scholarly journals Bending Flexibility of Moso Bamboo (Phyllostachys Edulis) with Functionally Graded Structure

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2007 ◽  
Author(s):  
Xin Wei ◽  
Haiying Zhou ◽  
Fuming Chen ◽  
Ge Wang
Keyword(s):  
Composite Structures ◽  
Volume Fraction ◽  
Critical Role ◽  
Bending Stiffness ◽  
Functionally Graded ◽  
Size Difference ◽  
Vascular Bundles ◽  
Phyllostachys Edulis ◽  
Fiber Volume ◽  
Sustainable Resources

As one of the most renewable and sustainable resources on Earth, bamboo with its high flexibility has been used in the fabrication of a wide variety of composite structures due to its properties. A bamboo-based winding composite (BWC) is an innovative bamboo product which has revolutionized pipe structures and their applications throughout China as well as improving their impact on the environment. However, as a natural functionally graded composite, the flexibility mechanism of bamboo has not yet been fully understood. Here, the bending stiffness method based on the cantilever beam principle was used to investigate the gradient and directional bending flexibility of bamboo (Phyllostachys edulis) slivers under different loading Types during elastic stages. Results showed that the graded distribution and gradient variation of cell size of the fibers embedded in the parenchyma cells along the thickness of the bamboo culm was mainly responsible for the exhibited gradient bending flexibility of bamboo slivers, whereas the shape and size difference of the vascular bundles from inner to outer layers played a critical role in directional bending flexibility. A validated rule of mixture was used to fit the bending stiffness under different loading Types as a function of fiber volume fraction. This work provides insights to the bionic preparation and optimization of high-performance BWC pipes.

Flexural behavior of functionally graded polymeric composite beams

2021 ◽  
pp. 152808372110003
Author(s):  
M Atta ◽  
A Abu-Sinna ◽  
S Mousa ◽  
HEM Sallam ◽  
AA Abd-Elhady
Keyword(s):  
Flexural Strength ◽  
Volume Fraction ◽  
Stress Gradient ◽  
Polymeric Composite ◽  
Composite Beams ◽  
Functionally Graded ◽  
Flexural Behavior ◽  
Bending Test ◽  
Polymeric Composite Material ◽  
Fiber Volume

The bending test is one of the most important tests that demonstrates the advantages of functional gradient (FGM) materials, thanks to the stress gradient across the specimen depth. In this research, the flexural response of functionally graded polymeric composite material (FGM) is investigated both experimentally and numerically. Fabricated by a hand lay-up manufacturing technique, the unidirectional glass fiber reinforced epoxy composite composed of ten layers is used in the present investigation. A 3-D finite element simulation is used to predict the flexural strength based on Hashin’s failure criterion. To produce ten layers of FGM beams with different patterns, the fiber volume fraction ( Vf%) ranges from 10% to 50%. A comparison between FGM beams and conventional composite beams having the same average Vf% is made. The experimental results show that the failure of the FGM beams under three points bending loading (3PB) test is initiated from the tensioned layers, and spread to the upper layer. The spreading is followed by delamination accompanied by shear failures. Finally, the FGM beams fail due to crushing in the compression zone. Furthermore, the delamination failure between the layers has a major effect on the rapidity of the final failure of the FGM beams. The present numerical results show that the gradient pattern of FGM beams is a critical parameter for improving their flexural behavior. Otherwise, Vf% of the outer layers of the FGM beams, i.e. Vf% = 30, 40, or 50%, is responsible for improving their flexural strength.

