scholarly journals Recycled Mineral Raw Materials from Quarry Waste Using Hydrocyclones

Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2047 ◽  
Author(s):  
Menéndez-Aguado L.D. ◽  
Marina Sánchez M. ◽  
Rodríguez M.A. ◽  
Coello Velázquez A.L. ◽  
Menéndez-Aguado J.M.

Mining activities in general, and quarrying processes in particular, generate huge amounts of tailings with a considerable presence of fine particles and with a variable composition of minerals, which could limit the direct application of those wastes. Under the paradigm of a circular economy, more effort has to be made to find adequate applications for those secondary raw materials. In this study, a process was proposed and tests were performed to valorise fine particle product as a raw material for the building and construction industry. Samples were taken from wastes in several aggregate production plants, being characterized and processed to remove the clayey components to obtain the cleanest quartz fraction. Then, different characterization and validation tests were carried out to analyse the application of these products as raw materials in the building and construction industry (cement and ceramics). Results showed that with no complex technologies, the tailings can be considered as a mineral raw material in different applications.

2021 ◽  
pp. 34-40
Author(s):  
Guenter TIESS ◽  
Iryna SOKOLOVA ◽  
Serhii KLOCHKOV

The paper analyzes the changes in commodity market distortions, competing land use types, raw material demand for development, and rapid diffusion of key enabling technologies meeting the requirements of constant, dynamic development of major European industries. The author gives the relationship between the dynamics for mineral resources consumption growth, and changes in the conditions of production of these resources. Contains a critical review of methods for predicting the mineral resources dependency, including an estimated forecasting method based on guidelines for the evaluation of needs for natural resources and their substitutes.    One of the principles is comprehensive and integrated resource recovery. In a nutshell, this new approach argues that any operation should disturb a mine site only once and extract all useful materials using an optimised integrated flowsheet. This principle also requires that all by-products and residues are (re)used and that by-products and tailings at the end of life to be ‘future-proofed’, i.e. they should retain their ability to continue to be of value into the distant future where technology/economy may make feasible their use.    It is noted that access to and affordability of mineral raw materials are crucial for the sound functioning of the EU’s economy. A new 2020 list of critical mineral raw materials is presented and ways to compensate for the CRM deficit are described in detail.    Separately noted that the mineral policy is needed to be meticulously treated to facilitate company investment security, streamline permitting and access to minerals in a line with the European Green Deal, the Circular Economy Action Plan, the Bioeconomy Strategy and the European Industrial Strategy. Concerning, the latest steps towards Europe economically resilient by a framework for raw materials and the Circular Economy – creation of European Raw Materials Alliance recognized as particularly effective.    Global Industry Standard on Tailings Management represented as a robust, fit-for-purpose international standard for the safer management of tailings storage facilities.    The argument is given that since the land issue is one of the most delicate in a densely populated areas heavily dependent on agriculture, housing, infrastructure or other nonmineral development, a fair and equitable distribution of land is important for a mineral perspective.    There is also the need for strategic and open network between political, industrial and local communities through the exchange of information to enhance knowledge, experience and skills between stakeholders. Social acceptance of that idea is a fundamental element that must be addressed to develop a confl ict-free area for mineral development activities.    The conclusions indicate that we would like to emphasize that the main task of today is to create an effective system for monitoring the movement of raw materials along the entire added-value chain. The ability to quickly identify and respond to challenges in mineral policy will provide leadership in EU strategic technologies and industries. This process has already started with the creation of the European Raw Materials Alliance ERMA. State institutions, businesses, scientific institutions, and civil society in the close dialogue are able to ensure sustainable development and security of civilization as a whole. 


2021 ◽  
Vol 77 (4) ◽  
pp. 66-71
Author(s):  
S.I. Fedorkin ◽  
N.V. Lyubomirsky ◽  
E.A. Kogay ◽  
A.V. Dudinskaya

The article analyzes the raw material base of building materials of the Crimea and shows the ways of its expansion due to the production of wall materials based on secondary mineral raw materials and lime-fluff using the technology of forced carbonation of products.


