scholarly journals Naturally-Derived Biphasic Calcium Phosphates through Increased Phosphorus-Based Reagent Amounts for Biomedical Applications

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 381 ◽  
Author(s):  
Aura-Cătălina Mocanu ◽  
George E. Stan ◽  
Andreea Maidaniuc ◽  
Marian Miculescu ◽  
Iulian Vasile Antoniac ◽  
...  
Keyword(s):  
Chemical Reaction ◽  
Biomedical Applications ◽  
Surface Characterization ◽  
Calcium Phosphates ◽  
Morphological Characterization ◽  
Great Promise ◽  
X Ray Diffraction ◽  
Sem Images ◽  
In Vitro Assessment

Calcium carbonate from marble and seashells is an eco-friendly, sustainable, and largely available bioresource for producing natural bone-like calcium phosphates (CaPs). Based on three main objectives, this research targeted the: (i) adaptation of an indirect synthesis route by modulating the amount of phosphorus used in the chemical reaction, (ii) comprehensive structural, morphological, and surface characterization, and (iii) biocompatibility assessment of the synthesized powdered samples. The morphological characterization was performed on digitally processed scanning electron microscopy (SEM) images. The complementary 3D image augmentation of SEM results also allowed the quantification of roughness parameters. The results revealed that both morphology and roughness were modulated through the induced variation of the synthesis parameters. Structural investigation of the samples was performed by Fourier transform infrared spectroscopy and X-ray diffraction. Depending on the phosphorus amount from the chemical reaction, the structural studies revealed the formation of biphasic CaPs based on hydroxyapatite/brushite or brushite/monetite. The in vitro assessment of the powdered samples demonstrated their capacity to support MC3T3-E1 pre-osteoblast viability and proliferation at comparable levels to the negative cytotoxicity control and the reference material (commercial hydroxyapatite). Therefore, these samples hold great promise for biomedical applications.

In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds

2016 ◽  
Vol 879 ◽  
pp. 2444-2449 ◽  
Author(s):  
Ekaterina Chudinova ◽  
Maria Surmeneva ◽  
Andrey Koptioug ◽  
Irina V. Savintseva ◽  
Irina Selezneva ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Human Mesenchymal Stem Cells ◽  
Nanocrystalline Structure ◽  
X Ray Diffraction ◽  
Ha Coating ◽  
Magnetron Sputter Deposition ◽  
In Vitro Assessment ◽  
Average Size

Custom orthopedic and dental implants may be fabricated by additive manufacturing (AM), for example using electron beam melting technology. This study is focused on the modification of the surface of Ti6Al4V alloy coin-like scaffolds fabricated via AM technology (EBM®) by radio frequency (RF) magnetron sputter deposition of hydroxyapatite (HA) coating. The scaffolds with HA coating were characterized by Scanning Electron microscopy, X-ray diffraction. HA coating showed a nanocrystalline structure with the crystallites of an average size of 32±9 nm. The ability of the surface to support adhesion and the proliferation of human mesenchymal stem cells was studied using biological short-term tests in vitro. In according to in vitro assessment, thin HA coating stimulated the attachment and proliferation of cells. Human mesenchymal stem cells cultured on the HA-coated scaffold also formed mineralized nodules.

scholarly journals Synthesis and characterization of nanostructured ceramics powders for biomedical applications

2007 ◽  
Vol 12 (4) ◽  
pp. 574-582 ◽  
Author(s):  
Nelson Heriberto de Almeida Camargo ◽  
O. J. Bellini ◽  
Enori Gemelli ◽  
M. Tomiyama
Keyword(s):  
Calcium Phosphate ◽  
Nanostructured Materials ◽  
Biomedical Applications ◽  
Calcium Phosphates ◽  
Morphological Characterization ◽  
Synthesis And Characterization ◽  
Powder Synthesis ◽  
Mineralogical Characteristics ◽  
Nanostructured Ceramics

Nanostructured materials have been largely studied in the last few years because they have a great potential to applications in different fields like physics, chemistry, biology, mechanic and medicine. Synthesis and characterization of nanostructured materials is a subject of great interest involving science, market, politicians, government and society. The nanostructured materials are in demand in biomedical area, mainly the bioceramics composed of calcium phosphates (Ca/P), which have an excellent biocompatibility and mineralogical characteristics similar to those of bones. The aim of this work was to optimize the method of powder synthesis of nanostructured calcium phosphate and of nanocomposites composed of calcium phosphate//SiO2n, containing 5, 10 and 15% (in volume) of nanometric silica (SiO2n). The results are expressed according to the method of synthesis, mineralogical and morphological characterization, and thermal behavior for the different compositions of the nanostructured powder synthesized.

