scholarly journals Influence of Ammonium Polyphosphate/Lignin Ratio on Thermal and Fire Behavior of Biobased Thermoplastic: The Case of Polyamide 11

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1146 ◽  
Author(s):  
Aurélie Cayla ◽  
François Rault ◽  
Stéphane Giraud ◽  
Fabien Salaün ◽  
Rodolphe Sonnier ◽  
...  
Keyword(s):  
Flame Retardancy ◽  
Flame Retardants ◽  
Fire Behavior ◽  
Melting Process ◽  
Development Trend ◽  
Ammonium Polyphosphate ◽  
Polyamide 11 ◽  
Biobased Materials ◽  
Combustion Flow ◽  
Fire Properties

Flame retardancy of polymers is a recurring obligation for many applications. The development trend of biobased materials is no exception to this rule, and solutions of flame retardants from agro-resources give an advantage. Lignin is produced as a waste by-product from some industries, and can be used in the intumescent formation development as a source of carbon combined with an acid source. In this study, the flame retardancy of polyamide 11 (PA) is carried out by extrusion with a kraft lignin (KL) and ammonium polyphosphate (AP). The study of the optimal ratio between the KL and the AP makes it possible to optimize the fire properties as well as to reduce the cost and facilitates the implementation of the blend by a melting process. The properties of thermal decomposition and the fire reaction have been studied by thermogravimetric analyzes, pyrolysis combustion flow calorimetry (PCFC) and vertical flame spread tests (UL94). KL permits a charring effect delaying thermal degradation and decreases by 66% the peak of heat release rate in comparison with raw PA. The fire reaction of the ternary blends is improved even if KL-AP association does not have a synergy effect. The 25/75 and 33/67 KL/AP ratios in PA give an intumescence behavior under flame exposure.

scholarly journals Fire Behavior of Wood-Based Composite Materials

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4352
Author(s):  
Juliana Sally Renner ◽  
Rhoda Afriyie Mensah ◽  
Lin Jiang ◽  
Qiang Xu ◽  
Oisik Das ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Wood Fiber ◽  
Fire Behavior ◽  
Manufacturing Techniques ◽  
Materials Used ◽  
Fire Properties ◽  
Wood Based Composite

Wood-based composites such as wood plastic composites (WPC) are emerging as a sustainable and excellent performance materials consisting of wood reinforced with polymer matrix with a variety of applications in construction industries. In this context, wood-based composite materials used in construction industries have witnessed a vigorous growth, leading to a great production activity. However, the main setbacks are their high flammability during fires. To address this issue, flame retardants are utilized to improve the performance of fire properties as well as the flame retardancy of WPC material. In this review, flame retardants employed during manufacturing process with their mechanical properties designed to achieve an enhanced flame retardancy were examined. The addition of flame retardants and manufacturing techniques applied were found to be an optimum condition to improve fire resistance and mechanical properties. The review focuses on the manufacturing techniques, applications, mechanical properties and flammability studies of wood fiber/flour polymer/plastics composites materials. Various flame retardant of WPCs and summary of future prospects were also highlighted.

scholarly journals Thermal Degradation Characteristic and Flame Retardancy of Polylactide-Based Nanobiocomposites

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2648 ◽  
Author(s):  
Kuruma Malkappa ◽  
Jayita Bandyopadhyay ◽  
Suprakas Ray
Keyword(s):  
Thermal Degradation ◽  
Flame Retardancy ◽  
High Performance ◽  
Flame Retardants ◽  
Degradable Polymers ◽  
Melt Blending ◽  
Degradation Characteristic ◽  
Sustainable Materials ◽  
Fire Properties ◽  
Intumescent Flame Retardants

