scholarly journals Porosity Distribution in Apically Perforated Curved Root Canals Filled with Two Different Calcium Silicate Based Materials and Techniques: A Micro-Computed Tomography Study

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1729 ◽  
Author(s):  
Saulius Drukteinis ◽  
Vytaute Peciuliene ◽  
Hagay Shemesh ◽  
Paulius Tusas ◽  
Ruta Bendinskaite

The present study evaluated the porosity distribution of BioRoot RCS/single gutta-percha point (BR/SC) and MTA flow (MF) fillings, which were used as plugs for the apical perforation repair in curved canals of extracted mandibular molars using micro-computed tomography (μCT). Forty mesial root canals of mandibular first molars were shaped with ProTaper NEXT X1–X5 files 2 mm beyond the apex to simulate apical perforations that were randomly divided into two groups (n = 20) according to the material and technique used for the apical plug: BR/SC or MF. The specimens were scanned before and after canal filling at an isotropic resolution of 9.9 μm. The volumetric analysis of voids in the apical 5 mm of the fillings was performed. Data were analyzed using one-way ANOVA with Bonferroni correction (p < 0.05). Micro-computed tomography (µCT) evaluation revealed significant differences between the groups in terms of porosity: the total volume and percentage volume of voids was lower in the BR/SC group in comparison with the MF group (p < 0.05), with the predominance of open pores in both groups. Neither of the materials and/or application techniques were able to produce void-free root fillings in the apical region of artificially perforated curved roots of mandibular molars.

2020 ◽  
Vol 9 (4) ◽  
pp. 1164 ◽  
Author(s):  
Vicente Faus-Matoses ◽  
Cristina Pasarín-Linares ◽  
Ignacio Faus-Matoses ◽  
Federico Foschi ◽  
Salvatore Sauro ◽  
...  

Background: The objective was to evaluate the efficiency of ProTaper Gold (PTG) and Reciproc Blue (RB) NiTi files in obturation material removal from straight root canals assessed by micro-computed tomography. Methods: Fifty-two anterior human teeth were shaped with a PTG rotary system until F2 (25/.08). Specimens were obturated with a continuous wave of condensation technique. For retreatment, specimens were randomly distributed in two experimental groups: PTG group (F4 file) and RB (R40 file). Micro-CT scans were performed before and after retreatment procedures. The percentage of the remaining obturation material compared to the original volume was calculated, as well as the retreatment time. The presence of separated files was recorded. A descriptive analysis was carried out, and nonparametric tests were employed. Results: The mean percentages of remaining obturation material in the PTG group and the RB group were 4.14 ± 4.30% and 4.18 ± 4.29%, respectively. The mean retreatment times for the PTG and RB groups were 144 ± 51 and 163 ± 88 s, respectively. There were no statistically significant differences, neither in removal efficiency (p > 0.05) nor in retreatment time (p > 0.05), between the two groups. The coronal and middle thirds presented significantly more remaining obturation material than the apical third (p < 0.05). No file separation occurred. Conclusions: ProTaper Gold and Reciproc Blue present with comparable efficiency in removing the obturation material, with a similar mean retreatment time.


2021 ◽  
Vol 10 (21) ◽  
pp. 4977
Author(s):  
Saulius Drukteinis ◽  
Goda Bilvinaite ◽  
Hagay Shemesh ◽  
Paulius Tusas ◽  
Vytaute Peciuliene

The present study evaluated the effect of ultrasonic agitation on the porosity distribution of BioRoot RCS/single gutta-percha cone (BR/SC) and MTA Flow (MF) root canals fillings used as apical plugs in moderately curved and apically perforated roots. Eighty mesial root canals of mandibular first molars were enlarged up to ProTaper NEXT X5 rotary instrument 2 mm beyond the apical foramen, simulating apical perforations. Specimens were randomly divided into four experimental groups (20 canals per group) according to the material and technique used for root canal obturation: BR/SC, BR/SC with ultrasonic agitation (BR/SC-UA), MF and MF with ultrasonic agitation (MF-UA). The ultrasonic tip was passively inserted into the root canal after the injection of flowable cement and activated for 10 s. The specimens were scanned before and after obturation with a high-resolution micro-computed tomography scanner, and the porosity of the apical plugs was assessed. The differences between groups were analyzed using the Kruskal-Wallis and Mann-Whitney tests, with the significance level set at 5%. None of the obturation materials and techniques used in this study was able to provide a pore-free root canal filling in the apical 5 mm. Considerably higher percentages of open and closed pores were observed in the MF and MF-UA groups, with the highest porosity being in the MF-UA group (p < 0.05). No significant differences were observed between the BR/SC and BR/SC-UA groups, where the quantity of open and closed pores remained similar (p > 0.05).


2011 ◽  
Vol 37 (12) ◽  
pp. 1682-1686 ◽  
Author(s):  
Marcelo Haas Villas-Bôas ◽  
Norberti Bernardineli ◽  
Bruno Cavalini Cavenago ◽  
Marina Marciano ◽  
Aldo del Carpio-Perochena ◽  
...  

2019 ◽  
Vol 25 ◽  
pp. 6351-6358
Author(s):  
Gabrielė Česaitienė ◽  
Tadas Venskutonis ◽  
Vita Mačiulskienė ◽  
Vaidotas Cicėnas ◽  
Vykintas Samaitis ◽  
...  

2021 ◽  
pp. 51-61
Author(s):  
A. Yu. Vasil'ev ◽  
V. V. Petrovskaya ◽  
E. A. Nichipor ◽  
V. G. Alpatova ◽  
N. N. Potrakhov ◽  
...  

During the course of this experimental study tomograms of extracted teeth were analyzed before and after filling the root canals with an endodontic material and fragments of broken metal instruments for root canal treatment. During the first stage of the experiment, untreated extracted teeth were scanned using conebeam computed tomography and microfocus cone-beam computed tomography. A comparative assessment of capabilities of the two methods of cone-beam computed tomography based on examination of untreated root canals was carried out. The second part of the study is dedicated to visualization of root canals that contain foreign high-density materials.


2021 ◽  
Vol 6 (2) ◽  
pp. 101-105
Author(s):  
Kadam Krutika Kiran ◽  
Vagarali Hemant ◽  
Pujar Madhu A ◽  
Tamase Aishwarya S ◽  
Sahana Umesh

This study aimed to compare the canal transportation and canal centering ability in the preparation of curved root canals after instrumentation with TruNatomy (TN) (TN; Dentsply Sirona, Maillefer, Ballaigues, Switzerland) and ProTaper Gold (PG) (PG; Dentsply, Tulsa Dental Specialties, Tulsa, OK, USA) files using cone‑beam computed tomography (CBCT). 30 Single rooted extracted human teeth with root curvature ranging from 20-30° according to Schneider’s method were selected. Teeth with any visible cracks or fractures, calcifications, previous root canal treatments were excluded. The teeth were randomly assigned into two groups i.e. Group 1-TN and Group 2-PG (n = 15 each). The teeth were instrumented according to manufacturer’s guidelines for both the groups. Canals were scanned using a CBCT scanner before and after preparation to evaluate the transportation and centering ratio at 3 mm, 5 mm, and 7 mm from the apex. The data analysis was done using SPSS software and the test used was independent sample t test for comparison between the 2 groups.Data obtained suggested that TN group presented lesser canal transportation at the middle third of the root. The PG group showed better centering abitily at apical third of the root canal when both the groups were compared. TN resulted in less transportation than PG at the middle third, and PG showed better centering ability at the apical third. Overall, both systems safely prepared root canals, causing minimal errors.


Sign in / Sign up

Export Citation Format

Share Document