scholarly journals Pro-Degradant Activity of Naturally Occurring Compounds on Polyethylene in Accelerate Weathering Conditions

Materials ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 195 ◽  
Author(s):  
Nadka Tzankova Dintcheva ◽  
Delia Gennaro ◽  
Rosalia Teresi ◽  
Marilena Baiamonte

In this work, naturally occurring compounds, such as Vitamin E (VE) and Ferulic Acid (FA), at high concentrations, have been considered as pro-degradant agents for Low Density Polyethylene (PE). However, all obtained results using the naturally occurring molecules as pro-oxidant agents for PE have been compared with the results achieved using a classical pro-oxidant agent, such as calcium stearate (Ca stearate) and with neat PE. The preliminary characterization, through rheological, mechanical and thermal analysis, of the PE-based systems highlights that the used naturally occurring molecules are able to exert a slight plasticizing action on PE and subsequently the PE rigidity and crystallinity slightly decrease, while the ductility increases. To assess the pro-degradant activity of the considered naturally occurring compounds, thin films of neat PE and PE-based systems containing 2 and 3 wt.% Ca stearate, VE and FA have been produced and subjected to accelerated weathering upon UVB light exposure. All obtained results point out that the VE and FA, at these high concentrations, exert a clear pro-oxidant activity in PE and this pro-oxidant activity is very similar to that exerted by Ca stearate. Moreover, the VE and FA at high concentrations can be considered as suitable eco-friendly pro-degradant additives for PE, also in order to control the polyolefin degradation times.

2020 ◽  
Vol 221 (12) ◽  
pp. 2000095 ◽  
Author(s):  
PaulSeverin Eselem Bungu ◽  
Kristina Pflug ◽  
Harald Pasch

Recycling ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 33
Author(s):  
Bart Rimez ◽  
Sacha Breyer ◽  
Odile Vekemans ◽  
Benoit Haut

In this work, different thermal analysis methods have been used to study the co-pyrolysis of low-density polyethylene (LDPE) and motor oil. Two kinds of motor oil were considered, a fresh one and a used one. Through the comparison of experimental curves and so-called “theoretical curves”, high-resolution thermogravimetry experiments allowed highlighting interactions between the LDPE and each of the two oils, when they are co-pyrolyzed. While thermogravimetry coupled with mass spectrometry did not give any insights into these interactions, pyrolysis coupled to gaseous chromatograph and mass spectrometry allowed identifying aldehydes in the products of the co-pyrolysis of LDPE and each of the two oils. These aldehydes were not observed during the pyrolysis of the LDPE or the oils alone. On the basis of these results, various explanations for the formation of these aldehydes are proposed.


Crystals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1099
Author(s):  
Salem Mohammed Aldosari ◽  
Muhammad A. Khan ◽  
Sameer Rahatekar

A high modulus of elasticity is a distinctive feature of carbon fibres produced from mesophase pitch. In this work, we expand our previous study of pitch/linear low-density polyethylene blend fibres, increasing the concentration of the linear low-density polyethylene in the blend into the range of from 30 to 90 wt%. A scanning electron microscope study showed two distinct phases in the fibres: one linear low-density polyethylene, and the other pitch fibre. Unique morphologies of the blend were observed. They ranged from continuous microfibres of pitch embedded in linear low-density polyethylene (occurring at high concentrations of pitch) to a discontinuous region showing the presence of spherical pitch nodules (at high concentrations of linear low-density polyethylene). The corresponding mechanical properties—such as tensile strength, tensile modulus, and strain at failure—of different concentrations of linear low-density polyethylene in the pitch fibre were measured and are reported here. Thermogravimetric analysis was used to investigate how the increased linear low-density polyethylene content affected the thermal stability of linear low-density polyethylene/pitch fibres. It is shown that selecting appropriate linear low-density polyethylene concentrations is required, depending on the requirement of thermal stability and mechanical properties of the fibres. Our study offers new and useful guidance to the scientific community to help select the appropriate combinations of linear low-density polyethylene/pitch blend concentrations based on the required mechanical property and thermal stability of the fibres.


Sign in / Sign up

Export Citation Format

Share Document