scholarly journals Synthesis of Calcium Aluminates from Non-Saline Aluminum Dross

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1837 ◽  
Author(s):  
Félix Antonio López ◽  
María Isabel Martín ◽  
Francisco José Alguacil ◽  
Mario Sergio Ramírez ◽  
José Ramón González
Keyword(s):  
Electron Microscopy ◽  
Milling Time ◽  
Molar Ratio ◽  
Mass Ratio ◽  
X Ray Diffraction ◽  
Reactive Milling ◽  
Tricalcium Aluminate ◽  
Transmission Electron ◽  
Calcium Aluminates ◽  
Relationship Of

The present work examines the synthesis of tricalcium aluminate (for use as a synthetic slag) from the non-saline dross produced in the manufacture of metallic aluminum in holding furnaces. Three types of input drosses were used with Al2O3 contents ranging from 58 to 82 wt %. Calcium aluminates were formed via the mechanical activation (reactive milling) of different mixtures of dross and calcium carbonate, sintering at 1300 °C. The variables affecting the process, especially the milling time and the Al2O3/CaO molar ratio, were studied. The final products were examined via X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. The reactive milling time used was 5 h in a ball mill, for a ball/dross mass ratio of 6.5. For a molar relationship of 1:3 (Al2O3/CaO), sintered products with calcium aluminate contents of over 90% were obtained, in which tricalcium aluminate (C3A) was the majority compound (87%), followed by C12A7 (5%).

On the Mechanical Milling of the AlCuFe Icosahedral Phase with Water

2014 ◽  
Vol 793 ◽  
pp. 23-27
Author(s):  
C. Patiño-Carachure ◽  
J. Luis López-Miranda ◽  
F. de la Rosa ◽  
M. Abatal ◽  
R. Pérez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Milling Time ◽  
Induction Furnace ◽  
Icosahedral Phase ◽  
Quasicrystalline Phase ◽  
X Ray Diffraction ◽  
Cast Sample ◽  
X Ray ◽  
Transmission Electron ◽  
Icosahedral Quasicrystalline

In this investigation the Al64Cu24Fe12 alloy was melted in an induction furnace and solidified under normal casting conditions. The as-cast sample was subject to a heat treatment at 700 oC under argon atmosphere in order to obtain the icosahedral quasicrystalline phase in a monophase region. Subsequently, the icosahedral phase was milled for different times and water added conditions. The pre-alloyed and milled powders were characterized using scanning electron microscopy, X-Ray diffraction, and transmission electron microscopy. The experimental results showed that the icosahedral phase is sensitive to the reaction between water and aluminum of the quasicrystalline alloy to generate hydrogen. As the milling time and the amount of water are increased, the embrittlement reaction of the alloy is accentuated releasing more hydrogen.

scholarly journals ZnO/ZnAl2O4 Nanocomposite with 3D Sphere-Like Hierarchical Structure for Photocatalytic Reduction of Aqueous Cr(VI)

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1624 ◽  
Author(s):  
Xiaoya Yuan ◽  
Xin Cheng ◽  
Qiuye Jing ◽  
Jiawei Niu ◽  
Dong Peng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Uv Light ◽  
Hydrothermal Process ◽  
Three Dimensional ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Excellent Photocatalytic Activity ◽  
Potential Applications

Three dimensional (3D) ZnO/ZnAl2O4 nanocomposites (ZnnAl-MMO) were synthesized by a simple urea-assisted hydrothermal process and subsequent high-temperature calcination. The as-prepared samples and their precursors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), and Photoluminescence spectra (PL). It was observed that the morphology of ZnnAl-MMO nanocomposites could be tuned from cubic aggregates, hierarchically flower-like spheres to porous microspheres by simply changing the molar ratio of metal cations of the starting reaction mixtures. The photocatalytic performance of ZnO/ZnAl2O4 nanocomposites in the photoreduction of aqueous Cr(VI) indicated that the as-prepared 3D hierarchical sphere-like ZnnAl-MMO nanocomposite showed excellent photocatalytic activity of Cr(VI) reduction under UV light irradiation. The results indicated that the maximum removal percentage of aqueous Cr(VI) was 98% within four hours at 10 mg/L initial concentration of Cr(VI), owing to the effective charge separation and diversion of photogenerated carriers across the heterojunction interface of the composite. Our study put forward a facile method to fabricate hierarchical ZnO/ZnAl2O4 composites with potential applications for wastewater treatment.