Polylactide (PLA) is one of the most widely used organic bio-degradable polymers. However, it has poor flame retardancy characteristics. To address this disadvantage, we performed melt-blending of PLA with intumescent flame retardants (IFRs; melamine phosphate and pentaerythritol) in the presence of organically modified montmorillonite (OMMT), which resulted in nanobiocomposites with excellent intumescent char formation and improved flame retardant characteristics. Triphenyl benzyl phosphonium (OMMT-1)- and tributyl hexadecyl phosphonium (OMMT-2)-modified MMTs were used in this study. Thermogravimetric analysis in combination with Fourier transform infrared spectroscopy showed that these nanocomposites release a smaller amount of toxic gases during thermal degradation than unmodified PLA. Melt-rheological behaviors supported the conclusions drawn from the cone calorimeter data and char structure of the various nanobiocomposites. Moreover, the characteristic of the surfactant used for the modification of MMT played a crucial role in controlling the fire properties of the composites. For example, the nanocomposite containing 5 wt.% OMMT-1 showed significantly improved fire properties with a 47% and 68% decrease in peak heat and total heat release rates, respectively, as compared with those of unmodified PLA. In summary, melt-blending of PLA, IFR, and OMMT has potential in the development of high-performance PLA-based sustainable materials.

scholarly journals Valorization of Industrial Lignin as Biobased Carbon Source in Fire Retardant System for Polyamide 11 Blends

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 180 ◽  
Author(s):  
Neeraj Mandlekar ◽  
Aurélie Cayla ◽  
François Rault ◽  
Stéphane Giraud ◽  
Fabien Salaün ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Condensed Phase ◽  
Flame Retardants ◽  
Fire Behavior ◽  
Fire Retardant ◽  
Ternary Blends ◽  
Cone Calorimetry ◽  
Polyamide 11 ◽  
Twin Screw ◽  
Flame Retarded

In this study, two different types of industrial lignin (i.e., lignosulphonate lignin (LL) and kraft lignin (DL)) were exploited as charring agents with phosphorus-based flame retardants for polyamide 11 (PA11). The effect of lignins on the thermal stability and fire behavior of PA11 combined with phosphinate additives (namely, aluminum phosphinate (AlP) and zinc phosphinate (ZnP)) has been studied by thermogravimetric analysis (TGA), UL 94 vertical flame spread, and cone calorimetry tests. Various blends of flame retarded PA11 were prepared by melt process using a twin-screw extruder. Thermogravimetric analyses showed that the LL containing ternary blends are able to provide higher thermal stability, as well as a developed char residue. The decomposition of the phosphinates led to the formation of phosphate compounds in the condensed phase, which promotes the formation of a stable char. Flammability tests showed that LL/ZnP ternary blends were able to achieve self-extinction and V-1 classification; the other formulations showed a strong melt dripping and higher burning. In addition to this, cone calorimetry results showed that the most enhanced behavior was found when 10 wt % of LL and AlP were combined, which strongly reduced PHRR (−74%) and THR (−22%), due to the interaction between LL and AlP, which not only promotes char formation but also confers the stability to char in the condensed phase.

Silica precursor as synergist for cotton flame retardancy

2016 ◽  
Vol 28 (3) ◽  
pp. 378-386 ◽  
Author(s):  
Ana Marija Grancaric ◽  
Lea Botteri ◽  
Jenny Alongi ◽  
Anita Tarbuk
Keyword(s):  
Thermal Properties ◽  
Synergistic Effect ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Excellent Thermal Stability ◽  
Content Type ◽  
Silica Precursor

