scholarly journals Synthesis and Characterizations of (CoxMg(2−x))SiO4 Forsterite Ceramic Pigments from Mirror Waste

Materials ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1210 ◽  
Author(s):  
Niti Yongvanich ◽  
Kullada Supanichwatin ◽  
Jitat Penglan ◽  
Narit Triamnak
Keyword(s):  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Ceramic Powder ◽  
Color Space ◽  
Raw Material ◽  
Color Measurement ◽  
Ceramic Pigments ◽  
Conventional Solid State Reaction ◽  
X Ray ◽  
Co Doped

Ceramic pigments have been widely used in a variety of industries because of their excellent properties, such as high thermal stability, low-cost productions, and simple manufacturing processes. Re-use of mirror waste, which consists of silicon dioxide greater than 70%, is a method that can reduce raw materials cost. In this work, ceramic pigment with forsterite structure, Mg2SiO4, was synthesized via conventional solid state reaction by using mirror waste as a precursor. Solid solutions of Co-doped forsterite pigment, CoxMg(2−x)SiO4 where x = 0.02–1.6, were calcined at 1000 °C for 2 h. The calcined powders were characterized by X-ray diffraction technique (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis spectrophotometer, and color measurement (CIEL*a*b*). XRD results confirmed that forsterite phase was found as a main phase in the ceramic powder. However, the forsterite phase decreased with increased concentration of Co to x = 0.8–1.6. This could be because of the solubility limit of Co in solid solution. In addition, the use of mirror waste as a raw material was able to reduce calcination temperature compared to the use of oxide reagents. Color measurements or CIEL*a*b* color space of forsterite pigments were located in red-blue quadrant for Co-doped pigment.

scholarly journals Synthesis of coloured ceramic pigments by using chromite and manganese ores mixtures

Cerâmica ◽  
2010 ◽  
Vol 56 (338) ◽  
pp. 156-161 ◽  
Author(s):  
M. H Aly ◽  
I. S Ismael ◽  
F Bondioli
Keyword(s):  
Manganese Oxide ◽  
Spinel Structure ◽  
Raw Materials ◽  
Raw Material ◽  
Superior Performance ◽  
Spinel Solid Solution ◽  
Ceramic Pigments ◽  
X Ray ◽  
Manganese Ores ◽  
Colour Measurements

The aim of this work is not only the synthesis of black ceramic pigment with spinel structure using local and inexpensive minerals (chromite and manganese ores) but also throw some light on the relations between the structure and the colour of obtained pigment. Ultimate utilization spinel solid solution in ceramic materials is mostly due to their structure characteristics, their thermal and chemical stability. In this study colour pigments were ned by calcinations at 1250 ºC starting from a mixture of chromite and manganese oxide. Different compositions were tested containing 30, 40 and 50 wt.% of manganese oxide (low and high content respectively). The phase composition and microstructure characterization of both raw material and obtained pigments were evaluated by X-ray diffraction, X-ray fluorescence, polarizing microscope and scanning electron microscope. Furthermore, the colour measurements of the obtained pigments and tiles were evaluated. Composition of all pigments reveal the spinel structure with Cr2FeO4; hematite was also recorded in the mixture of low manganese. The degree of lightness is relatively same in the pigments mixtures of both manganese types. However, tiles could be considered lightness compared with its pigments, especially of the high manganese type. The solid state calcinations reactions are indeed able to form intense brown pigments that can be used as a stain for industrial ceramic applications. The production of less expensive black ceramic pigments from low cost and less pure raw materials that can be utilized in Egypt to substitute for the imported pure oxides or salts is proved superior performance for producing painted pigments.

scholarly journals Study on Adsorption Properties of Modified Corn Cob Activated Carbon for Mercury Ion

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4483
Author(s):  
Yuyingnan Liu ◽  
Xinrui Xu ◽  
Bin Qu ◽  
Xiaofeng Liu ◽  
Weiming Yi ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Physical Adsorption ◽  
Raw Material ◽  
Order Kinetic ◽  
Mercury Ions ◽  
Corn Cob ◽  
Adsorption Time ◽  
X Ray