scholarly journals Controlled Release of Ropivacaine from Single-Armed (1-PCL) and Four-Armed PCL (4-PCL) Microspheres

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Wei Xiong ◽  
Yue-kun Shen ◽  
Peng Dong ◽  
Ying Xiao ◽  
Xiong-qing Huang ◽  
...  
Keyword(s):  
Chronic Pain ◽  
Cell Proliferation ◽  
Mammalian Cells ◽  
Great Promise ◽  
X Ray Diffraction ◽  
X Ray ◽  
Initial Release ◽  
Release Assay ◽  
Ft Ir

Sustained release of anesthesia has shown great promise in the treatment of chronic pain in patients. In this research, we used neutralized ropivacaine as an anesthesia and poly(ε-caprolactone) (PCL) with different architectures to systematically study how these architectures affect the release of ropivacaine. After optimizing the parameters of the preparation of microspheres, ropivacaine-loaded 1-PCL microspheres and 4-PCL microspheres were obtained. Fourier Transform infrared spectra (FT-IR) and X-ray diffraction spectra (XRD) confirmed that ropivacaine was encapsulated within the microsphere rather than inserted on the surface of the microsphere. Ropivacaine was found to be buried deeper in the 1-PCL microsphere than in the 4-PCL microsphere. In vitro release assay revealed that small crystalline grains interfered with ropivacaine release in 4-PCL microspheres during the initial release period, but then two kinds of microspheres showed a similar ropivacaine release rate. We basically proved that the architecture of PCL has a negligible effect on ropivacaine release. Cell proliferation test revealed that the release of products from the microspheres resulted in insignificant toxicity towards mammalian cells.

In-vitro assessment of HA-Nb coating on Mg alloy ZK60 for biomedical applications

2019 ◽  
Vol 231 ◽  
pp. 138-149 ◽  
Author(s):  
Balraj Singh ◽  
Gurpreet Singh ◽  
Buta Singh Sidhu ◽  
Nitish Bhatia
Keyword(s):  
Biomedical Applications ◽  
Mg Alloy ◽  
In Vitro Assessment

scholarly journals Cuttlefish Bone-Derived Biphasic Calcium Phosphate Scaffolds Coated with Sol-Gel Derived Bioactive Glass

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2711
Author(s):  
Ana S. Neto ◽  
Daniela Brazete ◽  
José M.F. Ferreira
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Calcium Phosphates ◽  
Sol Gel ◽  
Biological Properties ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Hydrothermal Transformation

The combination of calcium phosphates with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. The initial CB structure was maintained after hydrothermal transformation (HT) and the scaffold functionalization did not jeopardize the internal structure. The results of the in-vitro bioactivity after immersing the BG coated scaffolds in simulated body fluid (SBF) for 15 days showed the formation of apatite on the surface of the scaffolds. Overall, the functionalized CB derived BCP scaffolds revealed promising properties, but further assessment of the in-vitro biological properties is needed before being considered for their use in bone tissue engineering applications.

scholarly journals Morphology andIn VitroBehavior of Electrospun Fibrous Poly(D,L-lactic acid) for Biomedical Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Toshihiro Inami ◽  
Yasuhiro Tanimoto ◽  
Masayuki Ueda ◽  
Yo Shibata ◽  
Satoshi Hirayama ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Biomedical Applications ◽  
Polymer Concentration ◽  
The Body ◽  
Solution Flow Rate ◽  
Apatite Formation ◽  
X Ray Diffraction ◽  
Solution Flow

This work describes the fabrication, optimization, and characterization of electrospun fibrous poly(D,L-lactic acid) (PDLLA) for biomedical applications. The influences of the polymer concentration of the electrospinning solution (5, 10, or 15 wt%) and the solution flow rate (0.1, 0.5, 1.0, or 2.0 mL/h) on the morphology of the obtained fibrous PDLLA were evaluated. Thein vitrobiocompatibility of two types of PDLLA, ester terminated PDLLA (PDLLA-R) and carboxyl terminated PDLLA (PDLLA-COOH), was evaluated by monitoring apatite formation on samples immersed in Hanks’ balanced salt (HBS) solution. 15 wt% polymer solution was the most beneficial for preparing a fibrous PDLLA structure. Meanwhile, no differences in morphology were observed for PDLLA prepared at various flow rates. Apatite precipitate is formed on both types of PDLLA only 1 day after immersion in HBS solution. After 7 days of immersion, PDLLA-COOH showed greater apatite formation ability compared with that of PDLLA-R, as measured by thin-film X-ray diffraction. The results indicated that the carboxyl group is effective for apatite precipitation in the body environment.