Purpose – The cotton and its blends is the most commonly used textile material in the design and production of protective clothing. However, as the cellulose textiles are the most flammable materials it is necessary to improve its flame retardancy. The government regulations have been the driving force for developing durable flame retardants finishes for textile, to improve its performance and to reduce the negative impact on the environment. The paper aims to discuss these issues. Design/methodology/approach – This paper investigates the effect of silica precursor (tetraethoxysilane – TEOS) added in bath with conventional flame retardant urea/ammonium polyphosphate in full and half concentration for achieving environmental-friendly cotton flame retardancy. Silica precursors have excellent thermal stability and high heat resistance with very limited release of toxic gases during the thermal decomposition. Synergistic effect between urea/ammonium polyphosphate and TEOS has been calculated. Thermal properties of treated cotton fabrics were determined by limiting oxygen index (LOI), thermogravimetric analysis (TGA) and microscale combustion calorimeter (MCC). Findings – TEOS, significantly improves the flame retardancy of cotton when added in the bath with conventional flame retardants urea/ammonium polyphosphate by increasing the LOI values and other thermal properties as increasing char residue measured by TGA and higher heat release rate measured by MCC. Originality/value – This paper represent a good synergistic effect between urea/ammonium polyphosphate and TEOS. This phenomena is evident in better thermal properties when TEOS was added in the bath with conventional flame retardant especially for half concentration of urea/ammonium polyphosphate.

scholarly journals Improving the Flame Retardance of Polyisocyanurate Foams by Dibenzo[d,f][1,3,2]dioxaphosphepine 6-Oxide-Containing Additives

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1242 ◽  
Author(s):  
Lenz ◽  
Pospiech ◽  
Paven ◽  
Albach ◽  
Günther ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Oxidation State ◽  
Chemical Structure ◽  
Flame Retardants ◽  
State Of The Art ◽  
Fire Behavior ◽  
Flame Retardance ◽  
Fire Properties

A series of new flame retardants (FR) based on dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO) incorporating acrylates and benzoquinone were developed previously. In this study, we examine the fire behavior of the new flame retardants in polyisocyanurate (PIR) foams. The foam characteristics, thermal decomposition, and fire behavior are investigated. The fire properties of the foams containing BPPO-based derivatives were found to depend on the chemical structure of the substituents. We also compare our results to state-of-the-art non-halogenated FR such as triphenylphosphate and chemically similar phosphinate, i.e. 9,10-dihydro-9-oxa-10- phosphaphenanthrene-10-oxide (DOPO), based derivatives to discuss the role of the phosphorus oxidation state.

scholarly journals Flame Retardancy, Fire Behavior, and Flame Retardant Mechanism of Intumescent Flame Retardant EPDM Containing Ammonium Polyphosphate/Pentaerythrotol and Expandable Graphite

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4035 ◽  
Author(s):  
Junsheng Wang ◽  
Lei Xue ◽  
Bi Zhao ◽  
Guide Lin ◽  
Xing Jin ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Fire Behavior ◽  
Intumescent Flame Retardant ◽  
Ammonium Polyphosphate ◽  
Infrared Spectrometry ◽  
Expandable Graphite ◽  
Physical Interaction ◽  
Limiting Oxygen Index

The intumescent flame retardant ethylene–propylene–diene rubber (EPDM) was prepared using intumescent flame retardant (IFR), including ammonium polyphosphate (APP) /pentaerythrotol (PER) and expandable graphite (EG), as the flame retardant agent. The effects of IFR and EG on the flame retardancy, fire behavior, and thermal stability of the EPDM were investigated. The results show that IFR and EG have excellent synergistic flame retardant effects. When the mass ratio of IFR to EG is 3:1 and the total addition content is 40 phr, the limiting oxygen index (LOI) value of the EPDM material (EPDM/IFR/EG) can reach 30.4%, and it can pass a V-0 rating in the vertical combustion (UL-94) test. Meanwhile, during the cone calorimetry test, the heat release rate and total heat release of EPDM/IFR/EG are 69.0% and 33.3% lower than that of the pure EPDM, respectively, and the smoke release of the material also decreases significantly, suggesting that the sample shows good fire safety. In addition, the flame retardant mechanism of IFR and EG is systematically investigated by thermogravimetric analysis/infrared spectrometry (TG-IR), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), and the results indicate that IFR and EG have only physical interaction. Moreover, the reason why IFR exhibits a poor flame retardant effect in EPDM materials is explained.

Sign in / Sign up

Export Citation Format

Share Document