scholarly journals Comparison of Microstructure and Properties of In-Situ TiN- and WC-Reinforced NiCrBSi Composite Coatings Prepared by Plasma Spraying

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2182 ◽  
Author(s):  
Linlin Zhu ◽  
Jing Wang ◽  
Xianqiang Deng ◽  
Yanchun Dong ◽  
Yong Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Plasma Spraying ◽  
Composite Coatings ◽  
Wear Volume ◽  
Volume Loss ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
The Matrix ◽  
Comparison Object

In this study, NiCrBSi-30 wt.% TiN composite (NTC) coating was produced on carbon steel via plasma spraying, with NiCrBSi-30 wt.% WC composite (NWC) coating as the comparison object. The microstructure and phase constituents of the composite coatings were characterized using scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) techniques, transmission electron microscopy (TEM) and x-ray diffraction (XRD). Atomic force microscopy (AFM) was used to measure electronic work functions. The microhardness and wear performance of coatings were also investigated. The average microhardness of the NTC and NWC coatings was 1000 HV and 850 HV, respectively. In addition, the NTC coating had a wear volume loss of 0.8118 mm3, less than 1.4772 mm3, the volume loss of the NWC coating. This was due to the presence of TiN in the form of nanograins in the composite coating and tighter binding to the matrix.

Development and characterization of novel polybutylene nanocomposites

2016 ◽  
Vol 51 (1) ◽  
pp. 95-108 ◽  
Author(s):  
Khaled Alfadhel ◽  
Adam Al-Mulla ◽  
Bader Al-Busairi
Keyword(s):  
Electron Microscopy ◽  
Tensile Strength ◽  
Initial Period ◽  
Mechanical Analysis ◽  
X Ray Diffraction ◽  
Elongation At Break ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
The Matrix

Polybutylene/starch/nanoclay composite blends were prepared by melt extrusion technique. Maleic anhydride grafted polybutylene was used as a compatibilizer. The nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, rheological, and mechanical analysis. Addition of compatibilizer to the polybutylene/starch/nanoclay showed dispersion and nucleation related to the nanoclay in the polybutylene matrix. An increase in the mechanical properties like modulus and tensile strength at break and a decrease in the elongation at break were observed on the addition of compatibilizer to the matrix compared to that of uncompatibilized matrix. The biodegradability of the nanocomposites was studied using the landfill burial test. The blends subjected to the burial test were evaluated for their tensile properties. The results revealed that the tensile strength and elongation at break of the compatibilized nanocomposites decreased after 80 days of land burial test compared to the initial period.

Defect-Engineered Graded GexSi1-x Buffers on Si (001) with Extreme Low Threading Dislocation Density

1995 ◽  
Vol 378 ◽  
Author(s):  
G. Kissinger ◽  
T. Morgenstern ◽  
G. Morgenstern ◽  
H. B. Erzgräber ◽  
H. Richter
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Dislocation Density ◽  
Threading Dislocation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Dislocation Densities ◽  
Threading Dislocation Density

AbstractStepwise equilibrated graded GexSii-x (x≤0.2) buffers with threading dislocation densities between 102 and 103 cm−2 on the whole area of 4 inch silicon wafers were grown and studied by transmission electron microscopy, defect etching, atomic force microscopy and photoluminescence spectroscopy.

Effectiveness and Reliability of Metal Diffusion Barriers for Copper Interconnects

1995 ◽  
Vol 403 ◽  
Author(s):  
G. Bai ◽  
S. Wittenbrock ◽  
V. Ochoa ◽  
R. Villasol ◽  
C. Chiang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Chemical Vapor ◽  
Diffusion Barriers ◽  
Copper Interconnects ◽  
Time To Failure ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

AbstractCu has two advantages over Al for sub-quarter micron interconnect application: (1) higher conductivity and (2) improved electromigration reliability. However, Cu diffuses quickly in SiO2and Si, and must be encapsulated. Polycrystalline films of Physical Vapor Deposition (PVD) Ta, W, Mo, TiN, and Metal-Organo Chemical Vapor Deposition (MOCVD) TiN and Ti-Si-N have been evaluated as Cu diffusion barriers using electrically biased-thermal-stressing tests. Barrier effectiveness of these thin films were correlated with their physical properties from Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM), Secondary Electron Microscopy (SEM), and Auger Electron Spectroscopy (AES) analysis. The barrier failure is dominated by “micro-defects” in the barrier film that serve as easy pathways for Cu diffusion. An ideal barrier system should be free of such micro-defects (e.g., amorphous Ti-Si-N and annealed Ta). The median-time-to-failure (MTTF) of a Ta barrier (30 nm) has been measured at different bias electrical fields and stressing temperatures, and the extrapolated MTTF of such a barrier is > 100 year at an operating condition of 200C and 0.1 MV/cm.

