scholarly journals Composite Film Based on Pulping Industry Waste and Chitosan for Food Packaging

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2264 ◽  
Author(s):  
Ji-Dong Xu ◽  
Ya-Shuai Niu ◽  
Pan-Pan Yue ◽  
Ya-Jie Hu ◽  
Jing Bian ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Oxygen Transfer ◽  
Transfer Rate ◽  
Food Packaging ◽  
Oxygen Transfer Rate ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Low Oxygen ◽  
Content Ratio

Wood auto-hydrolysates (WAH) are obtained in the pulping process by the hydrothermal extraction, which contains lots of hemicelluloses and slight lignin. WAH and chitosan (CS) were introduced into this study to construct WAH-based films by the casting method. The FT-IR results revealed the crosslinking interaction between WAH and CS due to the Millard reaction. The morphology, transmittance, thermal properties and mechanical properties of composite WAH/CS films were investigated. As the results showed, the tensile strength, light transmittances and thermal stability of the WAH-based composite films increased with the increment of WAH/CS content ratio. In addition, the results of oxygen transfer rate (OTR) and water vapor permeability (WVP) suggested that the OTR and WVP values of the films decreased due to the addition of CS. The maximum value of tensile strengths of the composite films achieved 71.2 MPa and the OTR of the films was low as 0.16 cm3·μm·m−2·24 h−1·kPa−1, these properties are better than those of other hemicelluloses composite films. These results suggested that the barrier composite films based on WAH and CS will become attractive in the food packaging application for great mechanical properties, good transmittance and low oxygen transfer rate.

scholarly journals Application of Solution Blow Spinning for Rapid Fabrication of Gelatin/Nylon 66 Nanofibrous Film

Foods ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2339
Author(s):  
Zhichao Yang ◽  
Chaoyi Shen ◽  
Yucheng Zou ◽  
Di Wu ◽  
Hui Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Composite Film ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Nylon 66 ◽  
Rapid Fabrication ◽  
Solution Blow Spinning

Gelatin (GA) is a natural protein widely used in food packaging, but its fabricated fibrous film has the defects of a high tendency to swell and inferior mechanical properties. In this work, a novel spinning technique, solution blow spinning (SBS), was used for the rapid fabrication of nanofiber materials; meanwhile, nylon 66 (PA66) was used to improve the mechanical properties and the ability to resist dissolution of gelatin films. Morphology observations show that GA/PA66 composite films had nano-diameter from 172.3 to 322.1 nm. Fourier transform infrared spectroscopy and X-ray indicate that GA and PA66 had strong interaction by hydrogen bonding. Mechanical tests show the elongation at break of the composite film increased substantially from 7.98% to 30.36%, and the tensile strength of the composite film increased from 0.03 MPa up to 1.42 MPa, which indicate that the composite films had the highest mechanical strength. Water vapor permeability analysis shows lower water vapor permeability of 9.93 g mm/m2 h kPa, indicates that GA/PA66 film’s water vapor barrier performance was improved. Solvent resistance analysis indicates that PA66 could effectively improve the ability of GA to resist dissolution. This work indicates that SBS has great promise for rapid preparation of nanofibrous film for food packaging, and PA66 can be applied to the modification of gelatin film.

scholarly journals Few-layer graphene aqueous suspensions for polyurethane composite coatings

MRS Advances ◽  
2016 ◽  
Vol 2 (1) ◽  
pp. 57-62 ◽  
Author(s):  
Eunice Cunha ◽  
Fernando Duarte ◽  
M. Fernanda Proença ◽  
M. Conceição Paiva
Keyword(s):  
Mechanical Properties ◽  
Tensile Testing ◽  
Composite Coatings ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Waterborne Polyurethane ◽  
Vapor Permeability ◽  
Layer Graphene ◽  
Polyurethane Composite ◽  
Few Layer Graphene

ABSTRACTGraphite nanoplates (GnP) have recently attracted attention as an economically viable alternative for the development of functional and structural nanocomposites. The incorporation of GnP into waterborne polyurethane (WPU) with loadings from 0.1 to 10 wt.% was studied. The mechanical properties of the composite films were assessed by tensile testing showing an increase of the Young’s modulus up to 48%. The electrical conductivity increased by 9 orders of magnitude and the water vapor permeability of the composite films decreased 57% for composites containing 5.0 wt.% of GnP.

