scholarly journals Efficient Calculation Methods for the Diffusion Coefficient of Interstitial Solutes in Dilute Alloys

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1491
Author(s):  
Xiaoshuang Wang ◽  
Jürgen Faßbender ◽  
Matthias Posselt
Keyword(s):  
Diffusion Coefficient ◽  
Density Functional ◽  
Kinetic Monte Carlo ◽  
Binding Energies ◽  
Interaction Region ◽  
Efficient Manner ◽  
Host Materials ◽  
Substitutional Solute ◽  
Efficient Calculation ◽  
Analytical Expressions

In the example of oxygen diffusion in dilute ferritic iron alloys it is shown that the calculation of the diffusion coefficient can be separated into a contribution related to the migration in the interaction region between oxygen and the substitutional solute and a part related to diffusion in pure body centered cubic (bcc) Fe. The corresponding diffusion times are determined by analytical expressions using Density-Functional-Theory (DFT) data for the respective binding energies. The diffusion coefficient in the interaction region must be determined by atomistic kinetic Monte Carlo (AKMC) simulations with DFT values for the migration barriers as input data. In contrast to previous calculations, AKMC simulation must only be performed for one concentration of the substitutional solute, and the obtained results can be employed to obtain data for other concentrations in a very efficient manner. This leads to a tremendous decrease of computational efforts. Under certain conditions it is even possible to use analytical expressions where merely DFT data for the binding energies are needed. The limits of applicability of the presented calculation procedures are discussed in detail. The methods presented in this work can be generalized to interstitial diffusion in other host materials with small concentrations of substitutional solutes.

Mechanisms of Diffusion and Dissociation of E-Centers in Silicon

2005 ◽  
Vol 237-240 ◽  
pp. 1129-1134
Author(s):  
Mariya G. Ganchenkova ◽  
V.A. Borodin ◽  
Risto M. Nieminen
Keyword(s):  
Density Functional Theory ◽  
Monte Carlo ◽  
Ab Initio Calculations ◽  
Ab Initio ◽  
Density Functional ◽  
Kinetic Monte Carlo ◽  
Binding Energies ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Charge States

In this paper we discuss possible mechanisms of PV annealing in Si. Our approach includes a combination of density functional theory and lattice kinetic Monte-Carlo (LKMC) simulations. The density functional theory is used to find the binding energies and jump barriers for P-V pair at different separations (from one to three interatomic bonds between complex constituents) and in different charge states. The mobility of the complex is simulated by LKMC with event probabilities calculated based on the energies from ab-initio calculations. .

THERMAL DIFFUSION DYNAMIC BEHAVIOR OF TWO-DIMENSIONAL Ag-SMALL CLUSTERS ON Ag(1 1 1) SURFACE

2015 ◽  
Vol 22 (05) ◽  
pp. 1550067 ◽  
Author(s):  
ZAKIRUR-REHMAN ◽  
SARDAR SIKANDAR HAYAT
Keyword(s):  
Diffusion Coefficient ◽  
Ab Initio ◽  
Thermal Diffusion ◽  
Energy Barrier ◽  
Density Functional ◽  
Kinetic Monte Carlo ◽  
Md Simulations ◽  
Single Atom ◽  
Two Dimensional ◽  
Effective Energy

In this paper, the thermal diffusion behavior of small two-dimensional Ag -islands on Ag (1 1 1) surface has been explored using molecular dynamics (MD) simulations. The approach is based on semi-empirical potentials. The key microscopic processes responsible for the diffusion of Ag 1−5 adislands on Ag (1 1 1) surface are identified. The hopping and zigzag concerted motion along with rotation are observed for Ag one-atom to three-atom islands while single-atom and multi-atom processes are revealed for Ag four-atom and five-atom islands, during the diffusion on Ag (1 1 1) surface. The same increasing/decreasing trend in the diffusion coefficient and effective energy barrier is observed in both the self learning kinetic Monte Carlo (SLKMC) and MD calculations, for the temperature range of 300–700 K. An increase in the value of effective energy barrier is noticed with corresponding increase in the number of atoms in Ag -adislands. A reasonable linear fit is observed for the diffusion coefficient for studied temperatures (300, 500 and 700 K). For the observed diffusion mechanisms, our findings are in good agreement with ab initio density-functional theory (DFT) calculations for Al / Al (1 1 1) while the energy barrier values are in same range as the experimental values for Cu / Ag (1 1 1) and the theoretical values using ab initio DFT supplemented with embedded-atom method for Ag / Ag (1 1 1).