In this study, corn cob was used as raw material and modified methods employing KOH and KMnO4 were used to prepare activated carbon with high adsorption capacity for mercury ions. Experiments on the effects of different influencing factors on the adsorption of mercury ions were undertaken. The results showed that when modified with KOH, the optimal adsorption time was 120 min, the optimum pH was 4; when modified with KMnO4, the optimal adsorption time was 60 min, the optimal pH was 3, and the optimal amount of adsorbent and the initial concentration were both 0.40 g/L and 100 mg/L under both modified conditions. The adsorption process conforms to the pseudo-second-order kinetic model and Langmuir model. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and Zeta potential characterization results showed that the adsorption process is mainly physical adsorption, surface complexation and ion exchange.

scholarly journals Preparation and Characterization of Visible-Light-Activated Fe-N Co-Doped TiO2and Its Photocatalytic Inactivation Effect on Leukemia Tumors

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Kangqiang Huang ◽  
Li Chen ◽  
Jianwen Xiong ◽  
Meixiang Liao
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Light Therapy ◽  
Cell Counting ◽  
Visible Absorption ◽  
X Ray ◽  
Photocatalytic Inactivation ◽  
Inactivation Efficiency ◽  
Co Doped

The Fe-N co-doped TiO2nanocomposites were synthesized by a sol-gel method and characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-vis) and X-ray photoelectron spectroscopy (XPS). Then the photocatalytic inactivation of Fe-N-doped TiO2on leukemia tumors was investigated by using Cell Counting Kit-8 (CCK-8) assay. Additionally, the ultrastructural morphology and apoptotic percentage of treated cells were also studied. The experimental results showed that the growth of leukemic HL60 cells was significantly inhibited in groups treated with TiO2nanoparticles and the photocatalytic activity of Fe-N-TiO2was significantly higher than that of Fe-TiO2and N-TiO2, indicating that the photocatalytic efficiency could be effectively enhanced by the modification of Fe-N. Furthermore, when 2 wt% Fe-N-TiO2nanocomposites at a final concentration of 200 μg/mL were used, the inactivation efficiency of 78.5% was achieved after 30-minute light therapy.

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

Preparation of Novel Ag–Si–TiO2 Composite and Research on Its Photocatalytic Degradation of Formaldehyde

2021 ◽  
Vol 13 (3) ◽  
pp. 371-380
Author(s):  
Yongjun Wu ◽  
Nina Xie ◽  
Lu Yu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Removal Rate ◽  
Sol Gel ◽  
Catalytic Performance ◽  
Formaldehyde Concentration ◽  
Order Kinetic ◽  
Solution Ph ◽  
Visible Absorption ◽  
X Ray ◽  
Co Doped

A novel Ag–Si–TiO2 composite was prepared via sol–gel method for removing residual formaldehyde in shiitake mushroom. The structure of Ag–Si–TiO2 composite was characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. Ultraviolet-visible absorption spectroscopy (UV-Vis) and N2 adsorption-desorption tests showed that Ag and Si co-doped decreased the band gap, the Brunauer-Emmett-Teller (BET) specific surface area of the samples increased and the recombination probability of electron-hole pairs (e--h+) reduced. Effect on removal rate of formaldehyde with different Ag-Si co-doped content, formaldehyde concentration and solution pH were investigated, and the results showed that 6.0 wt%Ag-3.0 wt%Si-TiO2 samples had an optimum catalytic performance, and the degradation efficiency reached 96.6% after 40 W 365 nm UV lamp irradiation for 360 min. The kinetics of formaldehyde degradation by Ag–Si–TiO2 composite photocatalyst could be described by Langmuir-Hinshelwood first-order kinetic model.

