scholarly journals Modeling of Dynamic Behavior of Carbon Fiber-Reinforced Polymer (CFRP) Composite under X-ray Radiation

Materials ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 143 ◽  
Author(s):  
Kun Zhang ◽  
Wenhui Tang ◽  
Kunkun Fu
Keyword(s):  
Carbon Fiber ◽  
Dynamic Behavior ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
X Ray ◽  
Reinforced Polymer ◽  
Cfrp Composite ◽  
Carbon Fiber Reinforced

scholarly journals Evaluation of Electromechanical Properties and Conversion Efficiency of Piezoelectric Nanocomposites with Carbon-Fiber-Reinforced Polymer Electrodes for Stress Sensing and Energy Harvesting

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3184
Author(s):  
Yaonan Yu ◽  
Fumio Narita
Keyword(s):  
Carbon Fiber ◽  
Conversion Efficiency ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Potassium Sodium Niobate ◽  
Reinforced Polymer ◽  
Cfrp Composite ◽  
Carbon Fiber Reinforced ◽  
Stress Sensing

Wireless sensor networks are the future development direction for realizing an Internet of Things society and have been applied in bridges, buildings, spacecraft, and other areas. Nevertheless, with application expansion, the requirements for material performance also increase. Although the development of carbon-fiber-reinforced polymer (CFRP) to achieve these functions is challenging, it has attracted attention because of its excellent performance. This study combined the CFRP electrode with epoxy resin containing potassium sodium niobate piezoelectric nanoparticles and successfully polarized the composite sample. Furthermore, a three-point bending method was applied to compare the bending behavior of the samples. The peak output voltage produced by the maximum bending stress of 98.4 MPa was estimated to be 0.51 mV. Additionally, a conversion efficiency of 0.01546% was obtained. The results showed that the piezoelectric resin with CFRPs as the electrode exhibited stress self-inductance characteristics. This study is expected to be applied in manufacturing self-sensing piezoelectric resin/CFRP composite materials, paving the way for developing stable and efficient self-sensing structures and applications.

scholarly journals Chopped Carbon Fiber Reinforced Polymer Composites : Effect of Nanoclay on Adhesive and Abrasive Wear Properties

2019 ◽  
Vol 8 (4) ◽  
pp. 6836-6841
Keyword(s):  
Carbon Fiber ◽  
Abrasive Wear ◽  
Rolling Contact ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Wear Properties ◽  
Reinforced Polymer ◽  
Cfrp Composite ◽  
Carbon Fiber Reinforced

The present work investigates the wear properties of nanoclay-modified carbon fiber reinforced polymer (CFRP) composites when sliding under adhesive and abrasive wear. The specimens were fabricated using epoxy resin, short carbon fiber, and nanoclay filler of 1.0wt%, 3.0wt%, and 5.0wt% content. The wear tests were conducted using pin-on-disc and abrasion resistance test rig for adhesive and abrasive wear condition, respectively. Operating parameters were fixed at 30N load, 300rpm speed and 10km distance for both tests. Pure CFRP composite exhibited lower wear performance compared to pure epoxy in both test conditions. However, with nanoclay incorporation, the wear properties of CFRP composite have improved up to 56% and 44% under adhesive and abrasive wear, respectively. Therefore, the composite reinforced polymer of carbon fiber and nanoclay filler in epoxy matrix provides a synergistic effect under adhesive and abrasive wear conditions. The experimental findings suggest that the CFRP composite has the potential for tribological components and application such as sliding-contact and rolling-contact bearings.

Sign in / Sign up

Export Citation Format

Share Document