scholarly journals On the Path to a New Generation of Cement-Based Composites through the Use of Lignocellulosic Micro/Nanofibers

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1584 ◽  
Author(s):  
Rafel Reixach ◽  
Josep Claramunt ◽  
M. Àngel Chamorro ◽  
Joan Llorens ◽  
M. Mercè Pareta ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Low Cost ◽  
Water Immersion ◽  
Cellulose Nanofibers ◽  
Cement Matrix ◽  
Mechanical And Thermal Properties ◽  
Pine Sawdust ◽  
Potential Applications ◽  
Extended Surface ◽  
New Generation

Due to its high biocompatibility, bio-degradability, and low cost, cellulose finds application in disparate areas of research. Here we focus our attention on the potential applications of cellulose nanofiber in cement-based materials for the building sector. We first describe the chemical/morphological composition of cellulose fibers, their process and treatment, the characterization of cement-based composites, and their flexural strength. In recent research in this field, cellulose has been considered in the form of nano-sized particles, i.e., cellulose nanofibers (CNF) or cellulose nanocrystals (CNC). CNF and CNC are used for several reasons, including their mechanical and thermal properties, their extended surface area and low toxicity. This study presents some potential applications of lignocellulosic micro/nanofibers (LCMNF) in cement-based composites in order to improve flexural strength. Samples were made with 0.5-1.0-1.5-2.0 wt% of LCMNF obtained from pine sawdust, CEM I (Portland) and a 1:3 cement-water ratio. The composites were then tested for flexural strength at 7, 14, and 28 days and the evolution of flexural strength was assessed after water immersion during 72 h. Scanning electron microscopy was employed to visualize the bond between LCMNF and the cement matrix. Results showed that LCMNF improved the flexural strength of the composite in all the dosages used.

A Novel, Low-Cost C-C Composite Heat Sink Material

1996 ◽  
Vol 445 ◽  
Author(s):  
W. Kowbel ◽  
V. Chellappa ◽  
J.C. Withers
Keyword(s):  
Thermal Conductivity ◽  
Heat Sink ◽  
Low Cost ◽  
Mechanical And Thermal Properties ◽  
New Class ◽  
Dielectric Coatings ◽  
Potential Applications ◽  
New Material ◽  
New Type ◽  
Composite Heat

AbstractRapid advances in high power electronics packaging require the development of new heat sink materials. Advanced composites designed to provide thermal expansion control as well as improved thermal conductivity have the potential to provide benefits in the removal of excess heat from electronic devices. Carbon-carbon (C-C) composits are under consideration for several military and space electronic applications including SEM-E electronic boxes. The high cost of C-C composits has greatly hindered their wide spread commercialization. A new manufacturing process has been developed to produce high thermal conductivity (over 400 W/mK) C-C composites at greatly reduced cost (less than $50/lb). This new material has potential applications as both a heat sink and a substrate. Dielectric coatings such as A1N and diamond were applied to this new type of heat sink material. Processing, as well as mechanical and thermal properties of this new class of heat sink material will be presented.

Thermal, Strength and Leachability Characteristics of Cellulose Fibre Reinforced Lime-Soil Brick

2016 ◽  
Vol 703 ◽  
pp. 386-395 ◽  
Author(s):  
Weerapol Namboonruang ◽  
Prayoon Yongam-Nuai
Keyword(s):  
Thermal Conductivity ◽  
Flexural Strength ◽  
Low Cost ◽  
Extraction Procedure ◽  
Cellulose Fibre ◽  
Local Area ◽  
Mechanical And Thermal Properties ◽  
Natural Cellulose ◽  
Mechanical Performances ◽  
Masonry Units

This research studies on the possibility of producing a more sustainable lightweight brick. Natural cellulose fibre produced from leaf and wood aggregates, lime and soil from local area of Thailand were added into the brick with minimizing Portland cement content. Effects of varied amount of cellulose fibre contents typically (10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and 60 %) on mechanical and thermal properties of bricks are studied. Mechanical performances have been investigated with compressive, flexural strength and thermal conductivity of the samples. Also, the Leachate Extraction Procedure is observed. Results showed that adding more cellulose fibre contents can reduce the thermal conductivity, density including the compressive and flexural strength of the brick. On the other hand, the water absorption increases. It is also shown that the composite bricks can add fibre contents up to 55% by weight that can be used as non-load bearing concrete masonry units considered by the compressive strength. By conclusion, this application may be an interesting solution in order to improve sustainability and energy efficiency of the low cost house in local area of Thailand.