Biomimetic composites inspired by venous leaf

2017 ◽  
Vol 52 (3) ◽  
pp. 361-372 ◽  
Author(s):  
Gongdai Liu ◽  
R Ghosh ◽  
A Vaziri ◽  
A Hossieni ◽  
D Mousanezhad ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Yield Stress ◽  
Poisson’S Ratio ◽  
Composite Structures ◽  
Volume Fraction ◽  
Matrix Material ◽  
Poisson's Ratio ◽  
Fiber Volume ◽  
Young’S Moduli

A typical plant leaf can be idealized as a composite having three principal fibers: the central mid-fiber corresponding to the mid-rib, straight parallel secondary fibers attached to the mid-fiber representing the secondary veins, and then another set of parallel fibers emanating from the secondary fibers mimicking the tertiary fibers embedded in a matrix material. This paper introduces a biomimetic composite design inspired by the morphology of venous leafs and investigates the effects of venation morphologies on the in-plane mechanical properties of the biomimetic composites using finite element method. The mechanical properties such as Young’s moduli, Poisson’s ratio, and yield stress under uniaxial loading of the resultant composite structures was studied and the effect of different fiber architectures on these properties was investigated. To this end, two broad types of architectures were used both having similar central main fiber but differing in either having only secondary fibers or additional tertiary fibers. The fiber and matrix volume fractions were kept constant and a comparative parametric study was carried out by varying the inclination of the secondary fibers. The results show that the elastic modulus of composite in the direction of main fiber increases linearly with increasing the angle of the secondary fibers. Furthermore, the elastic modulus is enhanced if the secondary fibers are closed, which mimics composites with closed cellular fibers. In contrast, the elastic modulus of composites normal to the main fiber ( x direction) exponentially decreases with the increase of the angle of the secondary fibers and it is little affected by having secondary fibers closed. Similar results were obtained for the yield stress of the composites. The results also indicate that Poisson’s ratio linearly increases with the secondary fiber angle. The results also show that for a constant fiber volume fraction, addition of various tertiary fibers may not significantly enhance the mechanical properties of the composites. The mechanical properties of the composites are mainly dominated by the secondary fibers. Finally, a simple model was proposed to predict these behaviors.

Resin Infusion of Triaxially Braided Preforms With Through-the-Thickness Reinforcement

2001 ◽  
Author(s):  
Jay R. Sayre ◽  
Alfred C. Loos
Keyword(s):  
Composite Structures ◽  
High Performance ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Element Model ◽  
Manufacturing Cost ◽  
Fiber Volume ◽  
Resin Infusion ◽  
Infiltration Process ◽  
High Fiber

Abstract Vacuum assisted resin transfer molding (VARTM) has shown potential to significantly reduce the manufacturing cost of high-performance aerospace composite structures. In this investigation, high fiber volume fraction, triaxially braided preforms with through-the-thickness stitching were successfully resin infiltrated by the VARTM process. The preforms, resin infiltrated with three different resin systems, produced cured composites that were fully wet-out and void free. A three-dimensional finite element model was used to simulation resin infusion into the preforms. The predicted flow patterns agreed well with the flow pattern observed during the infiltration process. The total infiltration times calculated using the model compared well with the measured times.

scholarly journals Efficiently, accurately, intelligently dissecting bamboo: characteristic of vascular bundle in Phyllostachys

2021 ◽  
Author(s):  
Haocheng Xu ◽  
Ying Zhang ◽  
Jiajun Wang ◽  
Tuhua Zhong ◽  
Xinxin Ma ◽  
...  
Keyword(s):  
Cross Section ◽  
Radial Distribution ◽  
Vascular Bundle ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Width Ratio ◽  
Vascular Bundles ◽  
Fiber Volume ◽  
Detection Model ◽  
Gradient Change

AbstractA comprehensive understanding of vascular bundles is the key to elucidate the excellent intrinsic mechanical properties of bamboo. This research aims to investigate the gradient distribution of fiber volume fraction and the gradient changes in the shape of vascular bundles along the radial axis in Phyllostachys. We constructed a universal transfer-learning-based vascular bundle detection model with high precision of up to 96.97%, which can help to acquire the characteristics of vascular bundles quickly and accurately. The total number of vascular bundles, total fiber sheath area, the length, width and area of fiber sheath of individual vascular bundles within the entire cross-section were counted, and the results showed that these parameters had a strongly positive linear correlation with the outer circumference and wall thickness of bamboo culms, but the fiber volume fraction (around 25.5 %) and the length-to-width ratio of the vascular bundles (around 1.226) were relatively constant. Furthermore, we layered the cross section of bamboo according to the wall thickness finely and counted the characteristics of vascular bundle in each layer. The results showed that the radial distribution of fiber volume fraction decreased exponentially, the radial distribution of the length-to-width ratio of vascular bundle decreased quadratically, the radial distribution of the width of vascular bundle increased linearly. The trends of the gradient change in vascular bundle’s characteristics were found highly consistent among 29 bamboo species in Phyllostachys.One sentence summaryA universal vascular bundle detection model can efficiently dissect vascular bundles in Phyllostachys, and the radial gradient change of vascular bundles in cross-section are found highly consistent.