MPACVD Nanocrystalline Diamond for Biomedical Applications

2007 ◽  
Vol 280-283 ◽  
pp. 1595-1598 ◽  
Author(s):  
Chuan Lin Zheng ◽  
Rong Qi ◽  
Wu Bao Yang
Keyword(s):  
Biomedical Applications ◽  
Microwave Plasma ◽  
Optical Glass ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Processing Parameters ◽  
Nanocrystalline Diamond ◽  
X Ray Diffraction ◽  
Nanocrystalline Diamond Films

In the present paper, nanocrystalline diamond films (NDFs) were fabricated on optical glass using microwave plasma assisted chemical vapor deposition (MPACVD). The suitable processing parameters are as followings: methane concentration 3% in argon, total deposition pressure 13.3 kPa, substrate temperature 500 °C. The diamond films were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy. In vitro osteoblast cell cultures and platelet adhesion tests were applied to evaluate the biocompatibility of the nanocrystalline diamond films (NDFs). All results indicate that the diamond films exhibit better tissue compatibility and hemocompatibility which are very suitable for biomedical applications.

scholarly journals Composite Scaffolds Based on Silver Nanoparticles for Biomedical Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jenel Marian Patrascu ◽  
Ioan Avram Nedelcu ◽  
Maria Sonmez ◽  
Denisa Ficai ◽  
Anton Ficai ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Silver Nanoparticles ◽  
Composite Materials ◽  
Chemical Reaction ◽  
Biomedical Applications ◽  
Chemical Reduction ◽  
Composite Scaffolds ◽  
Sputtering Deposition ◽  
Plasma Sputtering

This paper presents the synthesis, characterisation, andin vitrotesting of homogenous and heterogeneous materials containing silver nanoparticles (nanoAg). Three types of antiseptic materials based on collagen (COLL), hydroxyapatite (HA), and collagen/hydroxyapatite (COLL/HA) composite materials were obtained. The synthesis of silver nanoparticles was realized by chemical reaction as well as plasma sputtering deposition. The use of chemical reduction allows the synthesis of homogenous materials while the plasma sputtering deposition can be easily used for the synthesis of homogeneous and heterogeneous support. Based on thein vitroassays clear antiseptic activity againstEscherichia coliwas relieved even at low content of nanoAg (10 ppm).

ANTIBACTERIAL AND BIOCOMPATIBILITY PROPERTIES OF NANO-SILVER/TITANIA THIN LAYER

2011 ◽  
Vol 25 (27) ◽  
pp. 3647-3653
Author(s):  
R. EMADI ◽  
K. RAEISSI
Keyword(s):  
Antibacterial Effect ◽  
In Vitro Test ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Spherical Structures ◽  
Vitro Test ◽  
And Staphylococcus Aureus ◽  
Electrodeposition Of Silver

Ag/TiO2coating was prepared by anodizing the surface of Ti followed by electrodeposition of silver. By X-ray diffraction (XRD) analyses, that indicated the crystalline size of Ag deposit onto the oxidized surface of Ti was around 32 nm. Scanning electron microscopy (SEM) images of the oxidized surface with and without Ag deposit show that TiO2is formed uniformly but Ag deposit consisted of numerous spherical structures. The Escherichia coli and Staphylococcus aureus bacteria were utilized to test the antibacterial effect of Ag/TiO2coating which showed more than 99% of bacteria were killed after 24 h incubation. The results of in vitro test showed Ag/TiO2coating is also biocompatible.

scholarly journals Biosynthesis of spinel nickel ferrite nanowhiskers and their biomedical applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hajar Q. Alijani ◽  
Siavash Iravani ◽  
Shahram Pourseyedi ◽  
Masoud Torkzadeh-Mahani ◽  
Mahmood Barani ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Nickel Ferrite ◽  
Biomedical Applications ◽  
Leishmania Major ◽  
X Ray Diffraction ◽  
Green Method ◽  
X Ray ◽  
Transmission Electron ◽  
Low Toxicity

AbstractGreener methods for the synthesis of various nanostructures with well-organized characteristics and biomedical applicability have demonstrated several advantages, including simplicity, low toxicity, cost-effectiveness, and eco-friendliness. Spinel nickel ferrite (NiFe2O4) nanowhiskers with rod-like structures were synthesized using a simple and green method; these nanostructures were evaluated by X-ray diffraction analysis, transmission electron microscopy, scanning electron microscopy, and X-ray energy diffraction spectroscopy. Additionally, the prepared nanowhiskers could significantly reduce the survival of Leishmania major promastigotes, at a concentration of 500 μg/mL; the survival of promastigotes was reduced to ≃ 26%. According to the results obtained from MTT test (in vitro), it can be proposed that further studies should be conducted to evaluate anti-leishmaniasis activity of these types of nanowhiskers in animal models.

Sign in / Sign up

Export Citation Format

Share Document