scholarly journals Facile Synthesis and Characterization of Palm CNF-ZnO Nanocomposites with Antibacterial and Reinforcing Properties

2021 ◽  
Vol 22 (11) ◽  
pp. 5781
Author(s):  
Janarthanan Supramaniam ◽  
Darren Yi Sern Low ◽  
See Kiat Wong ◽  
Loh Teng Hern Tan ◽  
Bey Fen Leo ◽  
...  
Keyword(s):  
Plant Biomass ◽  
Cellulose Nanofibers ◽  
High Strength ◽  
Salmonella Typhi ◽  
Particle Sizes ◽  
Mechanical Reinforcement ◽  
Uniform Size ◽  
Preparation Methods ◽  
Potential Applications

Cellulose nanofibers (CNF) isolated from plant biomass have attracted considerable interests in polymer engineering. The limitations associated with CNF-based nanocomposites are often linked to the time-consuming preparation methods and lack of desired surface functionalities. Herein, we demonstrate the feasibility of preparing a multifunctional CNF-zinc oxide (CNF-ZnO) nanocomposite with dual antibacterial and reinforcing properties via a facile and efficient ultrasound route. We characterized and examined the antibacterial and mechanical reinforcement performances of our ultrasonically induced nanocomposite. Based on our electron microscopy analyses, the ZnO deposited onto the nanofibrous network had a flake-like morphology with particle sizes ranging between 21 to 34 nm. pH levels between 8–10 led to the formation of ultrafine ZnO particles with a uniform size distribution. The resultant CNF-ZnO composite showed improved thermal stability compared to pure CNF. The composite showed potent inhibitory activities against Gram-positive (methicillin-resistant Staphylococcus aureus (MRSA)) and Gram-negative Salmonella typhi (S. typhi) bacteria. A CNF-ZnO-reinforced natural rubber (NR/CNF-ZnO) composite film, which was produced via latex mixing and casting methods, exhibited up to 42% improvement in tensile strength compared with the neat NR. The findings of this study suggest that ultrasonically-synthesized palm CNF-ZnO nanocomposites could find potential applications in the biomedical field and in the development of high strength rubber composites.

scholarly journals Visualization of Surface Acoustic Waves in Thin Liquid Films

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
R. W. Rambach ◽  
J. Taiber ◽  
C. M. L. Scheck ◽  
C. Meyer ◽  
J. Reboud ◽  
...  
Keyword(s):  
Liquid Film ◽  
Acoustic Waves ◽  
Low Cost ◽  
Thin Liquid Film ◽  
Surface Acoustic Waves ◽  
Liquid Films ◽  
Theoretical Description ◽  
Propagation Path ◽  
Microfluidic Channels ◽  
Potential Applications

Abstract We demonstrate that the propagation path of a surface acoustic wave (SAW), excited with an interdigitated transducer (IDT), can be visualized using a thin liquid film dispensed onto a lithium niobate (LiNbO3) substrate. The practical advantages of this visualization method are its rapid and simple implementation, with many potential applications including in characterising acoustic pumping within microfluidic channels. It also enables low-cost characterisation of IDT designs thereby allowing the determination of anisotropy and orientation of the piezoelectric substrate without the requirement for sophisticated and expensive equipment. Here, we show that the optical visibility of the sound path critically depends on the physical properties of the liquid film and identify heptane and methanol as most contrast rich solvents for visualization of SAW. We also provide a detailed theoretical description of this effect.

scholarly journals A Review on Electroporation-Based Intracellular Delivery

Molecules ◽  
2018 ◽  
Vol 23 (11) ◽  
pp. 3044 ◽  
Author(s):  
Junfeng Shi ◽  
Yifan Ma ◽  
Jing Zhu ◽  
Yuanxin Chen ◽  
Yating Sun ◽  
...  
Keyword(s):  
Viral Vectors ◽  
Safety Issue ◽  
Intracellular Delivery ◽  
Cellular Reprogramming ◽  
Gene Therapies ◽  
Potential Safety ◽  
Potential Applications ◽  
Dose Control ◽  
Intracellular Probe ◽  
New Generation

