scholarly journals Experimental and Numerical Investigation of Mechanical and Thermal Effects in TiNi SMA during Transformation-Induced Creep Phenomena

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 883
Author(s):  
Vladimir Dunić ◽  
Elżbieta Pieczyska ◽  
Zbigniew Kowalewski ◽  
Ryosuke Matsui ◽  
Radovan Slavković
Keyword(s):  
Thermal Effects ◽  
Volume Fraction ◽  
Testing Machine ◽  
Infrared Camera ◽  
Transformation Strain ◽  
Creep Process ◽  
Temperature Changes ◽  
Dependent Development ◽  
Proposed Model ◽  
Partitioned Approach

(1) The paper presents experimental and numerical results of the TiNi shape memory alloy (SMA) subjected to a modified program of force-controlled tensile loading. The time-dependent development of transformation strain under the constant-force conditions was investigated to describe transformation-induced creep phenomena. (2) Mechanical characteristics of the TiNi SMA were derived using a testing machine, whereas the SMA temperature changes accompanying its deformation were obtained in a contactless manner with an infrared camera. A 3D coupled thermo-mechanical numerical analysis, realized in a partitioned approach, was applied to describe the SMA mechanical and thermal responses. (3) The stress and related temperature changes demonstrated how the transformation-induced creep process started and evolved at various stages of the SMA loading. The proposed model reproduced the stress, strain and temperature changes obtained during the experiment well; the latent heat production is in correlation with the amount of the martensitic volume fraction. (4) It was demonstrated how the transformation-induced creep process occurring in the SMA under such conditions was involved in thermo-mechanical couplings and the related temperature changes.

scholarly journals Detection of Elastic Deformation in Metal Materials in Infrared Spectral Range

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5359
Author(s):  
Milan Sapieta ◽  
Vladimír Dekýš ◽  
Ondrej Štalmach ◽  
Alžbeta Sapietová ◽  
Martin Svoboda
Keyword(s):  
Plastic Deformation ◽  
Infrared Spectrum ◽  
Stress Tensor ◽  
Elastic Deformation ◽  
Testing Machine ◽  
Radiant Energy ◽  
Infrared Camera ◽  
Plastic Deformations ◽  
Temperature Changes ◽  
Lock In

The aim of this work is to verify the presence of deformation in the metal specimen from the material AISI 316L by means of lock-in thermography. The specimen was cyclically loaded by the three-point bending in the fatigue testing machine. A response of the specimen to such excitation can be detected in the infrared spectrum and to determine temperature changes during a loading cycle. By means of the lock-in method, an increased signal to noise ratio (radiation energy detected by an infrared camera) was achieved. Besides, the temperature changes were determined on the basis of amplitudes of radiant energy changes detected by the camera. The temperature change (all radiant energy) corresponds with the first invariant of the tensor of deformation and, after a calculation and regarding the material parameters, also the invariant of the stress tensor. The proportionality between the signal from the camera and the first deformation invariant is achieved if the specimen load is an adiabatic event. This process is achieved by choosing a sufficiently high load frequency. In case of a presence origin of plastic deformations, there takes place only part of radiant energy. When we accept the hypothesis of a presence of just elastic deformations and plastic deformation is also present in the monitored process, then the evaluated thermograms based on the assumption of the presence of elastic deformation present anomalies in a distribution of the determined tensor invariant of deformations. These anomalies are caused by a presence of plastic deformations. Based on the anomalies, plastic deformation can be detected and subsequently analyzed. For the tested specimen and the applied load, the calculation of stress tensor was performed. It confirmed a congruence of results obtained by the analysis of the physical process in the infrared spectrum of the mid-wave infrared camera.

scholarly journals Thermal Effects of Laser Irradiation on Maize Seeds

2015 ◽  
Vol 29 (2) ◽  
pp. 147-156 ◽  
Author(s):  
Claudia Hernández Aguilar ◽  
Flavio Arturo Domínguez Pacheco ◽  
Alfredo Cruz Orea ◽  
Rumen Ivanov Tsonchev
Keyword(s):  
Relaxation Time ◽  
Optical Absorption ◽  
Laser Irradiation ◽  
Thermal Effects ◽  
Laser Light ◽  
Infrared Camera ◽  
Optical Absorption Coefficient ◽  
Penetration Length ◽  
Radiative Relaxation ◽  
Temperature Changes

