing of tissue engineered hepatic structures for applications in drug screening, regenerative medicine and disease models. More attention must now be diverted to developing personalized structures and stem cell differentiation to hepatic lineage.

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

scholarly journals Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends

2021 ◽  
Vol 2021 ◽  
pp. 1-20 ◽  
Author(s):  
Dhinakaran Veeman ◽  
M. Swapna Sai ◽  
P. Sureshkumar ◽  
T. Jagadeesha ◽  
L. Natrayan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Tissue Regeneration ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Wide Range ◽  
Potential Applications ◽  
Pharmaceutical Industries

As a technique of producing fabric engineering scaffolds, three-dimensional (3D) printing has tremendous possibilities. 3D printing applications are restricted to a wide range of biomaterials in the field of regenerative medicine and tissue engineering. Due to their biocompatibility, bioactiveness, and biodegradability, biopolymers such as collagen, alginate, silk fibroin, chitosan, alginate, cellulose, and starch are used in a variety of fields, including the food, biomedical, regeneration, agriculture, packaging, and pharmaceutical industries. The benefits of producing 3D-printed scaffolds are many, including the capacity to produce complicated geometries, porosity, and multicell coculture and to take growth factors into account. In particular, the additional production of biopolymers offers new options to produce 3D structures and materials with specialised patterns and properties. In the realm of tissue engineering and regenerative medicine (TERM), important progress has been accomplished; now, several state-of-the-art techniques are used to produce porous scaffolds for organ or tissue regeneration to be suited for tissue technology. Natural biopolymeric materials are often better suited for designing and manufacturing healing equipment than temporary implants and tissue regeneration materials owing to its appropriate properties and biocompatibility. The review focuses on the additive manufacturing of biopolymers with significant changes, advancements, trends, and developments in regenerative medicine and tissue engineering with potential applications.

scholarly journals Three-Dimensional Microfluidic Tissue-Engineering Scaffolds Using a Flexible Biodegradable Polymer

2006 ◽  
Vol 18 (2) ◽  
pp. 165-169 ◽  
Author(s):  
C. J. Bettinger ◽  
E. J. Weinberg ◽  
K. M. Kulig ◽  
J. P. Vacanti ◽  
Y. Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Biodegradable Polymer ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds

scholarly journals Fabrication of scalable tissue engineering scaffolds with dual-pore microarchitecture by combining 3D printing and particle leaching

2016 ◽  
Vol 61 ◽  
pp. 180-189 ◽  
Author(s):  
Soumyaranjan Mohanty ◽  
Kuldeep Sanger ◽  
Arto Heiskanen ◽  
Jon Trifol ◽  
Peter Szabo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Tissue Engineering Scaffolds

Mineralized Nanofibers for Bone Tissue Engineering

2018 ◽  
pp. 461-475 ◽  
Author(s):  
Ozan Karaman
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Bone Grafts ◽  
Tissue Engineering Scaffolds ◽  
Promising Alternative ◽  
Biomimetic Scaffolds

The limitation of orthopedic fractures and large bone defects treatments has brought the focus on fabricating bone grafts that could enhance ostegenesis and vascularization in-vitro. Developing biomimetic materials such as mineralized nanofibers that can provide three-dimensional templates of the natural bone extracellular-matrix is one of the most promising alternative for bone regeneration. Understanding the interactions between the structure of the scaffolds and cells and therefore the control cellular pathways are critical for developing functional bone grafts. In order to enhance bone regeneration, the engineered scaffold needs to mimic the characteristics of composite bone ECM. This chapter reviews the fabrication of and fabrication techniques for fabricating biomimetic bone tissue engineering scaffolds. In addition, the chapter covers design criteria for developing the scaffolds and examples of enhanced osteogenic differentiation outcomes by fabricating biomimetic scaffolds.

Sign in / Sign up

Export Citation Format

Share Document