Solid State Amorphization of Ti60Si40 Alloy via Mechanical Alloying

2021 ◽  
Vol 876 ◽  
pp. 7-12
Author(s):  
Petr Urban ◽  
Fátima Ternero Fernández ◽  
Rosa M. Aranda Louvier ◽  
Raquel Astacio López ◽  
Jesus Cintas Físico
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Mechanical Alloying ◽  
Amorphous Phase ◽  
Milling Time ◽  
X Ray Diffraction ◽  
Mechanically Alloyed ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Heating Up

The effect of milling time on the microstructure evolution and formation of amorphous phase of Ti60Si40 alloy produced by mechanical alloying (MA) has been investigated. Laser diffraction, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and Differential Scanning Calorimetry (DSC) were employed to characterize the particle size, morphology and structure of mechanically alloyed Ti60Si40. When the milling time is increased to 20 h, the particle size decreases from 23.7 to 4.7 μm, the shape of the particles changes to spherical and the crystalline structure is transformed into an amorphous phase. The amorphous Ti60Si40 alloy is stable when heating up to 750oC. Above this temperature, the cold crystallization of the intermetallic compounds Ti5Si3 and/or Ti5Si4 begins.

Non-crystalline hydrous feldspathoids in Late Permian carbonate rock

Clay Minerals ◽  
1991 ◽  
Vol 26 (4) ◽  
pp. 527-534 ◽  
Author(s):  
C. Bender Koch
Keyword(s):  
Electron Microscopy ◽  
Carbonate Rock ◽  
Crystalline Material ◽  
Molar Ratio ◽  
Late Permian ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selective Area ◽  
Transmission Electron ◽  
Oolitic Shoal

AbstractThe EDTA-insoluble residues from five samples (two from the oolitic shoal facies and three from the lagoonal facies) of the Late Permian Ca-2 unit (Zechstein) have been investigated by X-ray diffraction, infrared spectroscopy, and scanning and transmission electron microscopy with energy dispersive X-ray analysis (EDXA). The results show that spheres of non-crystalline hydrous feldspathoids (with Al/Si molar ratio between 1·5 and 2·2) dominate the residues of samples from the oolitic shoal facies. Samples from the lagoonal facies are dominated by crystalline material (muscovite and quartz), but two of the samples contain a small number of spheres. Analyses of these samples by selective area diffraction and EDXA revealed the presence of small amounts of non-crystalline hydrous feldspathoids with Al/Si molar ratio between 0·1 and 1·9.

scholarly journals Oxalic Acid-Assisted Hydrothermal Synthesis and Luminescent of Hexagonal NaYF4:Ln3+ (Ln = Sm, Eu, Yb/Er) Micro/Nanoplates

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Feng Tao ◽  
Zhishun Shen ◽  
Zhijun Wang ◽  
Da Shu ◽  
Qi Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Oxalic Acid ◽  
Molar Ratio ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Display Systems

Hexagonal NaYF4:Ln3+ micro/nanoplates were successfully synthesized via a hydrothermal method using oxalic acid as a shape modifier. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) have been used to study the morphologies and crystal structure of the products. The effects of the pH values and the molar ratio of oxalic acid to NaOH on the crystal growth have been investigated in detail. The time-dependent experiments have been conducted to investigate the morphology evolution process, and based on the results, a possible growth mechanism was proposed. The photoluminescence properties of 5 mol% Eu3+ and 3 mol% Sm3+ doped NaYF4 and 20 mol% Yb3+/2 mol% Er3+ codoped NaYF4 micro/nanoplates were investigated. The experimental results showed that NaYF4:Ln3+ micro/nanoplates have excellent luminescence and can be potential application in the field of light display systems, lasers, and optoelectronic devices.

Synthesis and Evaluations of Microstructure Properties on Al-(50, 60, 70 mass%)Si Systems by Mechanical Alloying

2004 ◽  
Vol 449-452 ◽  
pp. 249-252 ◽  
Author(s):  
Jung Il Lee ◽  
Tae Whan Hong ◽  
Il Ho Kim ◽  
Soon Chul Ur ◽  
Young Geun Lee ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Alloying ◽  
Milling Time ◽  
Alloy System ◽  
Misfit Strain ◽  
X Ray Diffraction ◽  
Mechanically Alloyed ◽  
X Ray ◽  
Transmission Electron ◽  
Nanocrystalline Structures

High silicon Al-Si alloy powders having nanocrystalline structures have been produced by mechanical alloying process. Microstructures in mechanically alloyed Al-Si powders were investigated by scanning electron microscopy and transmission electron microscopy. X-ray diffraction analyses were also carried out to characterize lattice constant, crystallite size and misfit strain. Effective milling time for the formation of nanocrystalline microstructure was thought to be approximately 12 hours, and the sizes of Al and Si crystallites in mechanically alloyed powders after longer than 12 hours of milling were reduced to about 30nm and 70nm respectively, in Al-70 mass% Si alloy system. The misfit strains increased with milling time up to 240 hours, and saturated to 5.73×10-3 and 4.39×10-3 for Al and Si crystallites, respectively.