Abstract It is important to know the temperature changes in seeds that have been irradiated with laser light because this could have substantial practical and theoretical importance. Thus, the thermal effects of low intensity laser irradiation on seeds was studied, showing variation of temperature produced by laser light applied during 60 s on two maize seed genotypes, ‘Toluqueño’ and ‘Cacahuazintle’: crystalline and floury, respectively, under two different conditions: natural colour and dyed black, evaluating the temperature changes by a thermal camera. The optical absorption spectra and the non-radiative relaxation time of the seeds were obtained using photoacoustic spectroscopy. The results indicate that it is possible to produce temperature changes, detected by an infrared camera, in crystalline and floury seeds when they are irradiated with a laser beam at a 650 nm wavelength and 27.4 mW power. The highest variation of temperature in the seeds was obtained for the black-dyed condition, these variations being 5.56 and 9.28°C for crystalline and floury seeds, respectively. Among the seeds, in the dyed condition, the floury seed had the lower non-radiative relaxation time, the higher optical absorption coefficient and a lower optical penetration length at the laser wavelength (650 nm).

Modeling of unforced demand response programs

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hassan Jalili ◽  
Pierluigi Siano
Keyword(s):  
Demand Response ◽  
Load Shifting ◽  
Response Models ◽  
Temperature Changes ◽  
Proposed Model ◽  
Equipment Failures ◽  
Demand Response Programs ◽  
Simultaneous Implementation ◽  
Long Term Studies

Abstract Demand response programs are useful options in reducing electricity price, congestion relief, load shifting, peak clipping, valley filling and resource adequacy from the system operator’s viewpoint. For this purpose, many models of these programs have been developed. However, the availability of these resources has not been properly modeled in demand response models making them not practical for long-term studies such as in the resource adequacy problem where considering the providers’ responding uncertainties is necessary for long-term studies. In this paper, a model considering providers’ unavailability for unforced demand response programs has been developed. Temperature changes, equipment failures, simultaneous implementation of demand side management resources, popular TV programs and family visits are the main reasons that may affect the availability of the demand response providers to fulfill their commitments. The effectiveness of the proposed model has been demonstrated by numerical simulation.

scholarly journals A Phenomenological Primary–Secondary–Tertiary Creep Model for Polymer-Bonded Composite Materials

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2353
Author(s):  
Xiaochang Duan ◽  
Hongwei Yuan ◽  
Wei Tang ◽  
Jingjing He ◽  
Xuefei Guan
Keyword(s):  
Composite Materials ◽  
Creep Behavior ◽  
Reference Model ◽  
Creep Model ◽  
Creep Process ◽  
Validation Dataset ◽  
Testing Conditions ◽  
Proposed Model ◽  
Testing Data ◽  
Bonded Composite

This study develops a unified phenomenological creep model for polymer-bonded composite materials, allowing for predicting the creep behavior in the three creep stages, namely the primary, the secondary, and the tertiary stages under sustained compressive stresses. Creep testing is performed using material specimens under several conditions with a temperature range of 20 °C–50 °C and a compressive stress range of 15 MPa–25 MPa. The testing data reveal that the strain rate–time response exhibits the transient, steady, and unstable stages under each of the testing conditions. A rational function-based creep rate equation is proposed to describe the full creep behavior under each of the testing conditions. By further correlating the resulting model parameters with temperature and stress and developing a Larson–Miller parameter-based rupture time prediction model, a unified phenomenological model is established. An independent validation dataset and third-party testing data are used to verify the effectiveness and accuracy of the proposed model. The performance of the proposed model is compared with that of an existing reference model. The verification and comparison results show that the model can describe all the three stages of the creep process, and the proposed model outperforms the reference model by yielding 28.5% smaller root mean squared errors on average.