Fabrication of Composite Films Based on Chitosan and Vegetable-Tanned Collagen Fibers Crosslinked with Genipin

2021 ◽  
Vol 116 (10) ◽  
Author(s):  
Jie Liu ◽  
Yanchun Liu ◽  
Eleanor M. Brown ◽  
Zhengxin Ma ◽  
Cheng-Kung Liu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Water Vapor ◽  
Composite Film ◽  
Composite Films ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Leather Industry ◽  
Compact Structure

The leather industry generates considerable amounts of solid waste and raises many environmental concerns during its disposal. The presence of collagen in these wastes provides a potential protein source for the fabrication of bio-based value-added products. Herein, a novel composite film was fabricated by incorporating vegetable-tanned collagen fiber (VCF), a mechanically ground powder-like leather waste, into a chitosan matrix and crosslinked with genipin. The obtained composite film showed a compact structure and the hydrogen bonding interactions were confirmed by FTIR analysis, indicating a good compatibility between chitosan and VCF. The optical properties, water absorption capacity, thermal stability, water vapor permeability and mechanical properties of the composite films were characterized. The incorporation of VCF into chitosan led to significant decreases in opacity and solubility of the films. At the same time, the mechanical properties, water vapor permeability and thermal stability of the films were improved. The composite film exhibited antibacterial activity against food-borne pathogens. Results from this research indicated the potential of the genipin-crosslinked chitosan/VCF composites for applications in antimicrobial packaging. 

Preparation and Characterization of Corn Starch-Nanodiamond Composite Films

2013 ◽  
Vol 469 ◽  
pp. 156-161 ◽  
Author(s):  
Hong Pan ◽  
Dan Xu ◽  
Qin Liu ◽  
Hui Qing Ren ◽  
Min Zhou
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Ft Ir ◽  
Loading Amount ◽  
Physical Blending

Starch-based nanocomposite films were fabricated by the incorporation of different amounts of nanodiamond (ND) particles. These films were characterized by SEM, FT-IR, TGA, tensile testing and water vapor permeability measurement. It was observed that at low loadings, ND dispersed well in starch matrix. However, as the loading amount increased, aggregates as large as several micrometers appeared. The physical blending of ND with starch didnt change the thermal degradation mechanisms of starch films, only increased the char residues. As the ND loading increased, the tensile strength of composite films increased but the elongation at break decreased. However, the water vapor permeability increased as the loading of ND increased due to the increased microspores in films. With further modifications, ND may be considered as a novel of biocompatible nanofillers for reinforcement of biopolymers for food packaging applications.

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

scholarly journals Physical Properties of Composite Films from Tilapia Skin Collagen with Pachyrhizus Starch and Rambutan Peel Phenolics

Marine Drugs ◽  
2019 ◽  
Vol 17 (12) ◽  
pp. 662
Author(s):  
Yongliang Zhuang ◽  
Shiyan Ruan ◽  
Hanghang Yao ◽  
Yun Sun
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Amorphous Structure ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Active Food Packaging ◽  
Skin Collagen

Different composite films composed of tilapia skin collagen (TSC) with Pachyrhizus starch (PS) or rambutan peel phenolics (RPP) were prepared, and the physical properties of these films were determined. The effects of PS and RPP on TSC films were investigated, and our results indicated that PS and RPP could improve the physical properties of TSC films. Opacity and film thickness showed an enhanced trend with increasing PS and RPP contents in TSC films, whereas solubility in water, elongation-at-break (EAB), and water vapor permeability (WVP) showed declining trends. TSC film with 10% PS and 0.5% RPP had the highest tensile strength, and the tensile strength dropped drastically when the content of PS and RPP increased. The light transmittances of the films could decrease with the incorporation of PS and RPP. Differential scanning calorimetry (DSC) demonstrated that the addition of PS and RPP improved the thermal stability of TSC films. In addition, X-ray diffraction indicated that the crystallinity of the films decreased and the amorphous structure of the films tended to become more complex with the addition of PS and RPP. As shown by fourier transform infrared spectroscopy (FTIR) analysis, PS and RPP can strongly interact with TSC, resulting in a modification of its structure. Scanning electron microscope (SEM) analysis showed that there was a good compatibility between TSC, PS, and RPP. The results indicated that TSC film incorporated with 10% PS and 0.5% RPP was an effective method for improve the physical properties of the film. TSC–PS–RPP composite films can be used not only in biomedical applications, but also as active food packaging materials.

scholarly journals Active Biodegradable Polyvinyl Alcohol–Hemicellulose/Tea Polyphenol Films with Excellent Moisture Resistance Prepared via Ultrasound Assistance for Food Packaging

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 219
Author(s):  
Yining Wang ◽  
Jinhui Li ◽  
Xin Guo ◽  
Haisong Wang ◽  
Fang Qian ◽  
...  
Keyword(s):  
Water Vapor ◽  
High Performance ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Poly Vinyl Alcohol ◽  
Vapor Permeability ◽  
Moisture Resistance ◽  
Film Material ◽  
Strength Performance

Poor water-vapor barriers and mechanical properties are common problems of biobased films. To maintain food quality, the barrier and its strength performance need to be improved. Tea polyphenols (TP) are a natural active substance, and their benzene ring structure provides a barrier for them as a film material. Films that incorporate TP also have enriched functionalities, e.g., as antioxidants. Here, active poly (vinyl alcohol) (PVA)-hemicellulose (HC)/TP films with good moisture resistance and antioxidant capacity were prepared via ultrasound assistance. The effects of TP incorporation and ultrasonication on the physical, antioxidant, and micromorphological properties of the films were investigated. Results showed that the addition of TP improved the thermal stability and water-vapor permeability (WVP) of the composite films. When a PVA-HC/TP composite film with a PVA-HC to TP mass ratio of 100:10 was treated with ultrasonication for 45 min, tensile strength was 25.61 Mpa, which was increased by 54% from the film without any treatment, and water-vapor permeability (WVP) value declined from 49% to 4.29 × 10−12 g·cm/cm2·s·Pa. More importantly, the films’ DPPH scavenging activity increased to the maximal levels of 85.45%. In short, these observations create a feasible strategy for preparing high-performance biodegradable active-packaging films.