scholarly journals Tuning the electronic structure of Ag-Pd alloys to enhance performance for alkaline oxygen reduction

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
José A. Zamora Zeledón ◽  
Michaela Burke Stevens ◽  
G. T. Kasun Kalhara Gunasooriya ◽  
Alessandro Gallo ◽  
Alan T. Landers ◽  
...  
Keyword(s):  
Metal Binding ◽  
Precious Metal ◽  
Metal Content ◽  
Density Functional ◽  
Binding Energies ◽  
Intrinsic Activity ◽  
Energy Technologies ◽  
Highly Active ◽  
Wide Range ◽  
Precious Metal Content

AbstractAlloying is a powerful tool that can improve the electrocatalytic performance and viability of diverse electrochemical renewable energy technologies. Herein, we enhance the activity of Pd-based electrocatalysts via Ag-Pd alloying while simultaneously lowering precious metal content in a broad-range compositional study focusing on highly comparable Ag-Pd thin films synthesized systematically via electron-beam physical vapor co-deposition. Cyclic voltammetry in 0.1 M KOH shows enhancements across a wide range of alloys; even slight alloying with Ag (e.g. Ag0.1Pd0.9) leads to intrinsic activity enhancements up to 5-fold at 0.9 V vs. RHE compared to pure Pd. Based on density functional theory and x-ray absorption, we hypothesize that these enhancements arise mainly from ligand effects that optimize adsorbate–metal binding energies with enhanced Ag-Pd hybridization. This work shows the versatility of coupled experimental-theoretical methods in designing materials with specific and tunable properties and aids the development of highly active electrocatalysts with decreased precious-metal content.

scholarly journals Nanotechnology-based approaches for targeting and delivery of drugs via Hexakis (m-PE) macrocycles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Samaneh Pasban ◽  
Heidar Raissi
Keyword(s):  
Drug Delivery ◽  
Density Functional ◽  
Water Solution ◽  
Decomposition Analysis ◽  
Binding Energies ◽  
Energy Decomposition Analysis ◽  
Partial Density ◽  
High Propensity ◽  
The Stability ◽  
Novel Applications

AbstractHexakis (m-phenylene ethynylene) (m-PE) macrocycles, with aromatic backbones and multiple hydrogen-bonding side chains, had a very high propensity to self-assemble via H-bond and π–π stacking interactions to form nanotubular structures with defined inner pores. Such stacking of rigid macrocycles is leading to novel applications that enable the researchers to explored mass transport in the sub-nanometer scale. Herein, we performed density functional theory (DFT) calculations to examine the drug delivery performance of the hexakis dimer as a novel carrier for doxorubicin (DOX) agent in the chloroform and water solvents. Based on the DFT results, it is found that the adsorption of DOX on the carrier surface is typically physisorption with the adsorption strength values of − 115.14 and − 83.37 kJ/mol in outside and inside complexes, respectively, and so that the essence of the drug remains intact. The negative values of the binding energies for all complexes indicate the stability of the drug molecule inside and outside the carrier's cavities. The energy decomposition analysis (EDA) has also been performed and shown that the dispersion interaction has an essential role in stabilizing the drug-hexakis dimer complexes. To further explore the electronic properties of dox, the partial density of states (PDOS and TDOS) are calculated. The atom in molecules (AIM) and Becke surface (BS) methods are also analyzed to provide an inside view of the nature and strength of the H-bonding interactions in complexes. The obtained results indicate that in all studied complexes, H-bond formation is the driving force in the stabilization of these structures, and also chloroform solvent is more favorable than the water solution. Overall, our findings offer insightful information on the efficient utilization of hexakis dimer as drug delivery systems to deliver anti-cancer drugs.

scholarly journals A Comparative Study of Oxygen and Hydrogen Adsorption on Strained and Alloy-Supported Pt(111) Monolayers