Study on the generalized k-Hilfer–Prabhakar fractional viscoelastic–plastic model

2021 ◽  
pp. 108128652110258
Author(s):  
Yi-Ying Feng ◽  
Xiao-Jun Yang ◽  
Jian-Gen Liu ◽  
Zhan-Qing Chen
Keyword(s):  
Constitutive Model ◽  
Three Dimensional ◽  
Sensitivity Analyses ◽  
Creep Process ◽  
Fractional Operator ◽  
Modified Model ◽  
Proposed Model ◽  
Accelerated Creep ◽  
The Laplace Transform ◽  
Classical Models

The general fractional operator shows its great predominance in the construction of constitutive model owing to its agility in choosing the embedded parameters. A generalized fractional viscoelastic–plastic constitutive model with the sense of the k-Hilfer–Prabhakar ( k-H-P) fractional operator, which has the character recovering the known classical models from the proposed model, is established in this article. In order to describe the damage in the creep process, a time-varying elastic element [Formula: see text] is used in the proposed model with better representation of accelerated creep stage. According to the theory of the kinematics of deformation and the Laplace transform, the creep constitutive equation and the strain of the modified model are established and obtained. The validity and rationality of the proposed model are identified by fitting with the experimental data. Finally, the influences of the fractional derivative order [Formula: see text] and parameter k on the creep process are investigated through the sensitivity analyses with two- and three-dimensional plots.

Effect of Si Content on Microstructure and Properties of 60Si2CrVA Spring Steel

2014 ◽  
Vol 968 ◽  
pp. 63-66 ◽  
Author(s):  
Fei Zhao ◽  
Zhan Ling Zhang ◽  
Jun Shuai Li ◽  
Cui Ye ◽  
Ni Li
Keyword(s):  
Mechanical Properties ◽  
Retained Austenite ◽  
Volume Fraction ◽  
Testing Machine ◽  
Spring Steel ◽  
Impact Testing ◽  
X Ray ◽  
Comprehensive Properties ◽  
Spring Steels ◽  
Si Content

The microstructure and mechanical properties of the four spring steels with different Si content treated by Q-I-Q-T process were studied by metallographic microscope, MTS, impact testing machine and X-ray stress analyzer. The results show that the tensile strength and yield strength is first increased and then decreased with the increase of Si content, the volume fraction of retained austenite and elongation are fist decreased and then increased when the Si content is less than 2.1%, and the microstructure become finer and homogeneous. When Si content reaches 2.1%, the comprehensive properties of 60Si2CrVA spring steel is the best.

Nondestructive Estimation of Fracture Toughness Using Instrumented Indentation Technique

2008 ◽  
Vol 385-387 ◽  
pp. 893-896
Author(s):  
Kyung Woo Lee ◽  
Hyun Uk Kim ◽  
Sang Wook Park ◽  
Jung Suk Lee ◽  
Kwang Ho Kim ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Damage Mechanics ◽  
Volume Fraction ◽  
Fracture Initiation ◽  
Continuum Damage Mechanics ◽  
Instrumented Indentation ◽  
Initiation Point ◽  
Indentation Technique ◽  
Proposed Model ◽  
Main Ideas

This study focused on the determination of fracture toughness by instrumented indentation technique. A theoretical model to estimate the fracture toughness of ductile materials is proposed and used to verify those results. Modeling of IIT to evaluate fracture toughness is based on two main ideas; the energy input up to characteristic fracture initiation point during indentation was correlated with material’s resistance to crack initiation and growth, and this characteristic fracture initiation point was determined by concepts of continuum damage mechanics. The estimated fracture toughness values obtained from the indentation technique showed good agreement with those from conventional fracture toughness tests based on CTOD. In addition, we confirmed that the proposed model can be also applied in the brittle material through modification of void volume fraction.