scholarly journals Formation of Resin-Rich Zones in Composites Processing

2010 ◽  
Vol 123-125 ◽  
pp. 543-546 ◽  
Author(s):  
Chen Song Dong ◽  
Tze Chiun Tsai
Keyword(s):  
Composite Structures ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Liquid Composite Molding ◽  
Fiber Volume ◽  
Factors Affecting ◽  
Composite Molding ◽  
Composites Processing ◽  
Stress And Deformation ◽  
Fiber Preforms

Resin-rich zones are a common phenomenon in liquid composite molding processes. These resin-rich zones cause unwanted residual stress and deformation, and part-to-part variation, and thus they need to be studied in the design of composite structures. An experimental study on the formation of resin-rich zones in angled composite parts is presented in this paper. Two open-channel mold sets were designed and fabricated. Fiber preforms were loaded into these molds and the gaps formed were visually inspected by a microscope. The influences of corner radius, fiber volume fraction, enclosed angle, and stacking sequence were investigated, and significant factors affecting gap thickness were identified by Design of Experiments (DOE). It can be concluded from the experimental results that: 1) Fiber volume fraction is the most significant factor affecting gap thickness. Gap thickness is inversely proportional to fiber volume fraction; 2) Gap thickness is inversely proportional to radius; 3) The gap thickness of unidirectional preforms is larger than that of the cross-ply preforms.

Dynamic Optimization of Functionally Graded Thin-Walled Box Beams

2017 ◽  
Vol 17 (09) ◽  
pp. 1750109 ◽  
Author(s):  
Karam Y. Maalawi
Keyword(s):  
Fiber Volume Fraction ◽  
Natural Frequencies ◽  
Volume Fraction ◽  
Functionally Graded ◽  
Fiber Volume ◽  
Structural Dynamic ◽  
Design Variables ◽  
Target Values ◽  
Box Beams ◽  
Thin Walled

This paper introduces a mathematical model for optimizing the dynamic performance of thin-walled functionally graded box beams with closed cross-sections. The objective function is to maximize the natural frequencies and place them at their target values to avoid the occurrence of large amplitudes of vibration. The variables considered include fiber volume fraction, fiber orientation angle and ply thickness distributions. Various power-law expressions describing the distribution of the fiber volume fraction have been implemented, where the power exponent was taken as the main optimization variable. The mass of the beam is kept equal to that of a known reference beam. Side constraints are also imposed on the design variables in order to avoid having unacceptable optimal solutions. The mathematical formulation is carried out in dimensionless quantities, enabling the generalization to include models with different cross-sectional types and beam configurations. The optimization problem is solved by invoking the MatLab optimization ToolBox routines, along with structural dynamic analysis and eigenvalue calculation routines. A case study on the optimization of a cantilevered, single-cell spar beam made of carbon/epoxy composite is considered. The results for the basic case of uncoupled bending motion are given. Conspicuous design charts are developed, showing the optimum design trends for the mathematical models implemented in the study. It is concluded that the natural frequencies, even though expressed in implicit functions, are well-behaved, monotonic and can be treated as explicit functions in the design variables. Finally, the developed models can be suitably used in the global optimization of typical composite, functionally graded, thin-walled beam structures.