Deposition of gold nanoparticles on organo-kaolinite — Application in electrocatalysis for carbon monoxide oxidation

2011 ◽  
Vol 89 (7) ◽  
pp. 845-853 ◽  
Author(s):  
Sadok Letaief ◽  
Wendy Pell ◽  
Christian Detellier
Keyword(s):  
Carbon Monoxide ◽  
Gold Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Fine Particles ◽  
Raw Materials ◽  
Carbon Monoxide Oxidation ◽  
Functional Materials ◽  
Metallic State ◽  
Oxidation Reactions ◽  
X Ray

The clay mineral kaolinite was used as support of gold nanoparticles for heterogeneous catalysis of oxidation reactions, particularly of carbon monoxide oxidation. The application of clay minerals in the preparation of new functional materials provides an alternative approach for the use of these abundant raw materials. To improve the physicochemical properties of kaolinite, as well as to ensure a strong immobilization of the adsorbed species, kaolinite was functionalized by grafting 2-amino-2-methyl-1,3-propanediol on the internal and external surfaces of the octahedral sheets by reaction with the aluminol groups. Gold nanoparticles were then deposited on the external surfaces of the fine particles of the functionalized kaolinite. The resulting gold kaolinite nanohybrid material was characterized by various physicochemical techniques. X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectrometry confirmed that gold was effectively reduced to the metallic state during adsorption onto the external surfaces of the modified kaolinite. The gold nanoparticles have a narrow size distribution: more than 88% are less than 4 nm in diameter. Gold nanoparticles deposited on kaolinite catalyze the electro-oxidation of carbon monoxide in alkaline solution at room temperature.

Preparation of C, N and P co-doped TiO2 and its photocatalytic activity under visible light

2019 ◽  
Vol 12 (04) ◽  
pp. 1950045 ◽  
Author(s):  
Lin Zhao ◽  
Yanzhao Xie ◽  
Qiuyu Lin ◽  
Rongze Zheng ◽  
Yong Diao
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Soluble Starch ◽  
Doping Amount ◽  
X Ray ◽  
Composite Catalysts ◽  
One Step ◽  
Co Doped

A series of composite catalysts of C, N and P co-doped TiO2 were prepared by sol-gel method, using a biomass (soluble starch) dopant. The samples were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), fourier transform infrared (FTIR) spectroscopy. The results show that TiO2 is co-doped with C, N and P by one step. The resulting composite exhibited higher specific surface area, wider visible-light absorption band with respect to the pure TiO2. The sample calcined at 400∘C for 2[Formula: see text]h with a doping amount of 6[Formula: see text]g soluble starch showed the best electrochemical performance. The C, N and P co-doped TiO2 was also used for the degradation of methylene blue (MB) and degradation ratio was up to 98% in 80[Formula: see text]min under visible light irradiation.

Low-Cost Synthesis and Morphology Control of Magnesium Oxysulfate Hydrate Whiskers

2014 ◽  
Vol 936 ◽  
pp. 986-991
Author(s):  
Chuan Hui Gao ◽  
Li Ding ◽  
Yu Min Wu ◽  
Chuan Xing Wang ◽  
Jun Xu
Keyword(s):  
Electron Microscope ◽  
Raw Materials ◽  
Low Cost ◽  
Hydrothermal Process ◽  
Control Agent ◽  
Raw Material ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Magnesium Oxysulfate

A low-cost raw material, bittern obtained from the production process of sea salt, was used to prepare magnesium oxysulfate hydrate (MgSO4·5Mg (OH)2·2H2O, abbreviated as 152MOS) whiskers via hydrothermal synthesis with ammonia and magnesium sulfate as the other starting raw materials. The bittern was firstly filtered and then used directly without de-coloring. X-ray powder diffraction (XRD), transmission electron microscope (TEM), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) were employed to investigate the composition and morphology of the products. It was found that the 152MOS whiskers synthesized from bittern at 190°C for 3 hours exhibited fanlike morphology. The formation of the fanlike whiskers was inhibited and most of the whiskers presented as single fibers when ethanol was used as crystal control agent in the hydrothermal process. From the two-dimensional steps observed at tips of the whiskers, a possible growth mechanism was speculated that it was the extension of dislocations that made the growth of the whiskers.