2021 ◽  
Vol 5 (1) ◽  
pp. 37
Author(s):  
Konstantinos Oikonomou ◽  
Dimitris Damigos

Mineral raw materials prices have been shown to be affected by macroeconomic factors such as aggregate demand and commodity-specific factors (e.g., supply shocks). In addition, it has been shown that certain mineral raw material prices co-move, meaning that they behave similarly during expansion and contraction phases of the international business cycles. In order to assess the behavior similarity of the prices of different mineral raw materials, we propose a method that utilizes extracted features of time series price data and unsupervised learning techniques to create clusters of price movements having similar long-term behavior.


Proceedings ◽  
2018 ◽  
Vol 2 (20) ◽  
pp. 1313
Author(s):  
Angélica Lozano-Lunar ◽  
Auxi Barbudo ◽  
José María Fernández ◽  
José Ramón Jiménez

Among the actions proposed by the European Union for the implementation of Circular Economy is the use of waste as a secondary raw material (SRM). During the fusion of the scrap, a steel dust is generated, named Electric Arc Furnace Dust (EAFD). The EAFD is composed mainly of potentially leachable heavy metals, so is classified as “hazardous” waste. Around the world, approximately 70% of this waste is deposited in landfills, with a previous treatment through cement-based materials to prevent the metals’ mobility. However, this action is not in accordance with the Circular Economy concept due to the greater use of resources and the loss of deposited metals. The present investigation analyses the use of EAFD as SRM in conventional mortar production for its use as a construction material. Different substitution percentages (25%, 50% and 100%) were used replacing siliceous filler by EAFD. The investigation analysed the behaviour of conventional mortars by tests of workability, compressive strength, water absorption by capillarity and leaching behaviour in granular and monolithic state. The results obtained indicate a slight improvement in mechanical behaviour with the incorporation of EAFD, the reason why its use as SRM in conventional mortars would benefit the construction industry and would encourage the Circular Economy. From an environmental point of view, the mechanisms of Pb fixation should be improved in granular state.


2020 ◽  
Vol 8 ◽  
Author(s):  
Duygu Karabelli ◽  
Steffen Kiemel ◽  
Soumya Singh ◽  
Jan Koller ◽  
Simone Ehrenberger ◽  
...  

The growing number of Electric Vehicles poses a serious challenge at the end-of-life for battery manufacturers and recyclers. Manufacturers need access to strategic or critical materials for the production of a battery system. Recycling of end-of-life electric vehicle batteries may ensure a constant supply of critical materials, thereby closing the material cycle in the context of a circular economy. However, the resource-use per cell and thus its chemistry is constantly changing, due to supply disruption or sharply rising costs of certain raw materials along with higher performance expectations from electric vehicle-batteries. It is vital to further explore the nickel-rich cathodes, as they promise to overcome the resource and cost problems. With this study, we aim to analyze the expected development of dominant cell chemistries of Lithium-Ion Batteries until 2030, followed by an analysis of the raw materials availability. This is accomplished with the help of research studies and additional experts’ survey which defines the scenarios to estimate the battery chemistry evolution and the effect it has on a circular economy. In our results, we will discuss the annual demand for global e-mobility by 2030 and the impact of Nickel-Manganese-Cobalt based cathode chemistries on a sustainable economy. Estimations beyond 2030 are subject to high uncertainty due to the potential market penetration of innovative technologies that are currently under research (e.g. solid-state Lithium-Ion and/or sodium-based batteries).


Minerals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 523 ◽  
Author(s):  
Robben ◽  
Wotruba

While the deposit qualities for mineral raw materials are constantly decreasing, the challenges for sustainable raw material processing are increasing. This applies not only to the demand for minimizing the consumption of energy, water, and reagents, but also to the reduction of residual materials, especially fine and difficult-to-landfill materials. Sensor‐based ore sorting can be used as a separation process for coarser grain sizes before the application of fine comminution and separation technologies and is applicable for a large variety of mineral raw materials. Sensor‐based ore sorting applies at various points in the process flow diagram and is suitable for waste elimination, for material diversion into different process lines, for the production of pre‐ and final concentrates, as well as for the reprocessing of coarse‐grained waste dumps and other applications. The article gives an overview of the development and state of the art of sensor‐based ore sorting for mineral raw materials and introduces various applications.