2021 ◽  
Vol 7 (7) ◽  
pp. 101
Author(s):  
Ian Shuttleworth
Keyword(s):  
Comparative Study ◽  
Density Functional ◽  
Hydrogen Adsorption ◽  
Binding Energies ◽  
High Symmetry ◽  
Density Functionals ◽  
Functional Theory ◽  
Ligand Effects ◽  
Ferromagnetic Alloys ◽  
Depth Study

A comparative study of the unreacted and reacted uniaxially strained Pt(111) and the layered (111)-Pt/Ni/Pt3Ni and (111)-Pt/Ni/PtNi3 surfaces has been performed using density functional theory (DFT). An in-depth study of the unreacted surfaces has been performed to evaluate the importance of geometric, magnetic and ligand effects in determining the reactivity of these different Pt surfaces. An analysis of the binding energies of oxygen and hydrogen over the high-symmetry binding positions of all surfaces has been performed. The study has shown that O and H tend to bind more strongly to the (111)-Pt/Ni/Pt3Ni surface and less strongly to the (111)-Pt/Ni/PtNi3 surface compared to binding on the equivalently strained Pt(111) surfaces. Changes in the surface magnetisation of the surfaces overlaying the ferromagnetic alloys during adsorption are discussed, as well as the behaviour of the d-band centre across all surfaces, to evaluate the potential mechanisms for these differences in binding. An accompanying comparison of the accessible density functionals has been included to estimate the error in the computational binding energies.

A DFT study of spherands containing five anisyl groups — Highly preorganized to bind the alkali metal

2006 ◽  
Vol 84 (8) ◽  
pp. 1045-1049 ◽  
Author(s):  
Shabaan AK Elroby ◽  
Kyu Hwan Lee ◽  
Seung Joo Cho ◽  
Alan Hinchliffe
Keyword(s):  
Density Functional Theory ◽  
Binding Energy ◽  
Density Functional ◽  
Ionic Radius ◽  
Binding Energies ◽  
Cavity Size ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Good Agreement

Although anisyl units are basically poor ligands for metal ions, the rigid placements of their oxygens during synthesis rather than during complexation are undoubtedly responsible for the enhanced binding and selectivity of the spherand. We used standard B3LYP/6-31G** (5d) density functional theory (DFT) to investigate the complexation between spherands containing five anisyl groups, with CH2–O–CH2 (2) and CH2–S–CH2 (3) units in an 18-membered macrocyclic ring, and the cationic guests (Li+, Na+, and K+). Our geometric structure results for spherands 1, 2, and 3 are in good agreement with the previously reported X-ray diffraction data. The absolute values of the binding energy of all the spherands are inversely proportional to the ionic radius of the guests. The results, taken as a whole, show that replacement of one anisyl group by CH2–O–CH2 (2) and CH2–S–CH2 (3) makes the cavity bigger and less preorganized. In addition, both the binding and specificity decrease for small ions. The spherands 2 and 3 appear beautifully preorganized to bind all guests, so it is not surprising that their binding energies are close to the parent spherand 1. Interestingly, there is a clear linear relation between the radius of the cavity and the binding energy (R2 = 0.999).Key words: spherands, preorganization, density functional theory, binding energy, cavity size.

scholarly journals A New Piano-Stool Ruthenium(II) P-Cymene-Based Complex: Crystallographic, Hirshfeld Surface, DFT, and Luminescent Studies

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 13
Author(s):  
Mohd. Muddassir ◽  
Abdullah Alarifi ◽  
Mohd. Afzal
Keyword(s):  
Density Functional ◽  
Weak Interactions ◽  
Energy Levels ◽  
Hirshfeld Surface ◽  
Binding Energies ◽  
Orbital Energy ◽  
Aminosalicylic Acid ◽  
Full Characterization