Development of Ge Nanoparticles Embedded in GeO2 Matrix

2008 ◽  
Vol 8 (8) ◽  
pp. 4081-4085 ◽  
Author(s):  
Y. Batra ◽  
D. Kabiraj ◽  
D. Kanjilal
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Spectroscopic Studies ◽  
Electron Beam Evaporation ◽  
Granular Structure ◽  
Raman Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Ge Nanocrystals

Germanium (Ge) nanoparticles have attracted a lot of attention due to their excellent optical properties. In this paper, we report on the formation of Ge nanoparticles embedded in GeO2 matrix prepared by electron beam evaporation and subsequent annealing. Transmission electron microscopy (TEM) studies clearly indicate the formation of Ge nanocrystals in the films annealed at 500 °C. Fourier transform infrared (FTIR) spectroscopic studies are carried out to verify the evolution of the structure after annealingat each stage. Micro-Raman analysis also confirms the formation of Ge nanoparticles in the annealed films. Development of Ge nanoparticles is also established by photoluminescence (PL) analysis. Surface morphology study is carried out by atomic force microscopy (AFM). It shows the evolution of granular structure of the films with increasing annealing temperature.

scholarly journals Measuring the Autocorrelation Function of Nanoscale Three-Dimensional Density Distribution in Individual Cells Using Scanning Transmission Electron Microscopy, Atomic Force Microscopy, and a New Deconvolution Algorithm

2017 ◽  
Vol 23 (3) ◽  
pp. 661-667 ◽  
Author(s):  
Yue Li ◽  
Di Zhang ◽  
Ilker Capoglu ◽  
Karl A. Hujsak ◽  
Dhwanil Damania ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Density Distribution ◽  
Scanning Transmission Electron Microscopy ◽  
Mass Density ◽  
Three Dimensional ◽  
Force Microscopy ◽  
Statistical Measures ◽  
Atomic Force ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractEssentially all biological processes are highly dependent on the nanoscale architecture of the cellular components where these processes take place. Statistical measures, such as the autocorrelation function (ACF) of the three-dimensional (3D) mass–density distribution, are widely used to characterize cellular nanostructure. However, conventional methods of reconstruction of the deterministic 3D mass–density distribution, from which these statistical measures can be calculated, have been inadequate for thick biological structures, such as whole cells, due to the conflict between the need for nanoscale resolution and its inverse relationship with thickness after conventional tomographic reconstruction. To tackle the problem, we have developed a robust method to calculate the ACF of the 3D mass–density distribution without tomography. Assuming the biological mass distribution is isotropic, our method allows for accurate statistical characterization of the 3D mass–density distribution by ACF with two data sets: a single projection image by scanning transmission electron microscopy and a thickness map by atomic force microscopy. Here we present validation of the ACF reconstruction algorithm, as well as its application to calculate the statistics of the 3D distribution of mass–density in a region containing the nucleus of an entire mammalian cell. This method may provide important insights into architectural changes that accompany cellular processes.

scholarly journals Spore Coat Architecture of Clostridium novyi NT Spores

2007 ◽  
Vol 189 (17) ◽  
pp. 6457-6468 ◽  
Author(s):  
Marco Plomp ◽  
J. Michael McCaffery ◽  
Ian Cheong ◽  
Xin Huang ◽  
Chetan Bettegowda ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Anaerobic Bacterium ◽  
Amorphous Layer ◽  
Spore Coat ◽  
Experimental Animals ◽  
Force Microscopy ◽  
Atomic Force ◽  
Clostridium Novyi ◽  
Transmission Electron

ABSTRACT Spores of the anaerobic bacterium Clostridium novyi NT are able to germinate in and destroy hypoxic regions of tumors in experimental animals. Future progress in this area will benefit from a better understanding of the germination and outgrowth processes that are essential for the tumorilytic properties of these spores. Toward this end, we have used both transmission electron microscopy and atomic force microscopy to determine the structure of both dormant and germinating spores. We found that the spores are surrounded by an amorphous layer intertwined with honeycomb parasporal layers. Moreover, the spore coat layers had apparently self-assembled, and this assembly was likely to be governed by crystal growth principles. During germination and outgrowth, the honeycomb layers, as well as the underlying spore coat and undercoat layers, sequentially dissolved until the vegetative cell was released. In addition to their implications for understanding the biology of C. novyi NT, these studies document the presence of proteinaceous growth spirals in a biological organism.

Sign in / Sign up

Export Citation Format

Share Document