2021 ◽  
Vol 21 (3) ◽  
pp. 43-62
Author(s):  
Monisha Ravi ◽  
Balasubramanian Murugesan ◽  
Arul Jeyakumar ◽  
Kiranmayi Raparthi

Abstract This research mainly concentrates on eco-friendly construction material. Production of cement and concrete industries release huge amount of carbon dioxide (CO2) and greenhouse gases which affect the environment and also there is a demand in construction material by man-made or nature. The construction sector finds an economic and eco-friendly cement replacement material to achieve the demand for green concrete that improve the energy conservation and better energy saving material. In marine Bio-refinery waste produce huge quantity of calcium carbonate, whose disposal is cause of major concern. Pre-eminent solution for this problem is utilizing the marine shell waste in cement and concrete. It revises the manufacturing process to reduce the raw material usage in production and adoptable material for global warming. Therefore, the researchers focus on marine waste sea shells as the replacement material in construction industry to save the energy and also give sustainable green material. As per the previous studies by the researchers to determine the chemical composition, specific gravity, water absorption, particle size distribution of seashells and also compressive, flexural and tensile strength of concrete. It shows the seashell is filler material that slightly increases the strength when compared to the conventional materials and therefore the sea shells are suitable for the construction field to manufacture the cement and concrete with eco-friendly manner.


Author(s):  
S. L. Rovin ◽  
L. E. Rovin ◽  
V. A. Jaranov

In the production of mineral raw materials in cupolas, as a by-product and harmful product, a significant amount of cast iron (up to 3 % of the raw material) is formed and, as a rule, thrown into the dumps. The article presents technical solutions that ensure the separation of mineral melt and cast iron. In addition, the article describes the results of optimizing the design of ladders used for draining liquid metal from the mineral wool cupola and transporting it. The resulting cast iron ingots can then be used as a charge in the smelting of branded cast alloys.


Author(s):  
Jakob Kløve Keiding ◽  
Per Kalvig ◽  
Claus Ditlefsen ◽  
Steen Lomholt ◽  
Peter Roll Jakobsen

Aggregates and other mineral raw materials are important prerequisites for the continual development of the infrastructure and economic growth of a country. Th e production of these raw materials in Denmark amounted to c. 4.5 m3 per capita in 2012, which was 57% higher than the average in EU and EFTA countries (UEPG 2014). In this perspective, it is essential to locate and assess the Danish mineral resources in order to plan future exploitation, especially in densely populated regions where both spatial competition for landuse and demands for raw materials are high. Here we present the methods used in a recent resource evaluation that for the fi rst time includes Danish resources both on land and at sea and summarises some of the main fi ndings of this analysis.


Author(s):  
Darkhan Aitzhanuly Baitileu ◽  
Maksim Nikolaevich Ankushev

The subject of this research is the copper deposits, copper-ore resource, and sources of alloying raw materials for mining and smelting production of the Paleometal Epoch in Central Kazakhstan, namely within the Kazakhstan mining and smelting region and Zhezkazgan-Ulytau mining and smelting center. The article provides the interim results of comprehensive research of geoarchaeological production facilities in the territory of copper deposits within the Zhezkazgan-Ulytau mining and smelting center, which allow determining the peculiarities of metallogenic complexes that used to be potential objects of the development of copper-ore reserves during the establishment of copper metallurgy, as well as making a predictive assessment of mineral raw materials potential of the region. The initial premise of this research lies in the authors' pursuit to integrate natural scientific methods of research into the field of humanities to the maximum effect via studying smelting slags and ore relics from the ancient settlements of the region for the purpose of reconstructing the mining and smelting process of the Bronze Age in Central Kazakhstan. The authors offer the variants of localization of the mineral raw materials complex of Zhezkazgan-Ulytau mining and smelting center within the Kazakhstan mining and smelting region. Based on examination of the ores and smelting slags of Bronze Age settlements in Central Kazakhstan, the authors believe that the main copper raw materials in the Zhezkazgan-Ulytau region were the oxidized malachite-azurite and rich sulfide ores, as well as the zones of secondary sulfide enrichment of copper sandstones of the Zhezkazgan ore region. The conducted research allow to get closer to establishing patterns of localization of various types of copper deposits and development of copper-ore resources for mining and smelting production of Zhezkazgan-Ulytau region during the Paleometal Epoch.


Sign in / Sign up

Export Citation Format

Share Document