scholarly journals Effect of Selective Laser Melting Process Parameters on Microstructure and Properties of Co-Cr Alloy

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1546 ◽  
Author(s):  
Jian-Hong Wang ◽  
Jie Ren ◽  
Wei Liu ◽  
Xiao-Yu Wu ◽  
Ming-Xiang Gao ◽  
...  
Keyword(s):  
Selective Laser Melting ◽  
Process Parameters ◽  
Molten Pool ◽  
Laser Energy ◽  
Melting Process ◽  
Chromium Alloy ◽  
Cobalt Chromium ◽  
Laser Melting ◽  
The Relationship ◽  
Cobalt Chromium Alloy

Due to the rapid melting and solidification mechanisms involved in selective laser melting (SLM), CoCrMo alloys fabricated by SLM differ from the cast form of the same alloy. In this study, the relationship between process parameters and the morphology and macromechanical properties of cobalt-chromium alloy micro-melting pools is discussed. By measuring the width and depth of the molten pool, a theoretical model of the molten pool is established, and the relationship between the laser power, the scanning speed, the scanning line spacing, and the morphology of the molten pool is determined. At the same time, this study discusses the relationship between laser energy and molding rate. Based on the above research, the optimal process for the laser melting of cobalt-chromium alloy in the selected area is obtained. These results will contribute to the development of biomedical CoCr alloys manufactured by SLM.

Study on Selective Laser Melting Forming Process of Cobalt Chromium Alloy

2015 ◽  
Vol 42 (5) ◽  
pp. 0503001
Author(s):  
刘威 Liu Wei ◽  
刘婷婷 Liu Tingting ◽  
廖文和 Liao Wenhe ◽  
蒋立异 Jiang Liyi
Keyword(s):  
Selective Laser Melting ◽  
Chromium Alloy ◽  
Cobalt Chromium ◽  
Laser Melting ◽  
Forming Process ◽  
Cobalt Chromium Alloy

Selective Laser Melting Forming Hardness Rule of Cobalt Chromium Alloy and its Prediction Model

2016 ◽  
Vol 43 (3) ◽  
pp. 0303007
Author(s):  
刘婷婷 Liu Tingting ◽  
廖文和 Liao Wenhe ◽  
张凯 Zhang Kai ◽  
刘威 Liu Wei
Keyword(s):  
Prediction Model ◽  
Selective Laser Melting ◽  
Chromium Alloy ◽  
Cobalt Chromium ◽  
Laser Melting ◽  
Cobalt Chromium Alloy

Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet

2020 ◽  
Vol 46 (18) ◽  
pp. 28749-28757 ◽  
Author(s):  
Atefeh Aramian ◽  
Zohreh Sadeghian ◽  
Seyed Mohammad Javad Razavi ◽  
Konda Gokuldoss Prashanth ◽  
Filippo Berto
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Melting Process ◽  
Laser Melting ◽  
Selective Laser Melting Process

scholarly journals The Influence of Process Parameters and Scanning Strategy on Lower Surface Quality of TA15 Parts Fabricated by Selective Laser Melting

Metals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1228
Author(s):  
Junjie Jiang ◽  
Jianming Chen ◽  
Zhihao Ren ◽  
Zhongfa Mao ◽  
Xiangyu Ma ◽  
...  
Keyword(s):  
Surface Quality ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Flexible Manufacturing ◽  
Molten Pool ◽  
Lower Surface ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Influence Of Process Parameters

With superior flexible manufacturing capability, selective laser melting (SLM) has attracted more and more attention in the aerospace, medical, and automotive industries. However, the poor quality of the lower surface in overhanging structures is still one of the factors that limits the wide application of SLM. In this work, the influence of process parameters and scanning strategy on the lower surface quality of SLMed TA15 (Ti-6Al-2Zr-1Mo-1V) titanium alloy parts were studied. The results showed that the laser surface energy density (EF) had a significant influence on the quality of the lower surface. Excessive EF led to obvious sinking of the molten pool and a serious slag hanging phenomenon. However, the too low EF easily contributed to the insufficient powder fusion in the lower surface area, which led to the agglomeration of a molten pool during core processing, resulting in slag hanging, pores, and powder spalling that reduced the quality of the lower surface. Moreover, the cross-remelting strategy and non-remelting strategy gained better surface quality at the low EF and high EF, respectively. In addition, it was found that the quality of the lower surface could be quickly and accurately evaluated by the cooling time of the molten pool during the processing of the lower surface. This research can increase the understanding of the forming mechanism of the lower surface and has certain guiding significance for the process optimization of the lower surface.

Sign in / Sign up

Export Citation Format

Share Document