Composition, technology and provenance of Roman pottery fromNapoca(Cluj-Napoca, Romania)

Clay Minerals ◽  
2018 ◽  
Vol 53 (4) ◽  
pp. 621-641 ◽  
Author(s):  
Ágnes Gál ◽  
Corina Ionescu ◽  
Mátyás Bajusz ◽  
Vlad A. Codrea ◽  
Volker Hoeck ◽  
...  
Keyword(s):  
Middle Miocene ◽  
Raw Materials ◽  
Ceramic Body ◽  
Polarized Light ◽  
Raw Material ◽  
Gradual Transition ◽  
X Ray ◽  
Fine Grained ◽  
The Matrix ◽  
Technological Constraints

ABSTRACTSecond-century CE (common era) household pottery sherds found in the city ofNapoca(present day Cluj-Napoca, Romania) in Roman Dacia were investigated by polarized light optical microscopy, X-ray powder diffraction, Fourier-transform infrared spectroscopy and cold field emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy to obtain information on technology, raw materials and site of production. Compositionally, all samples are similar with comparable fine and semi-fine microstructures and oriented microtextures. Optically, there is a gradual transition from microcrystalline to an amorphous illitic-muscovitic matrix. The small aplastic inclusions are mostly quartz and feldspar. Fine-grained carbonate aggregates are distributed inhomogeneously in the ceramic body. Well-preserved Middle Miocene foraminifera tests are characteristic of the ceramics. The gradual thermal changes of the matrix and the newly formed phases upon firing, such as ‘ceramic melilite’, Fe-gehlenite, clinopyroxene, glass, hematite and some maghemite support inferences regarding the technological constraints in producing the pottery. The firing took place in a mostly oxidizing atmosphere and the temperature extended from at least 850°C to >900°C. The Middle Miocene marly clay from the area surrounding the site shows similar mineralogical and micropalaeontological contents to those of the ceramic specimens and is the best candidate for the raw material used for local production of the Roman pottery.

scholarly journals Enhanced Photocatalytic Activity of Titania by Co-Doping with Mo and W

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 631 ◽  
Author(s):  
Osmín Avilés-García ◽  
Jaime Espino-Valencia ◽  
Rubí Romero-Romero ◽  
José Rico-Cerda ◽  
Manuel Arroyo-Albiter ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Absorption Capacity ◽  
Radiation Absorption ◽  
Experimental Conditions ◽  
X Ray ◽  
Assembly Method ◽  
Co Doped

Various W and Mo co-doped titanium dioxide (TiO2) materials were obtained through the EISA (Evaporation-Induced Self-Assembly) method and then tested as photocatalysts in the degradation of 4-chlorophenol. The synthesized materials were characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy (RS), N2 physisorption, UV-vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The results showed that the W-Mo-TiO2 catalysts have a high surface area of about 191 m2/g, and the presence of an anatase crystalline phase. The co-doped materials exhibited smaller crystallite sizes than those with one dopant, since the crystallinity is inhibited by the presence of both species. In addition, tungsten and molybdenum dopants are distributed and are incorporated into the anatase structure of TiO2, due to changes in red parameters and lattice expansion. Under our experimental conditions, the co-doped TiO2 catalyst presented 46% more 4-chlorophenol degradation than Degussa P25. The incorporation of two dopant cations in titania improved its photocatalytic performance, which was attributed to a cooperative effect by decreasing the recombination of photogenerated charges, high radiation absorption capacity, high surface areas, and low crystallinity. When TiO2 is co-doped with the same amount of both cations (1 wt.%), the highest degradation and mineralization (97% and 74%, respectively) is achieved. Quinones were the main intermediates in the 4-chlorophenol oxidation by W-Mo-TiO2 and 1,2,4-benzenetriol was incompletely degraded.

Sign in / Sign up

Export Citation Format

Share Document