scholarly journals Studies on Pitting Corrosion of Al-Cu-Li Alloys Part I: Effect of Li Addition by Microstructural, Electrochemical, In-situ, and Pit Depth Analysis

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1600 ◽  
Author(s):  
Xiaowei Lei ◽  
Alireza Saatchi ◽  
Elmira Ghanbari ◽  
Runze Dang ◽  
Wenzhe Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aluminum Alloys ◽  
Pitting Corrosion ◽  
Development Stage ◽  
Electrochemical Analysis ◽  
Lithium Content ◽  
In Situ Observation ◽  
Depth Analysis ◽  
Stage Stage

To analyze the effect of lithium and microstructure on the pitting corrosion behavior of aluminum alloys, three types of aluminum alloys were studied via scanning electron microscopy, transmission electron microscopy, electrochemical polarization, and by immersion tests coupled with in-situ observation of pitting and statistical analysis of pit depths measured by surface profilometry. It was found that, with increasing lithium content, the resistance to pitting corrosion was enhanced and the passive range was enlarged. In-situ observation revealed that the development of pitting corrosion exhibited three stages, including an initial slow nucleation stage (Stage I), a fast development stage (Stage II), and a stabilized growth stage (Stage III). Higher lithium content contributed to shorter time periods of Stages I and II, resulting in faster pitting evolution and a higher number of pits. However, the pits were generally shallower for the specimen with the highest lithium content, which is in agreement with the results of the electrochemical analysis.

scholarly journals Electron Microscopy Investigation of Magnetization Process in Thin Foils and Nanostructures

2007 ◽  
Vol 1026 ◽  
Author(s):  
Pascale Bayle-Guillemaud ◽  
Aurelien Masseboeuf ◽  
Fabien Cheynis ◽  
Jean-Christophe Toussaint ◽  
Olivier Fruchart ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Anisotropy ◽  
Magnetic Induction ◽  
Perpendicular Magnetic Anisotropy ◽  
In Situ Observation ◽  
Magnetic Imaging ◽  
Thin Foils ◽  
Transmission Electron

AbstractThis paper presents investigations of magnetization configuration evolution during in-situ magnetic processes in materials exhibiting planar and perpendicular magnetic anisotropy. Transmission electron microscopy has been used to perform magnetic imaging. Fresnel contrasts in Lorentz Transmission Electron Microscopy (LTEM) and phase retrieval methods such as Transport of Intensity Equation (TIE) solving or electron holography have been implemented. These techniques are sensitive to magnetic induction perpendicular to the electron beam and can give access to a spatially resolved (resolution better than 10 nm) mapping of magnetic induction distribution and could be extended to dynamical studies during in-situ observation. Thin foils of FePd alloys with a strong perpendicular magnetic anisotropy (PMA) and self-assembled Fe dots are presented. Both are studied during magnetization processes exhibiting the capacities of in-situ magnetic imaging in a TEM.

Reactions in Metal-Metalloid Multilayers

1993 ◽  
Vol 311 ◽  
Author(s):  
Robert Sinclair ◽  
Toyohiko J. Konno
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Reactive Systems ◽  
Nucleation And Growth ◽  
In Situ Observation ◽  
Scanning Calorimetry ◽  
Compound Formation ◽  
Transmission Electron

ABSTRACTWe have studied the reactions at metal-metalloid interfaces using high resolution transmission electron microscopy, including in situ observation, and differential scanning calorimetry. There is contrasting behavior depending on the affinity for interaction or segregation. For reactive systems, compound formation ultimately results, but this can be preceded by solidstate amorphization. For non-reactive systems, crystallization of the metalloid is often achieved with nucleation and growth mediated by the metal phase.

THE INHIBITION EFFECT OF ZINC AND SILICATE IONS ON PITTING CORROSION INDUCED BY CERIUM(III) IONS OF CARBON STEEL IN SODIUM CHLORIDE SOLUTION

2020 ◽  
pp. 2050038
Author(s):  
QIONGWEI LI
Keyword(s):  
Sodium Chloride ◽  
Carbon Steel ◽  
Pitting Corrosion ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Corrosion Potential ◽  
In Situ Observation ◽  
Inhibition Effect ◽  
Synergistic Inhibition

Pitting corrosion of carbon steel in sodium chloride solution induced by Ce[Formula: see text] and the synergistic inhibition effects of Ce[Formula: see text] and Zn[Formula: see text]/SiO[Formula: see text] were investigated using in-situ observation and electrochemical methods. The results showed that the presence of Ce[Formula: see text] could result in severe pitting corrosion and a positive shift in the corrosion potential. It was found that individual Ce[Formula: see text], Zn[Formula: see text], or SiO[Formula: see text] had low inhibition efficiencies, whereas the combination of Ce[Formula: see text] and Zn[Formula: see text] or SiO[Formula: see text] proved to be highly effective in inhibiting the development of pits in two different ways and in enhancing the corrosion resistance. The pitting corrosion and inhibition mechanisms were discussed based on the results.

Sign in / Sign up

Export Citation Format

Share Document