RATE-DEPENDENT COMPACTION AND RELAXATION RESPONSE OF UNCURED PREPREGS UNDER HIGH-PRESSURE CONDITIONS

2021 ◽  
Author(s):  
NOORA ALAHMED ◽  
KAMRAN KHAN ◽  
REHAN UMER
Keyword(s):  
Stress Relaxation ◽  
Composite Structures ◽  
Volume Fraction ◽  
Permanent Deformation ◽  
Applied Pressure ◽  
Displacement Rate ◽  
Relaxation Response ◽  
Void Content ◽  
Fiber Volume ◽  
Rate Dependent

The compaction-relaxation response at different compaction rates and fiber volume fractions plays a key role in understanding the viscoelastic response of uncured prepregs. Hence, this study characterizes the time-dependent behavior of un-cured 4- layer prepregs subjected to compaction-stress relaxation test at different displacement rates i.e., 0.1 mm/min, 1.0 mm/min, and 10 mm/min, at 0.65 fiber volume fraction and allowed to relax for two hours. In this study, the complete deformation history of the Hexply M26T multilayer prepregs is measured from a stress-free state to the cured state. The effects of rate-dependent compaction-relaxation at different rates on percentages of compaction, recovery, stress change during relaxation, and permanent deformation of prepregs are computed. It was concluded that the 0.1   /    displacement rate showed the lowest peak stress level and the lowest stress relaxation and permanent deformation. A viscoelastic model was used to fit the experimental data and the results showed a good agreement. The void content was determined analytically and from the XCT-aided geometrical model. It was observed that for a given test condition, the void content increases as the displacement rate increases, due to the high applied pressure. This study highlights the importance of rate-dependent compaction-relaxation behavior and the need to determine the suitable process parameters and models to manufacture high-quality aerospace composite structures.

Thermal conductivity of biomimetic leaf composite

2017 ◽  
Vol 52 (13) ◽  
pp. 1737-1746 ◽  
Author(s):  
G Liu ◽  
R Ghosh ◽  
D Mousanezhad ◽  
A Vaziri ◽  
H Nayeb-Hashemi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Composite Structures ◽  
Volume Fraction ◽  
Cell Structure ◽  
Matrix Material ◽  
Mechanical And Thermal Properties ◽  
Ceramic Fibers ◽  
Fiber Morphology ◽  
Fiber Volume

The venous morphology of a typical plant leaf affects its mechanical and thermal properties. Such a material could be considered as a fiber reinforced composite structure where the veins and the rest of the leaf are considered as two materials having highly contrast mechanical and thermal properties. The variegated venations found in nature is idealized into three principal fibers—the central mid-fiber corresponding to the mid-rib, straight parallel secondary fibers attached to the mid-fiber representing the secondary veins, and then another set of parallel fibers emanating from the secondary fibers mimicking the tertiary veins of a typical leaf. This paper addresses the in-plane thermal conductivity of such a composite by considering such a venous fiber morphology embedded in a matrix material. We have considered two cases, fibers having either higher or lower conductivity respect to the matrix. The tertiary fibers do not interconnect the secondary fibers in our present study. We carry out finite element based computational investigation of the thermal conductivity of these composites under uniaxial thermal gradients and study the effect of different fiber architectures. To this end, we use two broad types of architectures both having similar central main fiber but differing in either having only secondary fibers or additional tertiary fibers. The fiber and matrix volume fractions are kept constant and a comparative parametric study is carried out by varying the inclination of the secondary fibers. We find the heat conductivity in the direction of the main fiber (Y direction) increases significantly as the fiber angle of the secondary increases. Furthermore, for composite with metal fibers, the conductivity in the Y direction is further enhanced when composite is manufactured by having secondary fibers forming a closed cell structure. However, for composite with ceramic fibers, the conductivity of the composite in the Y direction is little affected by having secondary fibers closed. An opposite behavior is observed when considering conductivity of the composite in the X direction. The conductivity of the composite in the X direction is reduced with increase in the angle of the secondary fibers. Higher conductivity in the X direction is achieved for composite with no closed cells for composites with metal fibers. The results also indicate that for composites with the constant fiber volume fraction, morphology of tertiary fibers may not significantly alter material conductivities. In conclusion, introducing a leaf-mimicking topology in fiber architecture can provide significant additional degrees of tunability in design of these composite structures.

Sign in / Sign up

Export Citation Format

Share Document