scholarly journals Novel Negative Poisson’s Ratio Lattice Structures with Enhanced Stiffness and Energy Absorption Capacity

Materials ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1095 ◽  
Author(s):  
Zeyao Chen ◽  
Zhe Wang ◽  
Shiwei Zhou ◽  
Jianwang Shao ◽  
Xian Wu
Keyword(s):  
Energy Absorption ◽  
Poisson’S Ratio ◽  
Absorption Capacity ◽  
Poisson's Ratio ◽  
Lattice Structures ◽  
Negative Poisson’S Ratio ◽  
Energy Absorption Capacity ◽  
Negative Poisson's Ratio

scholarly journals In-plane Dynamic Crushing of a Novel Bio-inspired Re-entrant Honeycomb With Negative Poisson's Ratio 

2021 ◽  
Author(s):  
Yonghui Wang ◽  
Qiang He ◽  
Yu Chen ◽  
Hang Gu ◽  
Honggen Zhou
Keyword(s):  
Energy Absorption ◽  
Impact Velocity ◽  
Poisson’S Ratio ◽  
Dynamic Compression ◽  
Absorption Capacity ◽  
Poisson's Ratio ◽  
Negative Poisson’S Ratio ◽  
Energy Absorption Capacity ◽  
Plateau Stress ◽  
Negative Poisson's Ratio

Abstract In order to seek higher crashworthiness and energy absorption capacity, based on biological inspiration, a novel bio-inspired re-entrant honeycomb (BRH) structure with negative Poisson's ratio is designed by selecting lotus leaf vein as biological prototype. The numerical simulation model is established by the nonlinear dynamics software ABAQUS and further compared with the available reference results to verify the feasibility. The dynamic compression behavior and energy absorption capacity of two types of BRH (BRH-Ⅰ and BRH-Ⅱ) are firstly compared with conventional re-entrant honeycomb (RH). The simulation results show that BRH have better mechanical properties and energy absorption characteristics. Then, the crushing behavior of BRH-Ⅱ under different impact velocities are systematically studied. Three typical deformation modes of BRH-Ⅱ are observed through the analysis of deformation profile. The quasi-static plateau stress is closely related to the cellular structure. Based on one-dimensional shock theory, the empirical equations of dynamic plateau stress for BRH-Ⅱ with different relative densities are given by using least-square fitting. In addition, the effects of impact velocity and relative density on plateau stress and energy absorption behavior are also studied. The results show that the energy absorption capacity of BRH-Ⅱ is increased nearly six times compared with RH at the same impact velocity.

scholarly journals FEA and Quasi-static Test on Energy Absorption Characteristic of Space Orthogonal Concave Honeycomb Structure with Negative Poisson’s Ratio

2022 ◽  
Vol 2160 (1) ◽  
pp. 012064
Author(s):  
Nan Sun ◽  
Shuai Wang ◽  
Kaifa Zhou ◽  
Wenyi Ma ◽  
Bohao Xu
Keyword(s):  
Energy Absorption ◽  
Poisson’S Ratio ◽  
Honeycomb Structure ◽  
Absorption Capacity ◽  
Poisson's Ratio ◽  
Absorption Characteristic ◽  
Negative Poisson’S Ratio ◽  
Energy Absorption Capacity ◽  
Static Compression ◽  
Negative Poisson's Ratio

Abstract As a representative of metamaterials, negative Poisson’s ratio (NPR) material possesses special mechanical properties such as expansion, negative compression ratio and so forth. As a result, it is widely used in the fields of vehicles, aerospace, et al. In this paper, a novel space orthogonal concave honeycomb structure (OC) is designed based on traditional concave honeycomb structure (CHS). In order to explore the influence rule of OC structure on the deformation and energy absorption capacity of crash box under low-speed collision, mechanical analysis and parameter research on OC structure are conducted through quasi-static compression test and numerical simulation. The results suggest that the finite element results of OC structure fit well with the experimental results, and the FEM is highly credible. In addition, the novel OC sandwich structure can effectively enhance the deformation capacity and improve the energy absorption performance of the crash box. When the wall thickness ? of OC structure is 1mm and angle ? is 50°, the deformation and energy absorption capacity of the crash box increased by 25.6% and 19.3% respectively.