A new complex (Ru(η6-p-cymene)(5-ASA)Cl2) (1) where 5-ASA is 5-aminosalicylic acid has been prepared by reacting the ruthenium arene precursors ((η6-arene)Ru(μ-Cl)Cl)2, with the 5-ASA ligands in a 1:1 ratio. Full characterization of complex 1 was accomplished by elemental analysis, IR, and TGA following the structure obtained from a single-crystal X-ray pattern. The structural analysis revealed that complex 1 shows a “piano-stool” geometry with Ru-C (2.160(5)- 2.208(5)Å), Ru-N (2.159(4) Å) distances, which is similar to equivalents sister complex. Density functional theory (DFT) was used to calculate the significant molecular orbital energy levels, binding energies, bond angles, bond lengths, and spectral data (FTIR, NMR, and UV–VIS) of complex 1, consistent with the experimental results. The IR and UV–VIS spectra of complex 1 were computed using all of the methods and choose the most appropriate way to discuss. Hirshfeld surface analysis was also executed to understand the role of weak interactions such as H⋯H, C⋯H, C-H⋯π, and vdW interactions, which play a significant role in the crystal environment’s stability. Moreover, the luminescence results at room temperature show that complex 1 gives a more intense emission band positioned at 465 nm upon excitation at 330 nm makes it a suitable candidate for the building of photoluminescent material.

STRUCTURES, ELECTRONIC AND MAGNETIC PROPERTIES OF C20 FULLERENES DOPED TRANSITION METAL ATOMS M@C20 (M = Fe, Co, Ti, V)

2010 ◽  
Vol 21 (12) ◽  
pp. 1469-1477 ◽  
Author(s):  
M. SAMAH ◽  
B. BOUGHIDEN
Keyword(s):  
Density Functional Theory ◽  
Magnetic Moment ◽  
Density Functional ◽  
Binding Energies ◽  
Functional Theory ◽  
Magnetic Dipoles ◽  
Metal Atoms ◽  
Transition Metal Atoms ◽  
Semiconductor Behavior ◽  
Co Doped

Structures, binding energies, magnetic and electronic properties endohedrally doped C 20 fullerenes by metallic atoms ( Fe , Co , Ti and V ) have been obtained by pseudopotential density functional theory. All M @ C 20, except Co @ C 20, are more stable than the undoped C 20 cage. The magnetic moment values are 1 and 2μB. These values and semiconductor behavior give to these compounds interesting feature in several technological applications. Titanium doped C 20 has a same magnetic moment than the isolated Ti atom. Hybridization process in the Co doped C 20 fullerene is most strong than in other doped cages. Electrical and magnetic dipoles calculated in the iron doped C 20 are very strong compared with other clusters.

CAN SEMIEMPIRICAL QUANTUM MODELS CALCULATE THE BINDING ENERGY OF HYDROGEN BONDING FOR BIOLOGICAL SYSTEMS?

2009 ◽  
Vol 08 (04) ◽  
pp. 691-711 ◽  
Author(s):  
FENG FENG ◽  
HUAN WANG ◽  
WEI-HAI FANG ◽  
JIAN-GUO YU
Keyword(s):  
Hydrogen Bonding ◽  
Amino Acid ◽  
Amino Acid Residue ◽  
Density Functional ◽  
Biological Systems ◽  
Binding Energies ◽  
Semiempirical Model ◽  
Hydrogen Bonded Systems ◽  
High Level ◽  
Hydrogen Bonded

A modified semiempirical model named RM1BH, which is based on RM1 parameterizations, is proposed to simulate varied biological hydrogen-bonded systems. The RM1BH is formulated by adding Gaussian functions to the core–core repulsion items in original RM1 formula to reproduce the binding energies of hydrogen bonding of experimental and high-level computational results. In the parameterizations of our new model, 35 base-pair dimers, 18 amino acid residue dimers, 14 dimers between a base and an amino acid residue, and 20 other multimers were included. The results performed with RM1BH were compared with experimental values and the benchmark density-functional (B3LYP/6-31G**/BSSE) and Möller–Plesset perturbation (MP2/6-31G**/BSSE) calculations on various biological hydrogen-bonded systems. It was demonstrated that RM1BH model outperforms the PM3 and RM1 models in the calculations of the binding energies of biological hydrogen-bonded systems by very close agreement with the values of both high-level calculations and experiments. These results provide insight into the ideas, methods, and views of semiempirical modifications to investigate the weak interactions of biological systems.

Sign in / Sign up

Export Citation Format

Share Document