Intracellular delivery is a critical step in biological discoveries and has been widely utilized in biomedical research. A variety of molecular tools have been developed for cell-based gene therapies, including FDA approved CAR-T immunotherapy, iPSC, cell reprogramming and gene editing. Despite the inspiring results of these applications, intracellular delivery of foreign molecules including nucleic acids and proteins remains challenging. Efficient yet non-invasive delivery of biomolecules in a high-throughput manner has thus long fascinates the scientific community. As one of the most popular non-viral technologies for cell transfection, electroporation has gone through enormous development with the assist of nanotechnology and microfabrication. Emergence of miniatured electroporation system brought up many merits over the weakness of traditional electroporation system, including precise dose control and high cell viability. These new generation of electroporation systems are of considerable importance to expand the biological applications of intracellular delivery, bypassing the potential safety issue of viral vectors. In this review, we will go over the recent progresses in the electroporation-based intracellular delivery and several potential applications of cutting-edge research on the miniatured electroporation, including gene therapy, cellular reprogramming and intracellular probe.

scholarly journals Recent Findings in Azaphilone Pigments

2021 ◽  
Vol 7 (7) ◽  
pp. 541
Author(s):  
Lúcia P. S. Pimenta ◽  
Dhionne C. Gomes ◽  
Patrícia G. Cardoso ◽  
Jacqueline A. Takahashi
Keyword(s):  
Water Solubility ◽  
Biological Activities ◽  
Low Cost ◽  
Scale Up ◽  
Structural Diversity ◽  
Downstream Processing ◽  
Global Market ◽  
Yield Improvement ◽  
Potential Applications ◽  
New Compounds

Filamentous fungi are known to biosynthesize an extraordinary range of azaphilones pigments with structural diversity and advantages over vegetal-derived colored natural products such agile and simple cultivation in the lab, acceptance of low-cost substrates, speed yield improvement, and ease of downstream processing. Modern genetic engineering allows industrial production, providing pigments with higher thermostability, water-solubility, and promising bioactivities combined with ecological functions. This review, covering the literature from 2020 onwards, focuses on the state-of-the-art of azaphilone dyes, the global market scenario, new compounds isolated in the period with respective biological activities, and biosynthetic pathways. Furthermore, we discussed the innovations of azaphilone cultivation and extraction techniques, as well as in yield improvement and scale-up. Potential applications in the food, cosmetic, pharmaceutical, and textile industries were also explored.

scholarly journals Color-Variable Photodynamic Antimicrobial Wool/Acrylic Blended Fabrics

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4141
Author(s):  
Tingting Wang ◽  
Wangbingfei Chen ◽  
Tingting Dong ◽  
Zihao Lv ◽  
Siming Zheng ◽  
...  
Keyword(s):  
Low Cost ◽  
Pathogen Transmission ◽  
Cationic Dyes ◽  
Light Illumination ◽  
Antibacterial Studies ◽  
Wool Fibers ◽  
Visible Light Illumination ◽  
Potential Applications ◽  
Dyed Fabrics ◽  
Acrylic Fibers

Towards the goal of developing scalable, economical and effective antimicrobial textiles to reduce infection transmission, here we prepared color-variable photodynamic materials comprised of photosensitizer (PS)-loaded wool/acrylic (W/A) blends. Wool fibers in the W/A blended fabrics were loaded with the photosensitizer rose bengal (RB), and the acrylic fibers were dyed with a variety of traditional cationic dyes (cationic yellow, cationic blue and cationic red) to broaden their color range. Investigations on the colorimetric and photodynamic properties of a series of these materials were implemented through CIELab evaluation, as well as photooxidation and antibacterial studies. Generally, the photodynamic efficacy of these dual-dyed fabrics was impacted by both the choice, and how much of the traditional cationic dye was employed in the dyeing of the W/A fabrics. When compared with the PS-only singly-dyed material, RB-W/A, that showed a 99.97% (3.5 log units; p = 0.02) reduction of Staphylococcus aureus under visible light illumination (λ ≥ 420 nm, 60 min), the addition of cationic dyes led to a slight decrease in the photoinactivation ability of the dual-dyed fabrics, but was still able to achieve a 99.3% inactivation of S. aureus. Overall, our findings demonstrate the feasibility and potential applications of low cost and color variable RB-loaded W/A blended fabrics as effective self-disinfecting textiles against pathogen transmission.