Convenient Route to Cu-Ag Bimetallic Nanoleaflets with High Content of Cu and their Electrochemical Properties

2017 ◽  
Vol 727 ◽  
pp. 395-402
Author(s):  
Zi Run Wang ◽  
Xin Liu ◽  
Gui Qi Xie ◽  
Yi Wu ◽  
Ming Nie ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Reduction Method ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Phase Reduction ◽  
Transmission Electron ◽  
Convenient Route

Cu-Ag alloy nanoparticles were synthesized by a liquid phase reduction method. Using sodium formaldehyde sulfoxylate (SFS) as reducing agents, copper-silver bimetallic nanoleaflets with high content of Cu were prepared. The obtained Cu-Ag bimetallic nanocrystal were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscope (FESEM), high resolution transmission electron microscopy (HRTEM) and transmission electron microscopy (TEM). Different molar ratio of Cu-Ag bimetallic nanomaterials could produce different morphologies. The surfactant β-CD plays a crucial role on the structure of the products. The different molar ratios of Cu-Ag were also investigated. The electrochemical activity was evaluated using cyclic voltammetry (CV), electrochemical hydrogen evolution reaction (HER) in a 0.5M Na2SO4 electrolyte.

Effects of Milling Variables in Amorphous Phase Formation of Fe78Si9B13 Alloy Produced by Mechanical Alloying

2021 ◽  
Vol 876 ◽  
pp. 19-24
Author(s):  
Raquel Astacio López ◽  
Rosa M. Aranda Louvier ◽  
Petr Urban ◽  
Fátima Ternero Fernández ◽  
Juan Manuel Montes Martos
Keyword(s):  
Electron Microscopy ◽  
Mechanical Alloying ◽  
Amorphous Phase ◽  
Milling Time ◽  
Morphological Evolution ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Nanocrystalline And Amorphous ◽  
Gas Atmosphere ◽  
Amorphous Phase Formation

In this study, amorphous Fe78Si9B13 alloy was successfully synthesized by mechanical alloying (MA) of pure elemental powders which were milled under an argon gas atmosphere. Effects of milling time on the phase transformation, microstructure and morphological evolution were studied by X-ray diffraction (XRD), laser diffraction (Granulometry), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results showed that by increasing the milling time, the nanocrystalline and amorphous phase content increases and alloys with good properties are obtained at 100 h of milling.

Evaluations of Microstructure and Hydrogenation Properties on Mg2NiHx Hydrogen Absorbing Alloys by Hydrogen Induced Mechanical Alloying

2007 ◽  
Vol 544-545 ◽  
pp. 311-314 ◽  
Author(s):  
Whan Gi Kim ◽  
Soon Chul Ur ◽  
Y.G. Lee ◽  
Young Jig Kim ◽  
Tae Whan Hong
Keyword(s):  
Electron Microscopy ◽  
Mechanical Alloying ◽  
High Efficiency ◽  
Misfit Strain ◽  
Mass Ratio ◽  
Hydrogen Storage Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Pressure Hydrogen

In order to fabricate high efficiency, light-weight hydrogen storage materials in an economical way, we have been made to propose a new mechanical alloying process by high-pressure hydrogen induced planetary ball milling(HIMA) using Mg and Ni chips. Microstructural evaluations of the Mg-Ni-H systems synthesized were investigated by scanning electron microscopy and the transmission electron microscopy. X-ray diffraction analysis was also made to characterize the lattice constant, crystallite size and misfit strain. The hydrogenation properties of the particles synthesized were evaluated by automatic PCI (pressure-composition-isotherm). Adopting 66:1 BCR (ball to chips mass ratio) for HIMA process, fully hydrogenated alloys were obtained after 96 hrs of milling, resulting in total hydrogen content of 2.25 mass%.

Sign in / Sign up

Export Citation Format

Share Document