Energy Absorption of an Re-Entrant Honeycombs with Negative Poisson’s Ratio

2011 ◽  
Vol 148-149 ◽  
pp. 992-995 ◽  
Author(s):  
Shu Yang ◽  
Chang Qi ◽  
Dong Ming Guo ◽  
Dong Wang
Keyword(s):  
Energy Absorption ◽  
Poisson’S Ratio ◽  
Structural Response ◽  
Rigid Wall ◽  
Geometrical Model ◽  
Poisson's Ratio ◽  
Negative Poisson’S Ratio ◽  
Explicit Finite Element ◽  
Good Ability ◽  
Negative Poisson's Ratio

In the present paper, we have investigated a negative Poisson’s ratio structure with regular re-entrant cell shape to study its structural response under crush by rigid wall. Firstly, we created the geometry of cellular material in HYPERMESH. The developed geometrical model is imported into LS-DYNA. Then we use commercially available nonlinear explicit finite element code LS-DYNA to simulate the NPR material under uniformly distributed load. The deformation modes and energy absorption characteristics of NPR material were analyzed. Numerical results indicate that this NPR material have good ability of energy absorption.

3D-Printed Bio-inspired Zero Poisson’s Ratio Graded Metamaterials with High Energy Absorption Performance

2022 ◽  
Author(s):  
Ramin Hamzehei ◽  
Ali Zolfagharian ◽  
Soheil Dariushi ◽  
Mahdi Bodaghi
Keyword(s):  
Cell Wall ◽  
Energy Absorption ◽  
Poisson’S Ratio ◽  
High Energy ◽  
Absorption Capacity ◽  
Poisson's Ratio ◽  
Base Pairs ◽  
Energy Absorption Capacity ◽  
Static Compression ◽  
Unit Cells

Abstract This study aims at introducing a number of two-dimensional (2D) re-entrant based zero Poisson’s ratio (ZPR) graded metamaterials for energy absorption applications. The metamaterials’ designs are inspired by the 2D image of a DNA molecule. This inspiration indicates how a re-entrant unit cell must be patterned along with the two orthogonal directions to obtain a ZPR behavior. Also, how much metamaterials’ energy absorption capacity can be enhanced by taking slots and horizontal beams into account with the inspiration of the DNA molecule’s base pairs. The ZPR metamaterials comprise multi-stiffness unit cells, so-called soft and stiff re-entrant unit cells. The variability in unit cells’ stiffness is caused by the specific design of the unit cells. A finite element analysis (FEA) is employed to simulate the deformation patterns of the ZPRs. Following that, meta-structures are fabricated with 3D printing of TPU as hyperelastic materials to validate the FEA results. A good correlation is observed between FEA and experimental results. The experimental and numerical results show that due to the presence of multi-stiffness re-entrant unit cells, the deformation mechanisms and the unit cells’ densifications are adjustable under quasi-static compression. Also, the structure designed based on the DNA molecule’s base pairs, so-called structure F''', exhibits the highest energy absorption capacity. Apart from the diversity in metamaterial unit cells’ designs, the effect of multi-thickness cell walls is also evaluated. The results show that the diversity in cell wall thicknesses leads to boosting the energy absorption capacity. In this regard, the energy absorption capacity of structure ‘E’ enhances by up to 33% than that of its counterpart with constant cell wall thicknesses. Finally, a comparison in terms of energy absorption capacity and stability between the newly designed ZPRs, traditional ZPRs, and auxetic metamaterial is performed, approving the superiority of the newly designed ZPR metamaterials over both traditional ZPRs and auxetic metamaterials.

Multi-objective optimization of a novel crash box with a three-dimensional negative Poisson’s ratio inner core

2017 ◽  
Vol 233 (2) ◽  
pp. 263-275 ◽  
Author(s):  
ChunYan Wang ◽  
SongChun Zou ◽  
WanZhong Zhao
Keyword(s):  
Energy Absorption ◽  
Optimization Algorithm ◽  
Poisson’S Ratio ◽  
Inner Core ◽  
Three Dimensional ◽  
Poisson's Ratio ◽  
Negative Poisson’S Ratio ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Negative Poisson's Ratio