TSDT theory for free vibration of functionally graded plates with various material properties

2021 ◽  
Vol 8 (4) ◽  
pp. 691-704
Author(s):  
M. Janane Allah ◽  
◽  
Y. Belaasilia ◽  
A. Timesli ◽  
A. El Haouzi ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Implicit Algorithm ◽  
Proposed Model ◽  
Graded Material ◽  
Composite Modeling

In this work, an implicit algorithm is used for analyzing the free dynamic behavior of Functionally Graded Material (FGM) plates. The Third order Shear Deformation Theory (TSDT) is used to develop the proposed model. In this contribution, the formulation is written without any homogenization technique as the rule of mixture. The Hamilton principle is used to establish the resulting equations of motion. For spatial discretization based on Finite Element Method (FEM), a quadratic element with four and eight nodes is adopted using seven degrees of freedom per node. An implicit algorithm is used for solving the obtained problem. To study the accuracy and the performance of the proposed approach, we present comparisons with literature and laminate composite modeling results for vibration natural frequencies. Otherwise, we examine the influence of the exponent of the volume fraction which reacts the plates "P-FGM" and "S-FGM". In addition, we study the influence of the thickness on "E-FGM" plates.

Transformation Textures in Unstable Austenitic Steel

2002 ◽  
Vol 125 (1) ◽  
pp. 12-17 ◽  
Author(s):  
R. Kubler ◽  
M. Berveiller ◽  
M. Cherkaoui ◽  
K. Inal
Keyword(s):  
Martensitic Transformation ◽  
Volume Fraction ◽  
Micromechanical Model ◽  
Slip Rate ◽  
Transformation Strain ◽  
Dislocation Motion ◽  
Lattice Spin ◽  
Two Phases ◽  
The One ◽  
Elastic Plastic Materials

During the martensitic transformation in elastic-plastic materials, the local transformation strain as well as the plastic flow inside austenite are strongly related with the crystallographic orientation of the austenitic lattice. Two mechanisms involved in these materials, i.e., plasticity by dislocation motion and martensitic phase formation are coupled through kinematical constraints so that the lattice spin of the austenitic grains is different from the one due to classical slip. In this work, the lattice spin ω˙eA of the austenitic grains is related with the slip rate on the slip systems of the two phases, γ˙A and γ˙M, the evolution of the martensite volume fraction f˙ and the overall rotation rate Ω˙ of the grains. This new relation is integrated in a micromechanical model developed for unstable austenite in order to predict the evolution of the austenite texture during TRansformation Induced Plasticity (TRIP). Results for the evolution of the lattice orientation during martensitic transformation are compared with experimental data obtained by X-ray diffraction on a 304 AISI steel.

scholarly journals Experimental and Simulation Investigation of Bending Moment Effect on Hollow Columns of Multi-layers of Hybrid Materials

2019 ◽  
Vol 12 (1) ◽  
pp. 44-55
Author(s):  
Ayad A. Ramadhan
Keyword(s):  
Hybrid Materials ◽  
Volume Fraction ◽  
Load Capacity ◽  
Testing Machine ◽  
Bending Moment ◽  
Maximum Load ◽  
Experimental Procedure ◽  
Bending Load ◽  
Alumina Composite ◽  
Moment Effect

This paper presented the effect of bending on multi-layer of hollow columns of Hybrid materials (Carbon-Glass /epoxy-Alumina) composite this effect occurred and volume fraction of fibers. An experimental procedure was developed to study the performance of these effects under bending load using a hydraulic bending device type (MATEST. SRL) testing machine. This study has three forms through the selection of columns hollows width to thickness (a/b) (0.5, 1 and 2) with three types of layers of samples (2,4 and8) layers. The ultimate load of failure for each Hybrid/epoxy-Al2O3 had been determined and specified the optimum volume fraction (Vf) due to the effect of mixing 50% and 60% were low in the case for compared 55% volume fraction. To simulate this problem the researcher used Explicit Mesh for AUTODYN under ANSYS-15 software, it was found that maximum bending load for Hybrid/ Epoxy-Al2O3 Specimens, the maximum load of specimens increased with increasing number of layers from 2L to 8L. The results also identified that the maximum load capacity by 55% volume fraction and a/b=0.5 of all composite specimens was highest from the others types of (50% and 60%) volume fractions and (a/b=1 and a/b=2) .Also, the Increasing ratio of stress capacity for specimens have 4 to 2 layers (4/2)  and 8 to 4  (8/4) for experimental results have maximum value with increasing by 48.19%  and 46.84% at (Sp.4#8/Sp.2#4) and (Sp.8#6/Sp.4#6) respectively.

Sign in / Sign up

Export Citation Format

Share Document