scholarly journals The metabolic switch can be activated in a recombinant strain of Streptomyces lividans by a low oxygen transfer rate in shake flasks

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
Ramsés A. Gamboa-Suasnavart ◽  
Norma A. Valdez-Cruz ◽  
Gerardo Gaytan-Ortega ◽  
Greta I. Reynoso-Cereceda ◽  
Daniel Cabrera-Santos ◽  
...  
Keyword(s):  
Oxygen Transfer ◽  
Transfer Rate ◽  
Recombinant Strain ◽  
Oxygen Transfer Rate ◽  
Streptomyces Lividans ◽  
Low Oxygen ◽  
Metabolic Switch ◽  
Shake Flasks

scholarly journals Development of seaweed-based bamboo microcrystalline cellulose films intended for sustainable food packaging applications

BioResources ◽  
2019 ◽  
Vol 14 (2) ◽  
pp. 3389-3410 ◽  
Author(s):  
D. Hermawan ◽  
Tze Kiat Lai ◽  
Shima Jafarzadeh ◽  
Deepu A. Gopakumar ◽  
Hasan M. ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Food Packaging ◽  
Water Solubility ◽  
Moisture Absorption ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Absorption Capacity ◽  
Vapor Permeability ◽  
Sustainable Food ◽  
Cellulose Films

Seaweed bio-composite films with different proportion of Lemang and Semantan bamboo microcrystalline cellulose (MCC) were fabricated via solvent casting. The seaweed/MCC composite films were flexible, transparent, and slightly yellow. The MCC particles further enhanced mechanical properties and opacity of films. The thermal stability of seaweed films was moderately improved upon addition of bamboo MCC particles. Bamboo MCC was found to be comparable to commercial MCC in reducing the water vapor permeability (WVP), water solubility (WS), and moisture absorption capacity (MSC) of seaweed films. The tensile strength (TS) of seaweed films was increased by 20 to 23% with addition of up to 5% MCC particles. In addition, bamboo MCC efficiently reduced the WVP of seaweed films comparable to commercial MCC particles. The WS of seaweed films was decreased by 10 to 19% with addition of 1% MCC particles loading. Lemang bamboo MCC (SB-MCC) was remarkably reduced the moisture absorption capacity (MAC) of films up to 25% with inclusion of only 1% MCC. Morphological analysis via Scanning Electron Microscopy (SEM) confirmed that there was homogeneous dispersion of MCC particles in the films. MCC particles improved the mechanical, thermal, and optical properties of seaweed films making them more suitable for food packaging applications.

scholarly journals Preparation, Properties and Mechanism of Anionic and Cationic CNC/WPU Composite Films

2021 ◽  
Author(s):  
Ya-Yu Li ◽  
Yan-Ru Bai ◽  
Xin-Qian Zhang ◽  
Xin Liu ◽  
Zhen Dai ◽  
...  
Keyword(s):  
Composite Film ◽  
Food Packaging ◽  
Composite Films ◽  
Interaction Mechanism ◽  
Water Vapor Permeability ◽  
Waterborne Polyurethane ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Light Transmittance ◽  
Vapor Permeability

Abstract Three kinds of cellulose nanocrystals (CNCs) were added into waterborne polyurethane (WPU), and nanocomposite films were prepared by solution casting method. The influence of different ionic function groups on microstructure and properties of composite films was investigated, and interaction mechanism between these two components was analyzed. Results show that thermal stability of these composite films are improved by 15℃. Compared with sulfated CNCs （SCNCs） and TEMPO oxidized CNCs (TOCNCs), FE-SEM results prove that cationized CNCs (CaCNCs) have better dispersion in composite films. In addition, fracture surface did not display large cavities, which indicates the interface binding force between WPU and CaCNCs is stronger. The tensile strength and fracture work of CaCNC/WPU composite film increase by 11.9% and by 8.4%, respectively. The oxygen permeability of CaCNC/WPU composite film is the lowest in these composite films, which is 5.00 cm3•cm (cm2•s•Pa)-1. Water vapor permeability of composite films may have a close positive correlation with their hygroscopicity. In all, composite film with CaCNCs has optimal strength, toughness, light transmittance and oxygen barrier properties. There may be opposite ion attraction superimposed hydrogen bond between CaCNCs and WPU in the composite film. The composite films are expected to have applications in food packaging, furniture coatings and biomedical applications.

Sign in / Sign up

Export Citation Format

Share Document