The crash box can absorb energy from the beam as much as possible, so as to reduce the collision damage to the front part of the car body and protect the safety of passengers. This work proposes a novel crash box filled with a three-dimensional negative Poisson’s ratio (NPR) inner core based on an inner hexagonal cellular structure. In order to optimize and improve the crash box’s energy absorption performance, the multi-objective optimization model of the NPR crash box is established, which combines the optimal Latin hypercube design method and response surface methodology. Then, the microstructure parameters are further optimized by the multi-objective particle swarm optimization algorithm to obtain an excellent energy absorption effect. The simulation results show that the proposed NPR crash box can generate smooth and controllable deformation to absorb the total energy, and it can further enhance the crashworthiness through the designed optimization algorithm.

scholarly journals The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson’s Ratio for High-Performance Static and Dynamic Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1353
Author(s):  
Chunxia Guo ◽  
Dong Zhao ◽  
Zhanli Liu ◽  
Qian Ding ◽  
Haoqiang Gao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Absorption ◽  
Poisson’S Ratio ◽  
Dynamic Compression ◽  
Equal Mass ◽  
Peak Force ◽  
Poisson's Ratio ◽  
Negative Poisson’S Ratio ◽  
Negative Poisson's Ratio ◽  
3D Printed

The synthesized understanding of the mechanical properties of negative Poisson’s ratio (NPR) convex–concave honeycomb tubes (CCHTs) under quasi-static and dynamic compression loads is of great significance for their multifunctional applications in mechanical, aerospace, aircraft, and biomedical fields. In this paper, the quasi-static and dynamic compression tests of three kinds of 3D-printed NPR convex–concave honeycomb tubes are carried out. The sinusoidal honeycomb wall with equal mass is used to replace the cell wall structure of the conventional square honeycomb tube (CSHT). The influence of geometric morphology on the elastic modulus, peak force, energy absorption, and damage mode of the tube was discussed. The experimental results show that the NPR, peak force, failure mode, and energy absorption of CCHTs can be adjusted by changing the geometric topology of the sinusoidal element. Through the reasonable design of NPR, compared with the equal mass CSHTs, CCHTs could have the comprehensive advantages of relatively high stiffness and strength, enhanced energy absorption, and damage resistance. The results of this paper are expected to be meaningful for the optimization design of tubular structures widely used in mechanical, aerospace, vehicle, biomedical engineering, etc.

Crashworthiness analysis of cylindrical tubes with coupling effects under quasi-static axial loading: An experimental and numerical study

2021 ◽  
pp. 146442072110533
Author(s):  
Hassan Mansoori ◽  
Ramin Hamzehei ◽  
Soheil Dariushi
Keyword(s):  
Energy Absorption ◽  
Poisson’S Ratio ◽  
Absorption Capacity ◽  
Negative Stiffness ◽  
Poisson's Ratio ◽  
Energy Absorption Capacity ◽  
Element Analysis ◽  
Assembly Method ◽  
Cylindrical Tubes ◽  
Force Displacement

In most cylindrical tubes, the occurrence of negative stiffness under compression is unavoidable. This downward trend in the force–displacement relationship means a decrease in the energy-absorption capacity. To this end, this paper introduces a new assembly method comprising two concentric cylindrical tubes. The inner cylinder possesses positive Poisson's ratio behavior, whereas the outer cylinder exhibits negative Poisson's ratio behavior. When compressed, the outer and inner cylinders shrink and expand, respectively, creating surface contacts between the two cylinders, called coupling effects. This property not only avoids the occurrence of negative stiffness in outer cylindrical tube, but also increases the energy-absorption capacity in an upward trend in the force–displacement relationship. To confirm this claim, three different types of cylindrical tubes, possessing positive Poisson’s ratio, zero Poisson's ratio, and negative Poisson’s ratio behaviors, are considered. A finite-element analysis is implemented to simulate deformation patterns of cylindrical tubes. Then, to verify the results of finite-element analysis, a laser-cutting method is applied to fabricate cylindrical tubes from stainless steel tubes. The results show that the proposed assembly method increases the energy-absorption capacity by up to 95% compared to the well-known auxetic tube. Next, a parametric study is performed, in which the gap space between the two cylinders is considered as a design variable. The results reveal the smaller the gap space, the higher the energy-absorption capacity. The absorbed energy in the assembled cylinders without gap space is 17.6 J, which is 36% greater than that of cylinders with 13 mm gap space. The effects of relative density and crushing speed are also evaluated. When compared to the crushing speed, the energy-absorption capacity is highly dependent on relative density.

Sign in / Sign up

Export Citation Format

Share Document