Synthesis and characterization of hyperbranched poly (sulfone-amine) modified β-cyclodextrin

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
Liang Chen ◽  
Peng He ◽  
Zhifeng Jia ◽  
Xinyuan Zhu ◽  
Deyue Yan
Keyword(s):  
Drug Delivery ◽  
Low Cost ◽  
Food Additives ◽  
Synthesis And Characterization ◽  
Good Solubility ◽  
Low Viscosity ◽  
Hyperbranched Poly ◽  
Potential Applications ◽  
Inclusion Ability

AbstractAn economical strategy to prepare hyperbranched poly(sulfone-amine) modified β-cyclodextrins (HPSA-m-CDs) from natural β-cyclodextrin (β-CD) and other commercially available materials has been reported. The final product has many good properties of hyperbranched poly(sulfone-amine)s (good solubility, low viscosity etc.), while its inclusion ability can also be well kept. It is a feasible approach to prepare functionalized modified cyclodextrin at very low cost, and may have potential applications in the fields of catalysis, drug delivery, food additives, etc.

A review of passive self-sensing tag

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Yawei Xu ◽  
Lihong Dong ◽  
Haidou Wang ◽  
Jiannong Jing ◽  
Yongxiang Lu
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Low Cost ◽  
Integrated Sensor ◽  
Content Type ◽  
Passive Sensing ◽  
Static Information ◽  
Potential Applications ◽  
Frequency Identification ◽  
Identification Tags

Purpose Radio frequency identification tags for passive sensing have attracted wide attention in the area of Internet of Things (IoT). Among them, some tags can sense the property change of objects without an integrated sensor, which is a new trend of passive sensing based on tag. The purpose of this paper is to review recent research on passive self-sensing tags (PSSTs). Design/methodology/approach The PSSTs reported in the past decade are classified in terms of sensing mode, composition and the ways of power supply. This paper presents operation principles of PSSTs and analyzes the characteristics of them. Moreover, the paper focuses on summarizing the latest sensing parameters of PSSTs and their matching equipment. Finally, some potential applications and challenges faced by this emerging technique are discussed. Findings PSST is suitable for long-term and large-scale monitoring compared to conventional sensors because it gets rid of the limitation of battery and has relatively low cost. Also, the static information of objects stored in different PSSTs can be identified by a single reader without touch. Originality/value This paper provides a detailed and timely review of the rapidly growing research in PSST.

scholarly journals Modelling of new generation plasma optical devices

Nukleonika ◽  
2016 ◽  
Vol 61 (2) ◽  
pp. 207-212 ◽  
Author(s):  
Irina V. Litovko ◽  
Alexy A. Goncharov ◽  
Andrew N. Dobrovolskiy ◽  
Lily V. Naiko ◽  
Irina V. Naiko
Keyword(s):  
Low Cost ◽  
Rocket Engine ◽  
Cost Effective ◽  
Optical Devices ◽  
High Tech ◽  
Practical Applications ◽  
Plasma Accelerators ◽  
New Generation ◽  
Closed Electron ◽  
Positive Space

Abstract The paper presents new generation plasma optical devices based on the electrostatic plasma lens configuration that opens a novel attractive possibility for effective high-tech practical applications. Original approaches to use of plasma accelerators with closed electron drift and open walls for the creation of a cost-effective low-maintenance plasma lens with positive space charge and possible application for low-cost, low-energy rocket engine are described. The preliminary experimental, theoretical and simulation results are presented. It is noted that the presented plasma devices are attractive for many different applications in the state-of-the-art vacuum-plasma processing.

Sign in / Sign up

Export Citation Format

Share Document